DOI QR코드

DOI QR Code

Numerical simulation of relation between interface topography and residual stress in thermal barrier coatings

  • Yao, Guo-Feng (College of Mechanical Science and Engineering, Nanling Campus, Jilin University) ;
  • Ma, Hong-Mei (College of Mechanical Science and Engineering, Nanling Campus, Jilin University) ;
  • Zhang, Lin-Wen (Jilin College of Traffic Profession Technique)
  • Received : 2005.09.15
  • Accepted : 2007.02.20
  • Published : 2008.07.10

Abstract

With respect to thermal barrier coating, the analysis of interface cohesion and residual stress is important to the life of TBC from mechanical view point. Up to now, there is not a model of describing interface cohesion. In the paper, we give a simple model of computing residual stress and study the residual stress of TBC with ANSYS. The distribution of the residual stress in different interface topography and the relationship between the residual stress and the interface topography dimension are presented.

Keywords

References

  1. Ahrens, M., Vaben, R. and Stover, D. (2002), "Stress distributions in plasma-sprayed thermal barrier coatings as a function of interface roughness and scale thickness", Surface Coatings Technol., 161(1), 26-35 https://doi.org/10.1016/S0257-8972(02)00359-6
  2. Freborg, A.M., Ferguson, B.L., Brindleg, W.J. and Petrus, G.J. (1998), "Modeling oxidation induced stresses in thermal barrier coatings", Mater. Sci. Eng. A, 245, 182-190 https://doi.org/10.1016/S0921-5093(97)00849-6
  3. Hsuech, C.H. and Fuller, E.R. (2000), "Analytical modelling of oxide thickness effects on residual stresses in thermal barrier coatings", Scripta Mater., 42(8), 781-787 https://doi.org/10.1016/S1359-6462(99)00430-3
  4. Hsueh, C.H. and Fuller Edwin, R. Jr (2000), "Residual stress in thermal barrier coatings: effects of interface asperity curvature/height and oxide thickness", Mat. Sci. Eng. A: Struct. Mater.: Properties, Microstructure and Proc., 283(1-2), 46-55
  5. Hsueh, C.H., Becher, P.F., Fuller, E.R. Jr., Langer, S.A. and Carter, W.C. (1999), "Surface-roughness induced residual stress in thermal barrier coating: Computer simulations", Mater. Sci. Forum, 308-311, 442-449
  6. Kawamura, M., Okado, H. and Suzuki, K. (2004), "Effect of interface roughness on internal stress of ceramic thermal barrier coating", Proc. Int. Thermal Spray Conf., 1082-1087
  7. Ma Yue, Xi Jun and Duan Zhuping (2003), "The investigation on the residual stress and the failure mechanism in thermal barrier coatings (TBCs)", Mech. Mater. Eng. Sci. Exper., 440-443
  8. Nair, B.G., Singh, J.P. and Grimsditch, M. (2000), "Model for residual stress evolution in air-plasma-sprayed zirconia thermal barrier coatings", Ceramic Eng. Sci. Proc., 21(3), 133-141
  9. Nusair Khan, A., Lu, J. and Liao, H. (2003), "Effect of residual stresses on air plasma sprayed thermal barrier coatings", Surface Catings Technol., 168(2-3), 291-299 https://doi.org/10.1016/S0257-8972(03)00207-X
  10. Persson, B.N. and Tosatti, E. (2001), "The effect of surface roughness on the adhesion of elastic solids", J. Chem. Phys., 115(12), 5597-5610 https://doi.org/10.1063/1.1398300
  11. Sfar, K., Aktaa, J. and Munz, D. (2002), "Numerical investigation of residual stress fields and crack behavior in TBC systems", Mater. Sci. Eng. A, 333(1-2), 351-360 https://doi.org/10.1016/S0921-5093(01)01859-7
  12. Taylor, R.E. (1998), "Thermal conductivity determinations of thermal barrier coatings", Mater. Sci. Eng. A., 245, 160-167 https://doi.org/10.1016/S0921-5093(97)00847-2
  13. Wang Hong, Zhang Kun and Chen Guang-nan (2001), "Numerical simulation of interfacial residual stresses in thermal barrier coatings induced by interface topography", Heat Treat. Met., 26(9), 44-46