배기열 회수용 종이 열교환기의 성능예측에 관한 연구

A Study on the Performance Prediction of Paper Heat Exchanger for Exhaust Heat Recovery

  • 유성연 (충남대학교 BK21메카트로닉스사업단) ;
  • 김진혁 (충남대학교 BK21메카트로닉스사업단) ;
  • 정민호 (충남대학교 BK21메카트로닉스사업단) ;
  • 지명석 (아주자동차대학 자동차계열)
  • 발행 : 2008.06.10

초록

In order to control indoor air quality and save energy, it is needed to install a suitable ventilation system equipped with heat exchanger for heat recovery. Paper heat exchanger can recover $50{\sim}70%$ of the enthalpy difference between supply and exhaust air. The purpose of this research is to obtain the experimental correlations for the friction factor, heat transfer coefficient, mass transfer coefficient and permeance of paper heat exchanger, which can be used to predict the performance of the paper heat exchanger. Pressure drops at various velocities, and sensible and latent heat transfer rates at various dry-bulb temperatures, relative humidities and specific humidities are measured to derive experimental correlations. The results of prediction using correlations show fairly good agreement with the experimental data obtained in the actual operating conditions.

키워드

참고문헌

  1. Chung, M. H. and Yoo, S. Y., 2005, A Study on the Factors Affecting the Performance of Paper Heat Exchanger for Exhaust Heat Recovery, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 17, No. 10, pp. 956-964
  2. Zhang, L. Z. and Niu, J. L., 2002, Effectiveness Correlations for Heat and Moisture Transfer Processes in an Enthalpy Exchanger With Membrane Cores, Journal of Heat Transfer, Vol. 124, pp. 922-929 https://doi.org/10.1115/1.1469524
  3. Kim, N. H., Cho, J. P., Han, S. P. and Choi, J. H., 2006, Performance Analysis and Testing ofa Cross-Flow Aluminum Heat Exchanger for Kitchen Ventilation, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 18, No. 3, pp. 193-201
  4. Gwak, K. M., Bae, C. H. and Kim, J. Y., 2007, A Study on Improvement of Performance for Perforated Type Total HEX Element, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 19, No. 7, pp. 529-536
  5. Cengel, Y. A., 2003, Heat Transfer, 2nd Ed., McGraw-Hill, pp. 683-684
  6. Kline, S. J. and McClintock, F. A., 1953, Describing Uncertainties in Single-sample Experiments, Mechanical Engineering, pp. 3-8
  7. Marreo, T. R. and Mason, E. A., 1972, Gaseous Diffusion Coefficients, Journal of Phys. Chem., p. 3118
  8. Kim, J. H., 2006, A Study on the Design and Performance Prediction of Plastic and Paper Plate Heat Exchanger for Ventilation System, MS thesis, Chungnam National University, Daejeon, Korea