DOI QR코드

DOI QR Code

Numerical analysis of spalling of concrete cover at high temperature

  • 투고 : 2007.11.01
  • 심사 : 2008.04.01
  • 발행 : 2008.08.25

초록

In the present paper a 3D thermo-hygro-mechanical model for concrete is used to study explosive spalling of concrete cover at high temperature. For a given boundary conditions the distribution of moisture, pore pressure, temperature, stresses and strains are calculated by employing a three-dimensional transient finite element analysis. The used thermo-hygro-mechanical model accounts for the interaction between hygral and thermal properties of concrete. Moreover, these properties are coupled with the mechanical properties of concrete, i.e., it is assumed that the mechanical properties (damage) have an effect on distribution of moisture (pore pressure) and temperature. Stresses in concrete are calculated by employing temperature dependent microplane model. To study explosive spalling of concrete cover, a 3D finite element analysis of a concrete slab, which was locally exposed to high temperature, is performed. It is shown that relatively high pore pressure in concrete can cause explosive spalling. The numerical results indicate that the governing parameter that controls spalling is permeability of concrete. It is also shown that possible buckling of a concrete layer in the spalling zone increases the risk for explosive spalling.

키워드

참고문헌

  1. Bazant, Z. P. and Cusatis, G. (2005), "Concrete creep at high temperature and its interaction with fracture: Recent progress", CONCREEP-7, Ed. Pijaudier-Cabot, Gerard & Acker, Hermes Science, 449-460.
  2. Bazant, Z. P. and Kaplan, M. F. (1996), Concrete at High Temperatures: Material Properties and Mathematical Models, Harlow, Longman.
  3. Bazant, Z. P. and Thonguthai W. (1978), "Pore pressure and drying concrete at high temperature", ASCE J. Eng. Mech., 104, 1059-1079.
  4. Belytschko, T., Liu, W. K. and Moran, B. (2001), Nonlinear Finite Elements for Continua and Structures, John Wiley & Sons Ltd.
  5. Gawin, D., Majorana, C. E. and Schrefler, B. A. (1999), "Numerical analysis of hygro-thermal behavior and damage of concrete at high temperature", Mechanics of Cohesive Frictional Materials, 4, 37-74. https://doi.org/10.1002/(SICI)1099-1484(199901)4:1<37::AID-CFM58>3.0.CO;2-S
  6. Gawin, D., Pesavento, F. and Schrefler B. A. (2006), "Towards prediction of the thermal spalling risk through a multi phase porous media model of concrete", Comput. Methods Appl. Mech. Eng., 195, 5707-5729. https://doi.org/10.1016/j.cma.2005.10.021
  7. Harmathy, T. Z. and Allen, L. W. (1973), "Thermal properties of selected masonry unit concretes", J. Amer. Inst., 70, 132-144.
  8. Khoury, G. A., Grainger, B. N. and Sullivan, P. J. E. (1985), "Transient thermal strain of concrete: literature review, conditions within specimens and behaviour of individual constituents", Mag. Concrete Res., 37(132), 131-144. https://doi.org/10.1680/macr.1985.37.132.131
  9. Khoury, G. A. (2006), "Strain of heated concrete during two thermal cycles - Parts 1,2 and 3", Mag. Concrete Res., 58(6), 367-385. https://doi.org/10.1680/macr.2006.58.6.367
  10. Khoury, G. A. (2006), "Strain of heated concrete during two thermal cycles - Parts 1,2 and 3", Mag. Concrete Res., 58(6), 387-400. https://doi.org/10.1680/macr.2006.58.6.387
  11. Khoury, G. A. (2006), "Strain of heated concrete during two thermal cycles - Parts 1,2 and 3", Mag. Concrete Res., 58(7), 421-435. https://doi.org/10.1680/macr.2006.58.7.421
  12. Nielsen, C. V., Pearce, C. J. and Biani, N. (2002), "Theoretical model of high temperature effects on uniaxial concrete member under elastic restraint", Mag. Concrete Res., 54(4), 239-249. https://doi.org/10.1680/macr.2002.54.4.239
  13. Ozbolt, J., Li, Y.-J. and Kozar, I. (2001), "Microplane model for concrete with relaxed kinematic constraint", Int. J. Solids Struct., 38, 2683-2711. https://doi.org/10.1016/S0020-7683(00)00177-3
  14. Ozbolt, J., Kozar, I., Eligehausen, R. and Periskic, G. (2005), "Three-dimensional FE analysis of headed stud anchors exposed to fire", Comput. Concrete, 2(4), 249-266. https://doi.org/10.12989/cac.2005.2.4.249
  15. Schneider, U. (1986), Properties of Materials at High Temperatures, Concrete, 2nd. Edition, RILEM Technical Comitee 44-PHT, Technical University of Kassel, Kassel.
  16. Tenchev, R. T., Li, L. Y. and Purkiss, J. A. (2001), "Finite element analysis of coupled heat and moisture transfer in concrete subjected to fire", Numerical Heat Transfer, 39, 685-710. https://doi.org/10.1080/10407780119853
  17. Thelandersson, S. (1983), "On the multiaxial behaviour of concrete exposed to high temperature", Nucl. Eng. Design, 75(2), 271-282. https://doi.org/10.1016/0029-5493(83)90023-7
  18. Therrien, R. and Sudicky, E. A. (1996), "Three-dimensional analysis of variably-saturated flow and solute transport in discretely-fractured porous media", J. Contaminant Hydrology, 23(1-2), 1-44. https://doi.org/10.1016/0169-7722(95)00088-7
  19. Wang, K., Jansen, D. C. and Shah, P. S. (1997), "Permeability study of cracked concrete", Cement Concrete Res., 27(3), 381-393. https://doi.org/10.1016/S0008-8846(97)00031-8
  20. Zhang, B. and Bicanic, N. (2002), "Residual fracture toughness of normal- and high-strength gravel concrete after heating to 600oC", ACI Mater J., 99(3), 217-226.
  21. Zieml, M., Leithner, D., Lackner, R. and Mang, H. A. (2006), "How do polypropylene fibers improve the spalling behavoiur of in-situ concrete", Cement Concrete Res., 36(5), 929-942. https://doi.org/10.1016/j.cemconres.2005.12.018

