Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Nonlinear model of reinforced concrete frames retrofitted by in-filled HPFRCC walls

  • Cho, Chang-Geun (Hanwha Research Institute of Technology) ;
  • Ha, Gee-Joo (Department of Architectural Engineering, Kyungil University) ;
  • Kim, Yun-Yong (Department of Civil Engineering, Chungnam National University)
  • Received : 2007.08.31
  • Accepted : 2007.11.29
  • Published : 2008.09.30
⟨ Previous Next ⟩

Abstract

A number of studies have suggested that the use of high ductile and high shear materials, such as Engineered Cementitious Composites (ECC) and High Performance Fiber Reinforced Cementitious Composites (HPFRCC), significantly enhances the shear capacity of structural elements, even with/without shear reinforcements. The present study emphasizes the development of a nonlinear model of shear behaviour of a HPFRCC panel for application to the seismic retrofit of reinforced concrete buildings. To model the shear behaviour of HPFRCC panels, the original Modified Compression Field Theory (MCFT) for conventional reinforced concrete panels has been newly revised for reinforced HPFRCC panels, and is referred to here as the HPFRCC-MCFT model. A series of experiments was conducted to assess the shear behaviour of HPFRCC panels subjected to pure shear, and the proposed shear model has been verified through an experiment involving panel elements under pure shear. The proposed shear model of a HPFRCC panel has been applied to the prediction of seismic retrofitted reinforced concrete buildings with in-filled HPFRCC panels. In retrofitted structures, the in-filled HPFRCC element is regarded as a shear spring element of a low-rise shear wall ignoring the flexural response, and reinforced concrete elements for beam or beam-column member are modelled by a finite plastic hinge zone model. An experimental study of reinforced concrete frames with in-filled HPFRCC panels was also carried out and the analysis model was verified with correlation studies of experimental results.

Keywords

References

  1. Cho, C.G. and Hotta, H. (2002), "A study on compressive strength of concrete in flexural regions of reinforced concrete beams using finite element analysis", Struct. Eng. Mech., 13(3), 313-328. https://doi.org/10.12989/sem.2002.13.3.313
  2. Cho, C.G. and Kwon, M. (2004), "Development and modeling of a frictional wall damper and its applications in reinforced concrete frame structures", Earthq. Eng. Struct. Dyn., 33, 821-838. https://doi.org/10.1002/eqe.379
  3. Fukuyama, H. and Suwada, H. (2003), "Basic test on compressive properties of high performance fiber reinforced cementitious composites (Part 2 Biaxial Loading Test)", Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, September, IV, 421-422.
  4. Hakuto, S., Ozawa, J., Watanabe, K. and Nakamura, H. (2001), "Test on structural walls using fiber reinforced cement composite", Summaries of Technical Papers of Annual Meeting of AIJ, C-2, 53-54, September. (in Japanese)
  5. Hisabe, N., Yoshitake, I., Tanaka, H. and Hamada, S. (2005), "Mechanical behavior of fiber reinforced concrete element subjected to pure shearing stress", Int. Workshop on High Performance Fiber Reinforced Cementitious Composites in Structural Applications, May, 1-7.
  6. Kim, J.K., Kim, J.S., Ha, G.J. and Kim, Y.Y. (2007), "Tensile and fiber dispersion performance of ECC (Engineered Cementitious Composite) produced with slag particles", Cement Concrete Res., 37(7), 1096-1105. https://doi.org/10.1016/j.cemconres.2007.04.006
  7. Kim, Y.Y., Fischer, G. and Li, V.C. (2004), "Performance of bridge deck link slabs designed with ductile Engineered Cementitious Composite (ECC)", ACI Struct. J., 101(6), 792-801.
  8. Kim, Y.Y., Kim, J.S., Ha, G.J. and Kim, J.K. (2005), "Influence of ECC ductility on the diagonal tension behavior (Shear Capacity) of infill panels", Int. Workshop on High Performance Fiber Reinforced Cementitious Composites in Structural Applications, May, 1-7.
  9. Li, V.C. (1992), "Post-crack scaling relations for fiber reinforced cementitious composites", J. Mater. Civil Eng., ASCE, 4(1), 41-57. https://doi.org/10.1061/(ASCE)0899-1561(1992)4:1(41)
  10. Li., V.C. (1993), "From micromechanics to structural engineering - the design of cementitious composites for civil engineering applications", J. Struct. Mech. Earthq. Eng., JSCE, 10(2), 37-48.
  11. Mander, J.B. (1984), "Seismic design of bridge piers", Ph.D Dissertation, Department of Civil Engineering, University of Canterbury, New Zealand.
  12. Mikame, A., Fukuyama, H., Suwada, G. and Satoh, Y. (1998), "Study on ductile cement composite for structural elements (Part III Shear test of structural walls)", Summaries of Technical Papers of Annual Meeting of AIJ, C-2, 935-936, September. (in Japanese)
  13. Montoya, E., Vecchio, F.J. and Sheikh, S.A. (2001), "Compression field modeling of confined concrete", Struct. Eng. Mech., 12(3), 231-248. https://doi.org/10.12989/sem.2001.12.3.231
  14. Nagai, S., Kanda, T., Maruta, M. and Miyashita, T. (2002), "Shear capacity of ductile wall with high performance fiber reinforced cement composite", Proceedings of the 1st fib Congress, 767-774.
  15. Roufaiel, M.S. and Meyer, C. (1987), "Analytical modeling of hysteretic behavior of RC frames", J. Struct. Eng., ASCE, 113(9), 429-444. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:3(429)
  16. Vecchio, F.J. and Collins, M.P. (1986), "The modified compression-field theory for reinforced concrete elements subjected to shear", ACI J., March-April, 219-231.
  17. Vecchio, F.J. and Emara, M.B. (1992), "Shear deformations in reinforced concrete frames", ACI J., January- February, 46-56.
  18. Walraven, J.C. (1981), "Fundamental analysis of aggregate interlock", Proceedings, ASCE, 107, ST11, 2245-2270.

