DOI QR코드

DOI QR Code

A new approach for nonlinear finite element analysis of reinforced concrete structures with corroded reinforcements

  • Shayanfar, Mohsen A. (Civil Engineering Department, Iran University of Science and Technology) ;
  • Safiey, Amir (Moshanir Consultants Engineering Inc.)
  • 투고 : 2007.02.07
  • 심사 : 2008.03.06
  • 발행 : 2008.04.25

초록

A new approach for nonlinear finite element analysis of corroded reinforcements in RC structures is elaborated in the article. An algorithmic procedure for producing the tension-stiffening curve of RC elements taking into consideration most of effective parameters, e.g.: the rate of steel bar corrosion, bond-slip behavior, concrete cover and amount of reinforcement, is illustrated. This has been established on both experimental and analytical bases. This algorithm is implemented into a nonlinear finite element analysis program. The abilities of the resulted program have been studied by modeling some experimental specimens showing a reasonable agreement between the analytical and experimental findings.

키워드

참고문헌

  1. Amleh, L. and Mirza, M. S. (1999), "Corrosion influence on bond between steel and concrete", ACI Struct. J., 96(3), 415-423.
  2. Choi, C. K. and Cheung, S. H. (1996), "Tension stiffening model for planar reinforced concrete members", Comput. Struct., 59, 179-190. https://doi.org/10.1016/0045-7949(95)00146-8
  3. Coronelli, D. and Gambarova, P. (2004), "Structural assessment of corroded reinforced concrete beams: Modeling Guidelines", J. Struct. Eng., ASCE, 130(8), 1214-1224. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1214)
  4. Dekoster, M., Buyle-Bodin, F., Maurel, O. and Delmas, Y. (2003), "Modeling of the flexural behavior of RC beams subjected to localized and uniform corrosion", Eng. Struct., 25, 1333-1341. https://doi.org/10.1016/S0141-0296(03)00108-1
  5. Ghalehnovi, M. (2004), "Characteristic relations in nonlinear finite element analysis with considering corrosion and bond-slip", PhD thesis, Iran University of Science and Technology, Tehran, Iran (In Persian).
  6. Gupta, A. K. and Maestrini, S. R. (1990), "Tension stiffness model for cracked reinforced concrete", J. Struct. Eng. ASCE, 116(3), 769-790. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:3(769)
  7. Kupfer, H. B., Hildsdorf, H. K. and Ruch, H. (1969), "Behavior of concrete under biaxial stresses" ACI J., 66(8), 656-66.
  8. Lee, H. S., Noguchi T. and Tomosawa F. (2000), "Analytical evaluation of structural performance of reinforced concrete beams considering degree of reinforcing bar corrosion", Proceedings of Fourth International Conference on Repair, Rehabilitation and Maintenance of Concrete Structures and Innovations in design and Construction, Seoul, Korea, SP 193-46, 779-789.
  9. Lundgren, K. (1999), "Three dimensional modeling of bond in reinforcement concrete, theoretical model, experiment and applications", PhD thesis, Department of Structural Engineering, Chalmers University of Technology, Gotenberg, Sweden.
  10. Lundgren, K. (2001), "Bond between corroded reinforcement and concrete", Report No.00:3, Department of Structural Engineering, Chalmers University of Technology, Gotenberg, Sweden.
  11. Okamura, H. and Kim, I. H. (2000), "Seismic performance check and size effect FEM analysis of reinforced concrete", Eng. Fracture Mech, 65, 369-389. https://doi.org/10.1016/S0013-7944(99)00122-8
  12. Rizkalla, S. H. and Hwang, L. S. (1984), "Crack prediction for members in uniaxial tension", ACI J., 81, 572-579.
  13. Shayanfar, M. A. (1995), "Nonlinear finite element analysis of normal and high strength concrete structures", PhD thesis, McGill University, Montreal, Canada.
  14. Shayanfar, M. A., Kheyroddin, A. and Mirza, M. S. (1997), "Element size effects in nonlinear analysis of reinforced concrete members", Comput. Struct., 62(2), 339-352. https://doi.org/10.1016/S0045-7949(96)00007-7
  15. Somayaji, S. and Shah, S. P. (1981), "Bond stress versus slip relationships and cracking response of tension members", ACI J., 78, 217-225.
  16. Thorenfeldt, E., Tamaszemicz, A. and Jenson, J. J. (1987), "Mechanical properties of high strength concrete and application in design", Proceedings of International Symposium on Utilization of High Strength Concrete, Stanvanger, Norway, 149-159.
  17. Wollrab, E., Kulkarni, S. M., Ouyang, C. and Shah, S. P. (1996), "Response of reinforced concrete panels under uniaxial tension", ACI Struct. J., 93(6), 648-657.

피인용 문헌

  1. Effect of longitudinal rebar corrosion on the compressive strength reduction of concrete in reinforced concrete structure vol.19, pp.6, 2016, https://doi.org/10.1177/1369433216630367
  2. A tension stiffening model for analysis of RC flexural members under service load vol.17, pp.1, 2016, https://doi.org/10.12989/cac.2016.17.1.029
  3. Nonlinear finite element analysis of torsional R/C hybrid deep T-beam with opening vol.11, pp.5, 2013, https://doi.org/10.12989/cac.2013.11.5.399
  4. Force transfer mechanism in positive moment continuity details for prestressed concrete girder bridges vol.14, pp.2, 2014, https://doi.org/10.12989/cac.2014.14.2.109
  5. Hypoelastic modeling of reinforced concrete walls vol.5, pp.3, 2008, https://doi.org/10.12989/cac.2008.5.3.195
  6. Damage Evolution of RC Beams Under Simultaneous Reinforcement Corrosion and Sustained Load vol.12, pp.4, 2019, https://doi.org/10.3390/ma12040627
  7. A State-of-the-Art Review of Bending and Shear Behaviors of Corrosion-Damaged Reinforced Concrete Beams pp.0889-3241, 2019, https://doi.org/10.14359/51706919
  8. Finite-Element Analysis of Cantilever Slab Deflections with ANSYS SOLID65 3D Reinforced-Concrete Element with Cracking and Crushing Capabilities vol.24, pp.1, 2008, https://doi.org/10.1061/(asce)sc.1943-5576.0000411
  9. Seismic performance of low-rise reinforced concrete moment frames under carbonation corrosion vol.20, pp.2, 2008, https://doi.org/10.12989/eas.2021.20.2.215