DOI QR코드

DOI QR Code

Impact of uncertain natural vibration period on quantile of seismic demand

  • Hong, H.P. (Dept. of Civil and Environmental Engineering, University of Western Ontario) ;
  • Wang, S.S. (Dept. of Civil and Environmental Engineering, University of Western Ontario) ;
  • Kwan, A.K.H. (Dept. of Civil Engineering, University of Hong Kong)
  • 투고 : 2005.06.08
  • 심사 : 2007.12.05
  • 발행 : 2008.03.10

초록

This study investigates effect of uncertainty in natural vibration period on the seismic demand. It is shown that since this uncertainty affects the acceleration and displacement responses differently, two ratios, one relating peak acceleration responses and the other relating the peak displacement responses, are not equal and both must be employed in evaluating and defining the critical seismic demand. The evaluation of the ratios is carried out using more than 200 strong ground motion records. The results suggest that the uncertainty in the natural vibration period impacts significantly the statistics of the ratios relating the peak responses. By using the statistics of the ratios, a procedure and sets of empirical equations are developed for estimating the probability consistent seismic demand for both linear and nonlinear systems.

키워드

참고문헌

  1. ACT (1996), Seismic Evaluation and Retrofit of Concrete Buildings, Rep ATC-40, Applied Technology Council, Redwood City, Calif.
  2. Adams, J., Weichert, D.H. and Halchuk, S. (1999), "Trial Seismic Hazard Maps of Canada - 1999: 2%/50 Year Values for Selected Canadian Cities", Geological Survey of Canada Open File 3724, Natural Resources Canada, Ottawa.
  3. Benjamin, J. and Cornell, C.A. (1970), Probability, Statistics, and Decision for Civil Engineers, McGraw-Hill, New York.
  4. Chopra, A.K. (2000), Dynamics of Structures, Prentice Hall, New Jersey.
  5. Cornell, C.A. (1968), "Engineering seismic risk analysis", B. Seismol. Soc. Am., 58(5), 1583-1606.
  6. Davenport, A.G and Hill-Carroll, P. (1986), "Damping in tall buildings: its variability and treatment in design", in Building Motion in Wind (eds. Isyumov, N. and Tschanz, T.), ASCE.
  7. Frankel, A., Mueller, C., Barnhard, T., Perkins, D., Leyendecker, EX, Dickman, N., Hanson, S. and Hopper, M. (1996), National Seismic Hazard Maps, U.S. Department of the Interior U.S. Geological Survey, Open File 96-532, Denver, CO.
  8. Freeman, S.A., Nicoletti, J.P and Tyrrell, J.V (1975), Evalaution of Existing Buildings for Seismic Risk - A Case study of Puget Sound Naval Shipyard, Bremerton, Washington, Proc., 1St US National Conference on Earthquake Engineering, pp. 113-122.
  9. Halchuk, S. (2002), Personal Communication.
  10. Haviland, R. (1976), "Evaluation of seismic safety of buildings", Thesis Supervised by Biggs, J.M. and Vanmarcke, E.H., Massachusetts Institute of Technology.
  11. Hong, H.P and Jiang, J. (2004), "Ratio between peak inelastic and elastic responses with uncertain structural properties", Can. J Civil Eng., 31(4), 703-711. https://doi.org/10.1139/l04-048
  12. Krawinkler, H. and Nassar, A.A. (1992), "Seismic based design on ductility and cumulative damage demands and capacities", Nonlinear Seismic Analysis and Design of Reinforced Concrete Buildings (eds. Fajfar P. and Krawinkler, H.), Elsevier Science, New York.
  13. McGuire, R.K. (1974), "Seismic structural response risk analysis, incorporating peak response regressions on earthquake magnitude and distance", Ph.D. Thesis Supervised by C.A. Cornell, Report R74-51, Structures publication No. 399. Department of Civil Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts.
  14. Miranda, E. (2000), "Inelastic displacement ratios for structural on firm sites", J. Struct. Eng., ASCE, 126(10), 1150-1159. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:10(1150)
  15. Newmark, N.M. and Rosenblueth, E. (1971), Fundamentals of Earthquake Engineering, Englewood Cliffs, Prentice-Hall, N.J.
  16. Riddell, R., Garcia, J.E. and Garces, E. (2002), "Inelastic deformation response of SDOF systems subjected to earthquakes", Earthq. Eng. Struct. D., 31, 515-538. https://doi.org/10.1002/eqe.142
  17. Silva, W. (2001), PEER Strong Motion Database, Pacific Engineering, (http://nisee.berkeley.edu/software_and_ data/strong motion/index.html).
  18. Sobel, P. (1994), Revised Livermore Seismic Hazard Estimates for Sixty-nine Nuclear Power Plant Sites East of the Rocky Mountains, Division of Engineering, Office of Nuclear Reactor Regulation, N JREG-1488, Washington. DC.
  19. Veletsos, A.S. and Newmark, N.M. (1960), "Effect of inelastic behavior on the response of simple systems to earthquake motions", Proc., 2nd World Conf on Earthq. Eng., 2, 895-912.
  20. Vidic, T., Fajfar, P and Fischinger, M. (1994), "Consistent inelastic design spectra: strength and displacement", Earthq. Eng. Struct. D., 23(5), 507-521. https://doi.org/10.1002/eqe.4290230504
  21. Wang, S.S. and Hong, H.P. (2005), "Probabilistic analysis of peak response to non-stationary seismic excitation", Struct. Eng. Mech., 20(5), 527-542. https://doi.org/10.12989/sem.2005.20.5.527
  22. WGC (1995), Probabilistic Seismic Hazard Assessment, Gentilley 2, Report to Atomic Energy Control Board of Canada, Weston Geophysical Corporation, 280 Slater Street, Ottawa, Ontario.

피인용 문헌

  1. Concurrent flexural strength and deformability design of high-performance concrete beams vol.40, pp.4, 2008, https://doi.org/10.12989/sem.2011.40.4.541