DOI QR코드

DOI QR Code

Shear-bending interaction strength of locally buckled I-sections

  • El Aghoury, M. (Department of Structural Engineering, Ain Shams University) ;
  • Hanna, M.T. (Department of Structure and Metallic Construction, Housing and Building Research Center)
  • 투고 : 2007.12.02
  • 심사 : 2008.02.28
  • 발행 : 2008.04.25

초록

In slender sections there is a substantial post-buckling strength provided after the formation of local buckling waves. These waves happened due to normal stresses or shear stresses or both. In this study, a numerical investigation of the behavior of slender I-section beams in combined pure bending and shear has been described. The studied cases were assumed to be prevented from lateral torsional buckling. To achieve this aim, a finite element model that simulates the geometric and material nonlinear nature of the problem has been developed. Moreover, the initial geometric imperfections were included in the model. Different flange and web width-thickness ratios as well as web panel aspect ratios have been considered to draw complete set of interaction diagrams. Results reflect the interaction behavior between flange and web in resisting the combined action of moments and shear. In addition, the web panel aspect ratio will not significantly affect the combined ultimate shear-bending strength as well as the post local buckling strength gained by the section. Results are compared with that predicted by both the Eurocode 3 and the American Iron and Steel specifications, AISI-2001. Finally, an empirical interaction equation has been proposed.

키워드

참고문헌

  1. AISI (2001), North American Specification for the Design of Cold-Formed Steel Structural Members.
  2. Basler, K. (1961), "Strength of plate girders in shear", J. Struct Div, ASCE, 87(7),151-180.
  3. Basler, K. (1961), "Strength of plate girders in combined bending and shear", J. Strucrt. Div, ASCE, 87(7),181-197.
  4. Bradford, M. A. and Hancock, G. J. (1984), "Elastic interaction of local and lateral buckling in beams", Thin-Walled Struct., 2(1), p.1-25. https://doi.org/10.1016/0263-8231(84)90013-2
  5. Cherry, S. (1960), "The stability of beams with buckled compression flanges", Struct. Eng., 38(9), 277-85.
  6. Eurocode 3, prEN 1993. (2005), Design of Steel Structures, Part 1-5: Strength and stability of planar plated structures without transverse loading.
  7. Hoglund, T. (1997), " Shear buckling resistance of steel and aluminium plate girders", Thin-Walled Struct. 29,13-30. https://doi.org/10.1016/S0263-8231(97)00012-8
  8. Lee, S. C. and Yoo, C. H. (1998), "Strength of plate girder web panels under pure shear", J. Struct. Eng ASCE, 124(2),184-194.
  9. Porter, D.M., Rockey, K.C. and Evans, H.R. (1975), "The collapse behaviour of plate girders loaded in shear", The Struct. Eng., 53 (8),313-325.
  10. Roberts, T.M. and Shahabian, F. (2001), "Ultimate resistance of slender web panels to combined bending shear and patch loading", J. Constr. Steel Res. 57,779-790. https://doi.org/10.1016/S0143-974X(01)00009-8
  11. Rockey, K.C. and Skaloud, M. (1972), "The Ultimate load behaviour of plate girders loaded in shear", The Struct Eng., 50(1),.29-47.
  12. Salem, A.H., El Aghoury, M., El Dib, F.F. and Hanna, M.T. (2004), "Ultimate capacity of I-slender section columns", J. Constr. Steel Res, 60, 1193-1211. https://doi.org/10.1016/j.jcsr.2003.10.003
  13. Salem, A.H., El Aghoury, M., El Dib, F.F. and Hanna, M.T. (2005). "Strength of slender I-section beams", 4th European conference on steel and composite structures, Eurosteel 2005, Maastricht, The Netherlands, June.
  14. Salem, A.H., El Aghoury, M., El Dib, F.F. and Hanna, M.T. (2007), "Strength of biaxially loaded slender Isection beam-columns", Can. J. Civ. Eng., 34, (2), 219-227. https://doi.org/10.1139/l06-091
  15. Schafer, B.W. (2002), "Design manual for the direct strength method of cold-formed steel design", Final Report to the American Iron and Steel Institute, Washington, D.C.
  16. Shahabian, F. and Roberts, T.M. (1999), "Buckling of slender web plates subjected to combinations of in plane loading", J. Constr. Steel Res., 51,1-19. https://doi.org/10.1016/S0143-974X(99)00002-4
  17. Winter, G. (1968), "Thin walled structures-theoretical solutions and test results", Eighth Congress, IABSE.

피인용 문헌

  1. Failure loads of web panels loaded in pure shear vol.105, 2015, https://doi.org/10.1016/j.jcsr.2014.10.021