피인용 문헌

  1. Analysis of coupled transport phenomena in concrete at elevated temperatures vol.219, pp.13, 2013, https://doi.org/10.1016/j.amc.2011.02.064
  2. 3D numerical analysis of reinforced concrete beams exposed to elevated temperature vol.58, 2014, https://doi.org/10.1016/j.engstruct.2012.11.030
  3. Permeability measurement on high strength concrete without and with polypropylene fibers at elevated temperatures using a new test setup vol.53, 2013, https://doi.org/10.1016/j.cemconres.2013.06.005
  4. Experimental and numerical study of hygro-thermo-mechanical properties of “Schilfsandstein” from Baden-Württemberg vol.56, pp.3-4, 2008, https://doi.org/10.1007/s00254-008-1467-x
  5. The virtual penetration laboratory: new developments for projectile penetration in concrete vol.7, pp.2, 2008, https://doi.org/10.12989/cac.2010.7.2.087
  6. Integration of the microplane constitutive model into the EPIC code vol.7, pp.2, 2008, https://doi.org/10.12989/cac.2010.7.2.145
  7. Numerical procedures for extreme impulsive loading on high strength concrete structures vol.7, pp.2, 2008, https://doi.org/10.12989/cac.2010.7.2.159
  8. The high-rate brittle microplane concrete model: Part I: bounding curves and quasi-static fit to material property data vol.9, pp.4, 2008, https://doi.org/10.12989/cac.2012.9.4.293
  9. Effect of cooling rate on the post-fire behavior of CFST column vol.23, pp.4, 2008, https://doi.org/10.12989/cac.2019.23.4.281
  10. Impact Analysis of Thermally Pre-Damaged Reinforced Concrete Frames vol.13, pp.23, 2020, https://doi.org/10.3390/ma13235349
  11. Assessment of the post-fire residual bearing capacity of FRC and hybrid RC-FRC tunnel sections considering thermal spalling vol.54, pp.6, 2021, https://doi.org/10.1617/s11527-021-01819-2