The Transactions of The Korean Institute of Electrical Engineers (전기학회논문지)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Optimal Tuning of Nonlinear Parameters of a Dual-Input Power System Stabilizer Based on Analysis of Trajectory Sensitivities

궤도민감도 분석에 기반하여 복입력 전력시스템 안정화 장치(Dual-Input PSS)의 비선형 파라미터 최적화 기법

  • 백승묵 (연세대 공대 전기전자공학부) ;
  • 박정욱 (연세대 공대 전기전자공학부)
  • Published : 2008.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper focuses on optimal tuning of nonlinear parameters of a dual-input power system stabilizer(dual-input PSS), which can improve the system damping performance immediately following a large disturbance. Until recently, various PSS models have developed to bring stability and reliability to power systems, and some of these models are used in industry applications. However, due to non-smooth nonlinearities from the interaction between linear parameters(gains and time constants of linear controllers) and nonlinear parameters(saturation output limits), the output limit parameters cannot be determined by the conventional tuning methods based on linear analysis. Only ad hoc tuning procedures('trial and error' approach) have been used. Therefore, the steepest descent method is applied to implement the optimal tuning of the nonlinear parameters of the dual-input PSS. The gradient required in this optimization technique can be computed from trajectory sensitivities in hybrid system modeling with the differential-algebraic-impulsive-switched(DAIS) structure. The optimal output limits of the dual-input PSS are evaluated by time-domain simulation in both a single machine infinite bus(SMIB) system and a multi-machine power system in comparison with those of a single-input PSS.

Keywords

References

  1. P. Kundur, M. Klein, G.J. Rogers, and M.S. Zywno, "Application of Power System Stabilizers for Enhancement of Overall System Stability," IEEE Transactions on Power Systems, Vol.4, No.2, pp. 614-626, May 1989 https://doi.org/10.1109/59.193836
  2. M. Klein, G. J. Rogers, S. Moorty, and P. Kundur, "Analytical Investigation of Factors Influencing Power System Stabilizers Performance", IEEE Transactions on Energy Conversion, Vol. 7, No. 3, pp. 382-388, September 1992 https://doi.org/10.1109/60.148556
  3. N. Martins and L. T. G. Lima, "Determination of Suitable Locations for Power System Stabilizers and Static VAr Compensators for Damping Electromechanical Oscillations in Large Scale Power Systems", in Proceeding of Power Industry Computer Application, pp.74-82, May 1989
  4. Prabha Kundur, Power system stability and Control, EPRI Editors, McGraw-Hill, Inc. ISBN0-07-035958-X, 1993
  5. A. van der Schaft and H. Schumacher, An Introduction to Hybrid Dynamical Systems, Springer-Verlag, London, 2000
  6. D. Liberzon, Switching in Systems and Control, Birkhauser, Boston, 2003
  7. Ian A. Hiskens and M. A. Pai, "Trajectory Sensitivity Analysis of Hybrid Systems", IEEE Transactions on Circuits and Systems-Part I: Fundamental Theory and Applications, Vol.47, No.2, pp. 204-220, February 2000 https://doi.org/10.1109/81.828574
  8. M. S. Branicky, V. S. Borkar, and S. K. Mitter, "A unified framework for hybrid control: Model and optimal control theory", IEEE Transactions on Automatic Control, Vol. 43, pp. 31-45, January 1998 https://doi.org/10.1109/9.654885
  9. J. Nocedal and S. J. Wright, ed., Numerical Optimization, Springer-Verlag, New York, 1999
  10. P. W Sauer and M. A Pai, Power System Dynamics and Stability. Englewood Cliffs, NJ: Prentice-Wall, 1998
  11. P. Venkataraman, Applied Optimization with MATLAB${\circled}R$ Programming, Wiley-Interscience, 2001