DOI QR코드

DOI QR Code

Estimation of active multiple tuned mass dampers for asymmetric structures

  • Li, Chunxiang (Department of Civil Engineering, Shanghai University) ;
  • Xiong, Xueyu (College of Civil Engineering, Tongji University)
  • 투고 : 2007.08.29
  • 심사 : 2008.04.01
  • 발행 : 2008.07.30

초록

This paper proposes the application of active multiple tuned mass dampers (AMTMD) for translational and torsional response control of a simplified two-degree-of-freedom (2DOF) structure, able to represent the dynamic characteristics of general asymmetric structures, under the ground acceleration. This 2DOF structure is a generalized 2DOF system of an asymmetric structure with predominant translational and torsional responses under earthquake excitations using the mode reduced-order method. Depending on the ratio of the torsional to the translational eigenfrequency, i.e. the torsional to translational frequency ratio (TTFR), of asymmetric structures, the following three cases can be distinguished: (1) torsionally flexible structures (TTFR < 1.0), (2) torsionally intermediate stiff structures (TTFR = 1.0), and (3) torsionally stiff structures (TTFR > 1.0). The even distribution of the AMTMD within the whole width and half width of the asymmetric structure, thus leading to three cases of installing the AMTMD (referred to as the AMTMD of case 1, AMTMD of case 2, AMTMD of case 3, respectively), is taken into account. In the present study, the criterion for searching the optimum parameters of the AMTMD is defined as the minimization of the minimum values of the maximum translational and torsional displacement dynamic magnification factors (DMF) of an asymmetric structure with the AMTMD. The criterion used for assessing the effectiveness of the AMTMD is selected as the ratio of the minimization of the minimum values of the maximum translational and torsional displacement DMF of the asymmetric structure with the AMTMD to the maximum translational and torsional displacement DMF of the asymmetric structure without the AMTMD. By resorting to these two criteria, a careful examination of the effects of the normalized eccentricity ratio (NER) on the effectiveness and robustness of the AMTMD are carried out in the mitigation of both the translational and torsional responses of the asymmetric structure. Likewise, the effectiveness of a single ATMD with the optimum positions is presented and compared with that of the AMTMD.

