DOI QR코드

DOI QR Code

Finite element analysis of shear-deficient RC beams strengthened with CFRP strips/sheets

  • Lee, H.K. (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology) ;
  • Ha, S.K. (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology) ;
  • Afzal, M. (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology)
  • 투고 : 2007.09.22
  • 심사 : 2008.08.18
  • 발행 : 2008.09.30

초록

Performance of shear-deficient reinforced concrete (RC) beams strengthened with carbon fiber-reinforced polymer (CFRP) strips/sheets is analyzed through numerical simulations on four-point bending tests. The numerical simulations are carried out using the finite element (FE) program ABAQUS. A micromechanics-based constitutive model (Liang et al. 2006) is implemented into the FE program ABAQUS to model CFRP strips/sheets. The predicted results are compared with experiment data (Khalifa and Nanni 2002) to assess the accuracy of the proposed FE analysis approach. A series of numerical tests are conducted to investigate the influence of stirrup lay-ups on the shear strengthening performance of the CFRP strips/sheets, to illustrate the influence of the damage parameters on the microcrack density evolution in concrete, and to investigate the shear and flexural strengthening performance of CFRP strips/ sheets. It has been shown that the proposed FE analysis approach is suitable for the performance prediction of RC beams strengthened with CFRP strips/sheets.

