DOI QR코드

DOI QR Code

Using frequency response function and wave propagation for locating damage in plates

  • Quek, Ser-Tong (Department of Civil Engineering, National University of Singapore) ;
  • Tua, Puat-Siong (Department of Civil Engineering, National University of Singapore)
  • 투고 : 2005.08.16
  • 심사 : 2007.11.02
  • 발행 : 2008.05.25

초록

In this study, the frequency domain method which utilizes the evaluation of changes in the structural mode shape is adopted to identify regions which contain localized damages. Frequency response function (FRF) values corresponding to the modal frequency, analogous to the mode shape coefficients, are used since change in natural frequency of the system is usually insignificant for localized damage. This method requires only few sensors to obtain the dynamic response of the structure at specific locations to determine the FRF via fast-Fourier transform (FFT). Numerical examples of an aluminum plate, which includes damages of varying severity, locations and combinations of multiple locations, are presented to demonstrate the feasibility of the method. An experimental verification of the method is also done using an aluminum plate with two different degrees of damage, namely a half-through notch and a through notch. The inconsistency in attaining the FRF values for practical applications due to varying impact load may be overcome via statistical averaging, although large variations in the loading in terms of the contact duration should still be avoided. Nonetheless, this method needs special attention when the damages induce notable changes in the modal frequency, such as when the damages are of high severity or cover more extensive area or near the boundary where the support condition is modified. This is largely due to the significant decrease in the frequency term compared to the increase in the vibration amplitude. For practical reasons such as the use of limited number of sensors and to facilitate automation, extending the resolution of this method of identification may not be efficient. Hence, methods based on wave propagation can be employed as a complement on the isolated region to provide an accurate localization as well as to trace the geometry of the damage.

키워드

참고문헌

  1. Cawley, P. and Adams, R. D. (1979a), "The location of defects in structures from measurements of natural frequencies", J. Strain Anaylysis, 14(2), 49-57. https://doi.org/10.1243/03093247V142049
  2. Ewins, D. J. (1984), Modal Testing: Theory and Practice (Research Studies Press, England).
  3. Hwang, H. Y. and Kim, C. (2004), "Damage detection in structures using few frequency response measurements", J. Sound Vib., 270(1), 1-14. https://doi.org/10.1016/S0022-460X(03)00190-1
  4. Hwang, H. Y. (1998), "Identification techniques of structure connection parameters using frequency response functions", J. Sound Vib., 212(3), 469-479. https://doi.org/10.1006/jsvi.1997.1433
  5. Kim, J. T., Ryu. Y. S., Cho, H. M. and Stubbs, N. (2003), "Damage identification in beam-type structures: frequency-based method vs mode-shape-based method", Eng. Struct., 25, 57-67. https://doi.org/10.1016/S0141-0296(02)00118-9
  6. Owolabi, G. M., Swamidas, A. S. J. and Seshadri, R. (2003), "Crack detection in beams using changes in frequencies and amplitudes of frequency response functions", J. Sound Vib., 265(1), 1-22. https://doi.org/10.1016/S0022-460X(02)01264-6
  7. Pandey, A. K. and Biswas, M. (1994), "Damage detection in structures using changes in flexibility", J. Sound Vib., 169(1), 3-17. https://doi.org/10.1006/jsvi.1994.1002
  8. Quek, S. T., Jin, J. and Tua, P. S. (2004), "Comparison of plain piezoceramics and inter-digital transducer for crack detection in plates", Smart Structures and Materials / NDE for Health Monitoring and Diagnostics 14-18 March, 2004, Town and Country Resort & Convention Center, San Diego, California USA.
  9. Quek, S. T., Tua, P. S. and Wang, Q. (2003a), "Detecting anomaly in beams and plate based on Hilbert-Huang transform of real signals", Smart Mater. Struct., 12(3), 447-460. https://doi.org/10.1088/0964-1726/12/3/316
  10. Quek, S. T., Tua, P. S. and Wang, Q. (2003b), "Comparison of hilbert-huang, wavelet and fourier transforms for selected applications", Mini-Symposium on Hilbert-Huang Transform in Engineering Applications October 31 - November 01, 2003, Newark, Delaware.
  11. Salawu, O. S. (1997), "Detection of structural damage through changes in frequency: A review", Eng. Struct., 19(9), 718-723. https://doi.org/10.1016/S0141-0296(96)00149-6
  12. Samman, M. M. and Biswas, M. (1994a), "Vibration testing for nondestructive evaluation of bridges I: theory", J. Struct. Eng., ASCE, 120, 269-289. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:1(269)
  13. Samman, M. M. and Biswas, M. (1994b), "Vibration testing for nondestructive evaluation of bridges II: results", J. Struct. Eng., ASCE, 120, 290-306. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:1(290)
  14. Sampaio, R. P. C., Maia, N. M. M. and Silva, J. M. M. (1999), "Damage detection using frequency-responsefunction curvature method", J. Sound Vib., 226(5), 1029-1042. https://doi.org/10.1006/jsvi.1999.2340
  15. Schwarz, B. J. and Richardson, M. H. (1999), "Experimental modal analysis", CSI 9th Annual Technology and Training Conference, Reliability Week, Oct 4-7 1999, Orlando, Florida USA.
  16. Thyagarajan, S. K., Schulz, M. J. and Pai, P. F. (1998), "Detecting structural damage using frequency response functions", J. Sound Vib., 210(1), 162-170. https://doi.org/10.1006/jsvi.1997.1308
  17. Tua, P. S., Quek, S. T. and Wang, Q. (2004a), "Detection of cracks in plates using piezo-actuated Lamb waves", Smart Mater. Struct., 13(4), 643-660. https://doi.org/10.1088/0964-1726/13/4/002
  18. Tua, P. S., Quek, S. T. and Wang, Q. (2004b), "Detection of crack in cylindrical pipes and plates using piezoactuated Lamb waves", Smart Mater. Struct. (Under review).

피인용 문헌

  1. Differential quadrature method for frequency analysis of membranes having irregular domains using an eight-node curvilinear element vol.5, pp.5, 2008, https://doi.org/10.12989/sss.2009.5.5.587
  2. Locating the damaged storey of a building using distance measures of low-order AR models vol.6, pp.9, 2008, https://doi.org/10.12989/sss.2010.6.9.991