Effects of Curing Agent on the Corrosion Protection of Diglycidyl Ether Bisphenol-A Based Epoxy Coating

  • Shon, MinYoung (Coating and Corrosion Research Department, Samsung Heavy Industries) ;
  • Kwon, HyukSang (Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology)
  • Published : 2008.12.01

Abstract

Epoxy coatings were prepared to give a different corrosion protection by reacting it with two different kinds of curing agent, and then effects of the curing agents on the structure, surface hydrophobic tendency, water transport behavior and hence corrosion protection of epoxy coatings were examined using hygrothermal cyclic test, and impedance analysis. In the results of EIS, the corrosion protection of epoxy coating cured by polyamide shows better than epoxy coating cured by polyamide epoxy adduct. It was well agreed with its water transport behavior and hydrophobic tendency.

Keywords

References

  1. C. A. May, Epoxy Resins; Chemistry and Technology, Marcel Dekker, New York, 1988
  2. T. M. Goulding, Epoxy Resin Adhesives, in: Handbook of Adhesive Technology, A. Pizzi, K. L. Mittal, Eds., p. 531, Marcel Dekker, New York, 1994
  3. M. T. Aronhime and J. K. Gillham, Journal of Applied Polymer Science, 32, 3589 (1986) https://doi.org/10.1002/app.1986.070320218
  4. J. M. Zhou and J. P. Lucas, Polymer, 40, 5505 (1999) https://doi.org/10.1016/S0032-3861(98)00790-3
  5. L. Nunez, M. Villanueva, F. Fraga, and M. R. Nunez, Journal of Applied Polymer Science, 74, 353 (1999) https://doi.org/10.1002/(SICI)1097-4628(19991010)74:2<353::AID-APP17>3.0.CO;2-J
  6. G. Z. Xiao and M. E. R. Shanahan, Journal of Applied Polymer Science, 65, 449 (1997) https://doi.org/10.1002/(SICI)1097-4628(19970718)65:3<449::AID-APP4>3.0.CO;2-H
  7. R. A. Lezzi, Fluoroploymer coatings for architectural applications in modern fluoropolymers, John Wiley & Sons, 1997
  8. S. Y. Zhang, X. W Luo, S. J. Li, W. F. Zhou, Huaxue Tongbao, Chemistry, 31, 31 (1997)
  9. F. Deflorian, L. Fedrizzi, P. L. Borona, Electrochemical. Acta., 38, 1609 (1993) https://doi.org/10.1016/0013-4686(93)85048-4
  10. R. D. Amstrong, J. D. Wright, and T. M. Handyside, J. Appl. Eelectochem., 22, 795 (1992) https://doi.org/10.1007/BF01023720
  11. F. Mansfeld, J. Appl. Eelectochem., 25, 187 (1995)
  12. E. P. M. van Westing, G. M. Ferrari, J. H. W. de Wit, Corrosion Science, 36, 957 (1994) https://doi.org/10.1016/0010-938X(94)90197-X
  13. X. W. Luo, Z. Y. Yun, S. J. Li, W. F. Zhou, Macromol, Rapid commun, 16, 941 (1995) https://doi.org/10.1002/marc.1995.030161210
  14. S. Y. Zhang, Y. F. Ding. S. J. Li, X. W. Luo, W. F. Zhou. Corrosion Science, 44, 861 (2002) https://doi.org/10.1016/S0010-938X(01)00091-9
  15. R. J. Good, L. A. Girifalco, J. Phys. Chem, 64, 561 (1960) https://doi.org/10.1021/j100834a012
  16. S. A. Lindqvist, Corrosion, 41, 69 (1985) https://doi.org/10.5006/1.3581974
  17. F. Bellucci and L. Nicodemo, Corrosion, 67, 235 (1993)
  18. T. Nquyen, D. Bentz, and E. Byrd, J. Coating Technology, 67, 37 (1995)
  19. S. J. Shaw, D. A. Tod, J. R. Griffith, L. H. Lee, Adhesive, Sealants and Coating for Space and Harsh Environment, Plenum Press, New York, 1988
  20. J. Crank, The Mathematics of Diffusion, Clarendon press, Oxford, 1956
  21. Zofia Kolek, Progress in Organic Coatings, 30, 287 (1997) https://doi.org/10.1016/S0300-9440(97)00006-4
  22. Gordon P. Bierwagen, L. He, J. Li, L. Ellingson, D.E. Tallman, Progress in Organic Coatings, 39, 67 (2000) https://doi.org/10.1016/S0300-9440(00)00106-5
  23. L. Valentinelli, J. Vogelsang, H. Ochs, L. Fedrizzi, Progress in Organic Coatings, 45, 405 (2002) https://doi.org/10.1016/S0300-9440(02)00137-6
  24. L. Fedrizzi, A. Bergo, F. Deflorian, L. Valentinelli, Progress in Organic Coatings, 48, 271 (2003) https://doi.org/10.1016/S0300-9440(03)00109-7
  25. S. Touzain, Q. Le Thu, G. Bonnet, Progress in Organic Coatings, 52, 311 (2005) https://doi.org/10.1016/j.porgcoat.2004.09.007
  26. L. Fedrizzi, A. Bergo, and M. Fanicchia, Electrochimica Acta, 51, 1864 (2006) https://doi.org/10.1016/j.electacta.2005.02.146