키워드

참고문헌

  1. Abe, M. and Fujino, Y. (1994), 'Dynamic characterization of multiple tuned mass dampers and some design formulas', Earthq. Eng. Struct. D., 23, 813-835 https://doi.org/10.1002/eqe.4290230802
  2. Abe, M. and Igusa, T. (1995), 'Tuned mass dampers for structures with closely spaced natural frequencies', Earthq. Eng. Struct. D., 24, 247-261 https://doi.org/10.1002/eqe.4290240209
  3. Ahlawat, A.S. and Ramaswamy, A. (2003), 'Multiobjective optimal absorber system for torsionally coupled seismically excited structures', Eng. Struct., 25(7), 941-950 https://doi.org/10.1016/S0141-0296(03)00038-5
  4. Ankireddi, S. and Yang, H.T.Y. (1996), 'Simple ATMD control methodology for tall buildings subject to wind loads', J. Struct. Eng., ASCE, 122(1), 83-91 https://doi.org/10.1061/(ASCE)0733-9445(1996)122:1(83)
  5. Arfiadi, Y. and Hadi, M.N.S. (2000), 'Passive and active control of three-dimensional buildings', Earthq. Eng. Struct. D., 29(3), 377-396 https://doi.org/10.1002/(SICI)1096-9845(200003)29:3<377::AID-EQE911>3.0.CO;2-C
  6. Chang, C.C. and Yang, H.T.Y. (1995), 'Control of buildings using active tuned mass dampers', J. Eng. Mech., ASCE, 121(3), 355-366 https://doi.org/10.1061/(ASCE)0733-9399(1995)121:3(355)
  7. Chang, J.C.H. and Soong, T.T. (1980), 'Structural control using active tuned mass damper', J. Eng. Mech., ASCE, 106(6), 1091-1098
  8. Chunxiang, Li. (2000), 'Performance of multiple tuned mass dampers for attenuating undesirable oscillations of structures under the ground acceleration', Earthq. Eng. Struct. D., 29, 1405-1421 https://doi.org/10.1002/1096-9845(200009)29:9<1405::AID-EQE976>3.0.CO;2-4
  9. Jangid, R.S. (1999), 'Optimum multiple tuned mass dampers for base-excited undamped system', Earthq. Eng. Struct. D., 28, 1041-1049 https://doi.org/10.1002/(SICI)1096-9845(199909)28:9<1041::AID-EQE853>3.0.CO;2-E
  10. Jangid, R.S. and Datta, T.K. (1997), 'Performance of multiple tuned mass dampers for torsionally coupled system', Earthq. Eng. Struct. D., 26, 307-317 https://doi.org/10.1002/(SICI)1096-9845(199703)26:3<307::AID-EQE639>3.0.CO;2-8
  11. Kareem, A. and Kline, S. (1995), 'Performance of multiple mass dampers under random loading', J. Struct. Eng., ASCE, 121, 348-361 https://doi.org/10.1061/(ASCE)0733-9445(1995)121:2(348)
  12. Li, C. and Liu, Y. (2002), Active multiple tuned mass dampers for structures under the ground acceleration', Earthq. Eng. Struct. D., 31(5), 1041-1052 https://doi.org/10.1002/eqe.136
  13. Li, C. and Qu, W. (2006), 'Optimum properties of multiple tuned mass dampers for reduction of translational and torsional response of structures subject to ground acceleration', Eng. Struct., 28, 472-494 https://doi.org/10.1016/j.engstruct.2005.09.003
  14. Li, C., Wang, C. and Zhang, L. (2007), 'Simulations of earthquake-resistant asymmetric buildings with active multiple tuned mass dampers based on Simulink', Chinese J. Vib. Shock, 26(9), 45-50
  15. Lin, C.C., Ueng, J.M. and Huang, T.C. (1999), 'Seismic response reduction of irregular buildings using passive tuned mass dampers', Eng. Struct., 21, 513-524
  16. Lin, Y.Y., Cheng, C.M. and Lee, C.H. (2000), 'A tuned mass damper for suppressing the coupled flexural and torsional buffeting response of long-span bridges', Eng. Struct., 22, 1195-1204 https://doi.org/10.1016/S0141-0296(99)00049-8
  17. Pansare, A.P. and Jangid, R.S. (2003), 'Tuned mass dampers for torsionally coupled systems', Wind Struct., 6(1), 23-40 https://doi.org/10.12989/was.2003.6.1.023
  18. Singh, M.P., Singh, S. and Moreschi, L.M. (2002), 'Tuned mass dampers for response control of torsional buildings', Earthq. Eng. Struct. D., 31(4), 749-769 https://doi.org/10.1002/eqe.119
  19. Wang, J.F. and Lin, C.C. (2005), 'Seismic performance of multiple tuned mass dampers for soil-irregular building interaction systems', Int. J. Solids Struct., 42(20), 5536-5554 https://doi.org/10.1016/j.ijsolstr.2005.02.042
  20. Xu, K. and Igusa, T. (1992), 'Dynamic characteristics of multiple substructures with closely spaced frequencies', Earthq. Eng. Struct. D., 21, 1059-1070 https://doi.org/10.1002/eqe.4290211203
  21. Yamaguchi, H. and Harnpornchai, N. (1993), 'Fundamental characteristics of multiple tuned mass dampers for suppressing harmonically forced oscillations', Earthq. Eng. Struct. D., 22, 51-62 https://doi.org/10.1002/eqe.4290220105
  22. Yan, N., Wang, C.M. and Balendra, T. (1999), 'Optimum damper characteristics of ATMD for buildings under wind loads', J. Struct. Eng., ASCE, 125(12), 1376-1383 https://doi.org/10.1061/(ASCE)0733-9445(1999)125:12(1376)

피인용 문헌

  1. Active multiple-tuned mass dampers for asymmetric structures considering soil-structure interaction 2009, https://doi.org/10.1002/stc.326
  2. Effectiveness of active multiple-tuned mass dampers for asymmetric structures considering soil-structure interaction effects vol.21, pp.8, 2012, https://doi.org/10.1002/tal.624
  3. Performance and parametric study of active multiple tuned mass dampers for asymmetric structures under ground acceleration vol.4, pp.3, 2009, https://doi.org/10.2140/jomms.2009.4.571
  4. Optimal design of an array of active tuned mass dampers for wind-exposed high-rise buildings vol.20, pp.6, 2013, https://doi.org/10.1002/stc.1502
  5. Minimum deformability design of high-strength concrete beams in non-seismic regions vol.8, pp.4, 2008, https://doi.org/10.12989/cac.2011.8.4.445
  6. Inelastic design of high-axially loaded concrete columns in moderate seismicity regions vol.39, pp.4, 2008, https://doi.org/10.12989/sem.2011.39.4.559
  7. Concurrent flexural strength and deformability design of high-performance concrete beams vol.40, pp.4, 2008, https://doi.org/10.12989/sem.2011.40.4.541
  8. Optimum Design of PID Controlled Active Tuned Mass Damper via Modified Harmony Search vol.10, pp.8, 2008, https://doi.org/10.3390/app10082976