DOI QR코드

DOI QR Code

Effect of Blade Angle on the Performance of a Cross-Flow Hydro Turbine

  • Choi, Young-Do (Korea Maritime University, Industry-Academic Cooperation Foundation) ;
  • Lim, Jae-Ik (Korea Marine Equipment Research Institute) ;
  • Kim, You-Taek (Korea Maritime University, Department of Marine System Engineering) ;
  • Lee, Young-Ho (Korea Maritime University, Division of Mechanical and Information Engineering)
  • 발행 : 2008.05.31

초록

In order to improve the performance of cross-flow hydro turbine, detailed examination of the effect of the turbine configuration on the performance is needed necessarily. Therefore, this study is aimed to investigate the effect of blade angle on the performance of the cross-flow hydro turbine. Analysis of the turbine performance with the variation of the blade angle has been made by using a commercial CFD code. The results show that inlet and outlet angles of runner blade give considerable effect on the performance of the turbine. Pressure on the surface of the runner blade changes remarkably by the blade angle both at the Stages 1 and 2. Moreover, relatively small blade inlet angle is effective to produce higher value of output power. Recirculating flow in the runner passage causes remarkable hydraulic loss.

키워드

참고문헌

  1. Mockmore, C. A. and Merryfield, F., "The Banki Water Turbine," No. 25, Engineering Experiment Station, Oregon State Colleg, Corvallis, Oregon, 1945.
  2. Khosrowpanah, S., Fiuzat, A. A. and Albertson, M. L., "Experimental Study of Cross-Flow Turbine," Journal of Hydraulic Engineering, Vol. 114, No. 3, pp. 299-314, 1988. https://doi.org/10.1061/(ASCE)0733-9429(1988)114:3(299)
  3. Fiuzat, A. A. and Akerkar, B. P., "Power Outputs of Two Stages of Cross-Flow Turbine," Journal of Energy Engineering, Vol. 117, No. 2, pp. 57-70, 1991. https://doi.org/10.1061/(ASCE)0733-9402(1991)117:2(57)
  4. Desai, V. R. and Aziz, N. M., "An Experimental Investigation of Cross- Flow Turbine Efficiency," Journal of Fluids Engineering, Vol. 116, pp. 545-550, 1944. https://doi.org/10.1115/1.2910311
  5. Fukutomi, J., Nakase, Y. and Watanabe, T., "A Numerical Method of Free Jet from a Cross-flow Turbine Nozzle," Bulletin of JSME, Vol. 28, No. 241, pp. 1436-1440, 1985. https://doi.org/10.1299/jsme1958.28.1436
  6. Fukutomi, J., Senoo, Y. and Nakase, Y., "A Numerical Method of Flow through a Cross-Flow Runner," JSME International Journal, Series II, Vol. 34, No. 1, pp. 44-51, 1991.
  7. Fukutomi, J., Nakase, Y., Ichimiya, M. and Ebisu, H., "Unsteady Fluid Forces on a Blade in a Cross-Flow Turbine," JSME International Journal, Series B, Vol. 38, No. 3, pp. 404-410, 1995. https://doi.org/10.1299/jsmeb.38.404
  8. Choi, Y-D., Zhao, L. and Kurokawa, J., "A Study on the Optimal Configu- ration and Performance Improvement of a Micro Cross-Flow Hydraulic Turbine," Journal of the Korean Society of Marine Engineering, Vol. 30, No. 2, pp. 296-303, 2006.
  9. ANSYS Inc., "ANSYS CFX Documentation," Ver. 11, http://www.ansys.com, 2007.