DOI QR코드

DOI QR Code

Finite element analysis of vehicle-bridge interaction by an iterative method

  • Jo, Ji-Seong (POSCO E&C Technical Research Institute) ;
  • Jung, Hyung-Jo (Department of Civil and Environmental Engineering, KAIST) ;
  • Kim, Hongjin (School of Architecture & Civil Engineering, Kyungpook National University)
  • 투고 : 2007.08.30
  • 심사 : 2007.12.14
  • 발행 : 2008.09.30

초록

In this paper, a new iterative method for solving vehicle-bridge interaction problems is proposed. Iterative methods have advantages over the non-iterative methods in that it is not necessary to update the system matrix for a given wheel location, and the method can be applied for a new type of car or bridge with few or no modifications. In the proposed method, the necessity of system matrices update is eliminated using the equivalent interaction force acting on the bridge, which is obtained iteratively. Ballast stiffness is included in the interaction forces and the geometric compatibility at the contact points are used as convergence criteria. The bridge is considered as an elastic Bernoulli-Euler beam with surface irregularity and ballast stiffness. The moving vehicle is modeled as a multi-axle mass-spring-damper system having many degrees of freedom depending on the number of axles. The pitching effect, which is the interaction effect between the rear and front wheels when a vehicle begins to enter or leave the bridge, is also considered in the formulation including extended ground boundaries having surface irregularity and ballast stiffness. The applicability of the proposed method is illustrated in the numerical studies.

키워드

참고문헌

  1. Au, F.T.K., Cheng, Y.S. and Cheng, Y.K. (2001), "Vibration analysis of bridges under moving vehicles and trains: An overview", Prog. Struct. Eng. Mater., 3, 299-304. https://doi.org/10.1002/pse.89
  2. Chatterjee, P.K., Datta, T.K. and Surana, C.S. (1994), "Vibration of suspension bridge under vehicular movement", J. Struct. Eng., ASCE, 120(3), 681-703. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:3(681)
  3. Ichikawa, M., Miyakawa, Y. and Matsuda, A. (2000), "Vibration analysis of the continuous beam subjected to a moving mass", J. Sound Vib., 230(3), 493-506. https://doi.org/10.1006/jsvi.1999.2625
  4. Kwasniewski, L., Li, H., Wekezer, J.W. and Malachowski, J. (2005), "Finite element analysis of vehicle - bridge interaction using LS-DYNA", Twelfth International Congress on Sound and Vibration, Paper No. 255: 203.
  5. Kwasniewski, L., Li, H., Wekezer, J.W. and Malachowski, J. (2006), "Finite element analysis of vehicle-bridge interaction", J. Finite Elem. Anal. Des., 42(11), 950-959. https://doi.org/10.1016/j.finel.2006.01.014
  6. Kwasniewski, L., Wekezer, J.W., Roufa, G., Li, H., Ducher, J. and Malachowski, J. (2006), "Experimental evaluation of dynamic effects for a selected highway bridge", J. Performance of Constructed Facilities, ASCE, 20(3), 1-8. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:1(1)
  7. Li, H., Kwaniewski, L., Maachowski, J., Wekezer, J.W. and Ducher, J. (2005), "Evaluation of dynamic impact factor for a florida highway bridge by experiment and finite element method", 82-nd Transportation Research Board Annual Meeting, Washington, DC., Paper # 05-0871.
  8. Lou, P. (2005), "A vehicle-track-bridge interaction element considering vehicle's pitching effect", Finite Elem. Anal. Des., 41, 397-427. https://doi.org/10.1016/j.finel.2004.07.004
  9. Rohman, M.A. and Duaij, J.A. (1996), "Dynamic response of hinged-hinged single span bridge with uneven deck", Comput. Struct., 59(2), 291-299. https://doi.org/10.1016/0045-7949(95)00262-6
  10. Smith, J.W. (1988), Vibration of Structures, Chapam and Hall.
  11. Yang, F. and Fonder, G.A. (1996), "An iterative solution method for dynamic response of bridge-vehicle systems", Earthq. Eng. Struct. D., 25, 195-215. https://doi.org/10.1002/(SICI)1096-9845(199602)25:2<195::AID-EQE547>3.0.CO;2-R
  12. Yang, Y.B. and Wu, Y.S. (2001), "A versatile element for analyzing vehicle-bridge interaction response", Eng. Struct., 23, 452-469. https://doi.org/10.1016/S0141-0296(00)00065-1
  13. Yang, Y.B. and Yau, J.D. (1997), "Vehicle-bridge interaction element for dynamic analysis", J. Struct. Eng., ASCE, 123(11), 1512-1518. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:11(1512)

피인용 문헌

  1. Effects of traffic characteristics on pavement responses at the road intersection vol.47, pp.4, 2013, https://doi.org/10.12989/sem.2013.47.4.531
  2. The Seismic Response of High-Speed Railway Bridges Subjected to Near-Fault Forward Directivity Ground Motions Using a Vehicle-Track-Bridge Element vol.2014, 2014, https://doi.org/10.1155/2014/985602
  3. Dynamic analysis of coupled vehicle–bridge system based on inter-system iteration method vol.114-115, 2013, https://doi.org/10.1016/j.compstruc.2012.10.007
  4. Near-fault directivity pulse-like ground motion effect on high-speed railway bridge vol.21, pp.6, 2014, https://doi.org/10.1007/s11771-014-2196-9
  5. Evaluation of vehicle-track-bridge interacted system for the continuous CRTS-II non-ballast track slab vol.57, pp.10, 2014, https://doi.org/10.1007/s11431-014-5637-7
  6. A Versatile 3D Vehicle-Track-Bridge Element for Dynamic Analysis of the Railway Bridges under Moving Train Loads pp.1793-6764, 2019, https://doi.org/10.1142/S0219455419500500
  7. Simulation of vibrations of Ting Kau Bridge due to vehicular loading from measurements vol.40, pp.4, 2011, https://doi.org/10.12989/sem.2011.40.4.471
  8. Seismic response of a highway bridge in case of vehicle-bridge dynamic interaction vol.18, pp.1, 2008, https://doi.org/10.12989/eas.2020.18.1.001