DOI QR코드

DOI QR Code

라디칼 인젝터를 적용한 연소실의 신기유입특성에 관한 연구

The Inflow Characteristics of Fresh Air in the Combustion Chamber having the Radical Injector

  • 발행 : 2008.05.31

초록

The engine containing a radical injector has been studied to improve the performances of efficiency and to reduce the exhaust emissions recently. The engine is far different from general compression ignition engines or spark ignition engines for the concept of combustion process. The inflow characteristic from main chamber into radical chamber during compression stroke is important because the radical chamber must have enough fresh air to generate appropriate radicals. The numerical simulation is performed in each specific shape and the engine speed by using KIVA code. The result shows that the fresh air inflow from main chamber into the radical chamber is the best at 45 degree of the hole angle.

키워드

참고문헌

  1. Gaydon, A. G. and Wolfhard, H. G., Flames, Their Structure. Radiation and Temperature(3rd edn), London, Chapman and Hall Press, 1970
  2. Gaydon, A.G., Spectroscopy of flames, Waily Press, 1957
  3. Kong, S. and Ricart, L.M. and Reitz, R.D., 'In-cylinder Diesel Flame Imaging Compared with Numerical Computations', SAE 950455, 1995
  4. Nagaoka M., Kawazoe, H. and Naomi N., 'Modeling Fuel Spary Impingement on a Hot Wall for Gasoline Engines', SAE 940525, 1994
  5. Stephenson, P.W. and Rutland, C.J., 'Modeling the Effects of Intake Flow Characteristics on Diesel Engine Combustion', SAE 950282, 1995
  6. Kawabata, Y. Nakagawa, K. and Shoji, F., 'Operating Characteristics of Natural Gas Fueled Homogeneous Charge Compression Ignition', Energy Technology Research Institute, Vol.8, 1998
  7. Gentili, R., Stefano F., Leonardo T., Patrice H. and Jacques L., 'Experimental Study on ATAC (Active Thermo-Atmo sphere Combustion) in a Two-Stroke Gasoline Engine', SAE Paper 970363, 1997
  8. 박세익, 국상훈, 배충식, '고온흡기를 적용한 예혼합 압축착화 디젤 엔진에서 EGR 율에 따른 엔진효율 및 배기가스 변화', 춘계학술대회 논문집 1호, pp. 478-483, 2006
  9. 김형민, 류재덕, 이기형, '예혼합 압축착화 엔진의 혼합기 형성 및 연소 특성에 관한 연구', 한국자동차공학회 논문집 14권 3호, pp. 1-9, 2006