폐석회지반에서의 연직배수재의 종류에 따른 통수능 평가

Evaluation of Discharge Capacity with PVDs Types in Waste Lime Area

최근 경제가 성장함에 따라 산업지역과 거주지의 요구가 증가하고 있다. 그러나 양질의 지반상태 지역을 구하기가 어렵다. 경제적이고 균형적인 지역 발전을 위하여 내륙지역 뿐만 아니라 연약지반에도 새로운 프로젝트가 수행되고 있다. 연약지반은 복잡한 공학적 특성과 강도가 낮고 대상 지역의 심도가 깊은 많은 변수를 가지고 있기 때문에 연약지반의 공학적 특성을 정확하게 분석하고 안정적인 계측과 경제적인 설계와 관리방법을 찾는것이 필요하다. 연직배수공법은 프리로딩과 통수능력을 가진 여러 종류의 배수재를 사용하여 연약지반과 퇴적지반의 압밀촉진을 위하여 많이 사용되고 있다. 본 논문에서는 폐석회 지반에 2가지 형태의 연직배수재를 적용하여 통수능력 분석하였다.

Recently, the demand for industrial and residential lands are being increased with economic growth, however, it is difficult to acquire the land for development with good ground condition. For efficient and balanced development of land, new development projects are being carried out not only the areas with inland but those with the soft ground as well. As soft grounds have complex engineering properties and high variations such as ground settlement especially when their strength is low and depth is deep, it needs to accurately analyze the engineering properties of soft grounds and find general measurement for stabilization and economic design and management. Prefabricated vertical drain technology is widely used to accelerate the consolidation of soft clay deposits and dredged soil under the preloading and various types of vertical drain are being used with the discharge capacity. Under field conditions, the discharge capacity is changed with various reason, such as soil condition, confinement pressure, long-term clogging and folding of vertical drains, and so on. Therefore, many researcher and engineer recommend the use of required discharge capacity. In this paper, the experimental study were carried out for two different types of vertical drains by utilizing the large-scale model tests and waste lime.