Smart Structures and Systems

  • 제4권1호
  • /
  • Pages.85-98
  • /
  • 2008
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Design of an actuator for simulating wind-induced response of a building structure

  • Park, Eun Churn (Department of Architectural Engineering, Dankook University) ;
  • Lee, Sang-Hyun (Department of Architectural Engineering, Dankook University) ;
  • Min, Kyung-Won (Department of Architectural Engineering, Dankook University) ;
  • Chung, Lan (Department of Architectural Engineering, Dankook University) ;
  • Lee, Sung-Kyung (Department of Architectural Engineering, Dankook University) ;
  • Cho, Seung-Ho (Department of Architectural Engineering, Dankook University) ;
  • Yu, Eunjong (Department of Architectural Engineering, Hanyang University) ;
  • Kang, Kyung-Soo (Department of Architectural Engineering, Tongmyong University)
  • 투고 : 2006.10.30
  • 심사 : 2007.08.09
  • 발행 : 2008.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, excitation systems using a linear mass shaker (LMS) and an active tuned mass damper (ATMD) are presented to simulate the wind induced responses of a building structure. The actuator force for the excitation systems is calculated by using the inverse transfer function of a target structural response to the actuator. Filter and envelop functions are used to prevent the actuator from exciting unexpected modal responses and an initial transient response and thus, to minimize the error between the wind and actuator induced responses. The analyses results from a 76-story benchmark building problem for which the wind load obtained by a wind tunnel test is given, indicate that the excitation system installed at a specific floor can approximately reproduce the structural responses induced by the wind load applied to each floor of the structure. The excitation system designed by the proposed method can be effectively used for evaluating the wind response characteristics of a practical building structure and for obtaining an accurate analytical model of the building under wind load.

키워드

참고문헌

  1. Alvin, K. F. and Park, K. C. (1994), "Second-order structural identification procedure via state-space-based system identification", AIAA J., 32, 397-406. https://doi.org/10.2514/3.11997
  2. Au, F. T. K., Jiang, R. J. and Cheung, Y. K. (2004), "Parameter identification of vehicles moving on continuous bridges", J. Sound. Vib., 269, 91-111. https://doi.org/10.1016/S0022-460X(03)00005-1
  3. Dyke, S. J., Spencer Jr., B. F., Quast, P., Sain, M. K., Kaspari Jr., D. C. and Soong, T. T. (1994), "Experimental verification of acceleration feedback control strategies for an active tendon system", Technical Report NCEER-94-0024, State University of New York at Buffalo, Buffalo, NY.
  4. Friswell, M. I. and Mottershead, J. E. (1995), Finite Element Model Updating in Structural Dynamics, Kluwer Academic Publishers, Boston, London.
  5. Herman, V. A. and Bart, P. (2003), "Sensors and systems for structural health monitoring", J. Struct. Cont., 10, 117-125. https://doi.org/10.1002/stc.21
  6. Juang, J. N. (1994), Applied System Identification, Prentice Hall, Englewood Cliffs, NJ.
  7. Ljung, L. (1987), System Identification: Theory for the User, Prentice Hall, Englewood Cliffs, NJ.
  8. Madenci, E. and Barut, A. (1994), "A free-formulation-based flat shell element for non-linear analysis of thin composite structures", Int. J. Numer. Meth. Eng., 37, 3825-3842. https://doi.org/10.1002/nme.1620372206
  9. Yang, J. N., Agrawal, A. K., Samali, B. and Wu, J. C. (1999), "A benchmark problem for response control of wind-excited tall buildings", World Wide Website, http://www.eng.uci.edu/-jnyang/benchmark.htm.
  10. Yu, E., Whang, D. H., Conte, J. P., Stewart, J. P. and Wallace, J. W. (2005), "Forced vibration testing of buildings using the linear shaker seismic simulation (LSSS) testing method", Earthq. Eng. Struct. Dyn., 34, 737-761. https://doi.org/10.1002/eqe.453