키워드

참고문헌

  1. ABAQUS Example Problems Manual, Version 6.5, Hibbitt, Karlsson & Sorensen, Inc., Pawtucket, RI, 2004.
  2. ACI Committee 318 : Building code requirements for structural concrete (ACI 348-5) and commentary (ACI 318R-95), pp.369, 1995.
  3. Arduini, M., Tommaso, A.D. and Nanni, A. (1997), "Brittle failure in FRP plate and sheet bonded beams", ACI Struct. J., 94, 363-371.
  4. Chajes, M.J., Thomson, T.A., Januszka, T.F. and Fin, W. (1994), "Flexural strengthening of concrete beams using externally bonded composite materials", Constr. Building Mater., 8, 191-201. https://doi.org/10.1016/S0950-0618(09)90034-4
  5. Cheng, Z.Q. and Batra, R.C. (1999), "Exact eshelby tensor for a dynamic circular cylindrical inclusion", J. Appl. Mech., 66, 563-565. https://doi.org/10.1115/1.2791087
  6. Ghosh, K. and Karbhari, V.M. (2007), "Evaluation of strengthening trough laboratory testing of FRP rehabilitated bridge decks after in-service loading", Comp. Struct., 77, 206-222. https://doi.org/10.1016/j.compstruct.2005.07.014
  7. Herakovich, C.T. (1998), Mechanics of Fibrous Composites, John Wiley and Sons, New York.
  8. Jayaprakash, J., Sarnad, A.A.A. and Abbasovictf, A.A. (2007), "Repair of precracked RC rectangular shear beams using CFRP strip technique", Struct. Eng. Mech., 26, 427-439. https://doi.org/10.12989/sem.2007.26.4.427
  9. Jones, J.X., Heymsfield, E. and Durham, S.A. (2004), "Fiber-reinforced polymer shear strengthening of shortspan, precast channel beams in bridge superstructures", Transportation Research Record: Journal of Transportation Research Board, No. 1892, 56-65. https://doi.org/10.3141/1892-07
  10. Jones, R., Swamy, R.N., Bloxham, J. and Bouderbalah, A. (1980), "Composite behavior of concrete beams with epoxy bonded external reinforcement", Int. J. Cement Comp., 2, 91-107.
  11. Ju, J.W. and Chen, T.M. (1994a), "Micromechanics and effective moduli of elastic composites containing randomly dispersed ellipsoidal inhomogeneities", Acta Mech., 103, 103-121. https://doi.org/10.1007/BF01180221
  12. Ju, J.W. and Chen, T.M. (1994b), "Effective elastic moduli of two-phase composites containing randomly dispersed spherical inhomogeneities", Acta Mech., 103, 123-144. https://doi.org/10.1007/BF01180222
  13. Ju, J.W. and Lee, H.K. (2000), "A micromechanical damage model for effective ealstoplastic behavior of ductile matrix composites considering evolutionary complete particle debonding", Comput. Meth. Appl. M., 183, 201- 222. https://doi.org/10.1016/S0045-7825(99)00219-4
  14. Karihaloo, B.L. and Fu, D. (1989), "A damage-based constitutive law for plain concrete in tension", Euro. J. Mech., A-Solids, 8, 373-384.
  15. Karihaloo, B.L. and Fu, D. (1990), "Orthotropic damage model for plain concrete in tension", ACI Mater. J., 87, 62-67.
  16. Khalifa, A. and Nanni, A. (2002), "Rehabilitation of rectangular simply supported RC beams with shear deficiencies using CFRP composites", Constr. Building Mater., 16, 135-146. https://doi.org/10.1016/S0950-0618(02)00002-8
  17. Khalifa, A., De Lorenzis, L. and Nanni, A. (2000), "FRP composites for shear strengthening of RC beams", Proc. 3rd Inter. Conf. on Advanced Composite Materials in Bridges and Structures, Ottawa, Canada, 137-144, August 15-18.
  18. Lee, H.K. and Liang, Z. (2004), "Computational modeling of the response and damage behavior of fiberreinforced cellular concrete", Comput. Struct., 82(7-8), 581-592. https://doi.org/10.1016/j.compstruc.2004.01.001
  19. Lee, H.K., Kim, B.R. and Ha, S.K. (2007), "Numerical evaluation of shear strengthening performance of FRP sheets/strips and sprayed epoxy coating repair systems", Composites Part B: Engineering, under review.
  20. Leung, H.Y. (2002), "Strengthening of RC beams: Some experimental findings", Struct. Survey, 20, 173-181. https://doi.org/10.1108/02630800210456823
  21. Liang, Z., Lee, H.K. and Suaris, W. (2006), "Micromechanics-based constitutive modeling for unidirectional laminated composites", Int. J. Solids Struct., 43, 5674-5689. https://doi.org/10.1016/j.ijsolstr.2005.08.020
  22. Niu, H., Vasquez, A. and Karbhari, V.M. (2006), "Effect of materials configuration on strengthening of concrete slabs by CFRP composites", Comp. Part B., 37, 213-226. https://doi.org/10.1016/j.compositesb.2005.05.015
  23. Norris, T., Saadatmanesh, H. and Mohammad, R.E. (1997), "Shear and flexural strengthening of R/C beams with carbon fiber sheets", J. Struct. Eng., ASCE, 123, 903-911. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:7(903)
  24. Oehlers, D.J., Nguyen, N.T. and Bradford, M.A. (2000), "Retrofitting by adhesive bonding steel plates to the sides of RC beams. Part 2: Debonding of plates due to shear and design rules", Struct. Eng. Mech., 9, 505-518. https://doi.org/10.12989/sem.2000.9.5.505
  25. Origin software, downloded from www.originlab.com
  26. Saadatmanesh, H. and Ehsani, M.R. (1991), "RC beams strengthened with GFRP plates: An experimental study", J. Struct. Eng., 117, 3417-3433. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:11(3417)
  27. Wenwei, W. and Guo, L. (2006), "Experimental study and analysis of RC beams strengthened with CFRP laminates under sustaining load", Int. J. Solids Struct., 43, 1372-1387. https://doi.org/10.1016/j.ijsolstr.2005.03.076
  28. Zhao, Y.H. and Weng, G.J. (1996), "Plasticity of a two-phase composite with partially debonded inclusion", Int. J. Plasticity, 12, 781-804. https://doi.org/10.1016/S0749-6419(96)00029-0
  29. Zhao, Y.H. and Weng, G.J. (1997), "Transversely isotropic moduli of two partially debonded composites", Int. J. Solids Struct., 34, 493-507. https://doi.org/10.1016/S0020-7683(96)00027-3

피인용 문헌

  1. Performance of shear wall with external reinforcement by CFRP and steel sheets against blast load vol.18, pp.5, 2016, https://doi.org/10.21595/jve.2016.16558
  2. Finite element analysis of strengthened RC beams in shear with aluminum plates vol.147, 2015, https://doi.org/10.1016/j.compstruc.2014.10.009
  3. Shear strengthening of reinforced concrete beams by means of vertical prestressed reinforcement vol.12, pp.3, 2016, https://doi.org/10.1080/15732479.2015.1019893
  4. Embedded Connector in Severe Optimization of Steel Plate for Shear Strengthening of RC Beam: Experimental and Numerical Investigations vol.2018, pp.1687-8094, 2018, https://doi.org/10.1155/2018/4721431