Cited by

  1. Flexural Behavior of Extruded DFRCC Panel and Reinforced Concrete Composite Slab vol.2012, 2012, https://doi.org/10.1155/2012/460541
  2. Experiments and failure analysis of SHCC and reinforced concrete composite slabs vol.56, 2015, https://doi.org/10.1016/j.engfailanal.2015.01.009
  3. Experimental study of torsional strength of RC beams constructed with HPFRC composite mortar vol.91, 2015, https://doi.org/10.1016/j.conbuildmat.2015.05.018
  4. Nonlinear Lattice-Based Model for Cyclic Analysis of Reinforced Normal and High-Strength Concrete Columns vol.18, pp.7, 2015, https://doi.org/10.1260/1369-4332.18.7.1017
  5. Analysis Model of Extruded ECC Panel RC Composite Slabs vol.12, pp.1, 2012, https://doi.org/10.9712/KASS.2012.12.1.051
  6. Experiments and performances of strain-hardening fiber low cementitious composites vol.7, pp.6, 2015, https://doi.org/10.1177/1687814015585420
  7. Basic Mixing and Mechanical Tests on High Ductile Fiber Reinforced Cementless Composites vol.24, pp.2, 2012, https://doi.org/10.4334/JKCI.2012.24.2.121
  8. Cyclic responses of reinforced concrete composite columns strengthened in the plastic hinge region by HPFRC mortar vol.94, pp.7, 2012, https://doi.org/10.1016/j.compstruct.2012.01.025
  9. Flexural performance of reinforced concrete beams strengthened with strain-hardening cementitious composite and high strength reinforcing steel bar vol.56, 2014, https://doi.org/10.1016/j.compositesb.2013.08.069
  10. Seismic Performance Evaluation of Reinforced Concrete Columns by Applying Steel Fiber-Reinforced Mortar at Plastic Hinge Region vol.24, pp.3, 2012, https://doi.org/10.4334/JKCI.2012.24.3.241
  11. Nonlinear Analysis of FRP Strengthened Reinforced Concrete Columns by Force-Based Finite Element Model vol.25, pp.5, 2013, https://doi.org/10.4334/JKCI.2013.25.5.529
  12. Increasing the flexural capacity of RC beams using partially HPFRCC layers vol.16, pp.4, 2015, https://doi.org/10.12989/cac.2015.16.4.545
  13. Flexural behavior of high-strength concrete beams reinforced with a strain hardening cement-based composite layer vol.125, 2016, https://doi.org/10.1016/j.conbuildmat.2016.08.132
  14. Performance Experiments of SHCC and High Tensile Reinforced Composite Concrete Slabs vol.17, pp.4, 2017, https://doi.org/10.9712/KASS.2017.17.4.043
  15. Manufactures and mechanics of high ductile fiber-reinforced cementless composites vol.10, pp.4, 2018, https://doi.org/10.1177/1687814018771760
  16. Experimental Study on Seismic Capacity of Reinforced Concrete Composite Columns Based on a High-ductile Fiber Cementitious Composite vol.13, pp.1, 2019, https://doi.org/10.1186/s40069-018-0324-x
  17. 철근콘크리트 보-기둥 접합부의 비선형 전단거동예측 vol.13, pp.2, 2008, https://doi.org/10.5000/eesk.2009.13.2.029
  18. Normalised rotation capacity for deformability evaluation of high-performance concrete beams vol.1, pp.3, 2008, https://doi.org/10.12989/eas.2010.1.3.269
  19. Minimum deformability design of high-strength concrete beams in non-seismic regions vol.8, pp.4, 2008, https://doi.org/10.12989/cac.2011.8.4.445
  20. Strengthening of deficient RC frames with high strength concrete panels: an experimental study vol.37, pp.2, 2008, https://doi.org/10.12989/sem.2011.37.2.177
  21. Seismic-improved reinforced-concrete composite column using a high-ductile fiber cementitious composite precast box vol.18, pp.2, 2008, https://doi.org/10.1080/13467581.2019.1603108
  22. Experimental and analytical investigation of the shear behavior of strain hardening cementitious composites vol.72, pp.1, 2008, https://doi.org/10.12989/sem.2019.72.1.019
  23. Analysis of behavior of bare and in-filled RC frames subjected to quasi static loading vol.73, pp.4, 2008, https://doi.org/10.12989/sem.2020.73.4.381
  24. Seismic performance of RC frame structures strengthened by HPFRCC walls vol.75, pp.3, 2008, https://doi.org/10.12989/sem.2020.75.3.389
  25. Numerical Study of RC Beam-Column Joints Using a 4-Node Lattice Element Analysis Method vol.25, pp.3, 2008, https://doi.org/10.1007/s12205-021-0991-z
  26. Structural Performance and Reinforcement Improvement of Structural Walls Using Strain-Hardening Cementitious Composites vol.13, pp.7, 2008, https://doi.org/10.3390/su13073607
  27. Inelastic Responses and Finite Element Predictions of Fiber Cementitious Composite and Concrete Columns vol.14, pp.9, 2008, https://doi.org/10.3390/ma14092180