한국공작기계학회논문집 (Transactions of the Korean Society of Machine Tool Engineers)

한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

적층각도변화에 따른 CFRP & 혼성 모자형 구조부재의 굽힘 특성

Bending Characteristic of CFRP & Hybrid Shaped Hat Structure Member According to Stacking Orientation Angle

  • 김지훈 (조선대학교 기계설계공학과) ;
  • 김정호 (조선대 대학원 첨단부품소재공학과) ;
  • 차천식 (동강대학 소방안전관리과) ;
  • 양인영 (조선대 기계설계공학과)
  • 발행 : 2008.06.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, CFRP(Carbon Fiber Reinforced Plastics) that has high specific strength and elastic modulus and low thermal strain was used as a material for the lightweight structural member. CFRP is a fiber material as anisotropic material. The anisotropic material is characterized by the change of its mechanical properties according to stacking orientation angle. CFRP orientation angle was oriented in [A/B]s in order to examine the effect of CFRP orientation angle on the characteristics of energy absorption. CFRP is very weak to the impact from the outside. So, when impact is applied to CFRP, its strength is rapidly lowered. The hybrid material was manufactured by combining CFRP to aluminum which is lightweight and widely used for structural members of the automobile. The hybrid member was shaped as a side member that could support the automobile engine and mount and absorb a large amount of impact energy at the front-end in case of automobile collision. The bending test device was manufactured in accordance with ASTM standard, and mounted to UTM for bending test. For comparing bending characteristics of the hybrid member with those of Aluminum and CFRP member, tests were performed for aluminum, CFRP and hybrid member, respectively.

키워드

참고문헌

  1. Kim J. H., Yang I. Y., and Sim J. K., 2003, "Evaluation of Fracture Toughness of Dynamic Interlaminar for CFRP Laminate Plates by Resin Content," KSMTE, Vol. 12, No. 4, pp. 43-49
  2. Im K. H., Park N. S., Ra S. W., Kim Y. N., Lee H., Sim J. K., and Yang I. Y., 2001, "Characteristics of Low Velocity Impact Responses due to Interface Number and Stacking Sequences of CFRP Composite Plates," KSMTE, Vol. 10, No. 6, pp. 48-56
  3. Kim Y. N., Im K. H., Park J. W., and Yang I. Y., 2000, "Experimental approach on the collapse mechanism of CFRP composite tube," Reviews of progress in QNDE, pp. 369-376
  4. Lee K. S. and Yang I. Y., 2006, "Influence of stacking Conditions on the Collapse Characteristics of CFRP Side Member," KSMTE spring conference, Vol. 20, No. 5, pp. 397-402
  5. Cha C. S., Lee K. S., Kim S. H., Ching J. O., and Yang I. Y., 2005, "Axial Collapse Characteristics of Aluminum/CFRP Compound circular Tube," Key Engineering materials, Vols. 297-300, pp. 166-171 https://doi.org/10.4028/www.scientific.net/KEM.297-300.166
  6. Shin K. C., Lee J., Kim K. H., Song M. C., and Huh J. H., 2002, "Axial crush and bending collapse of an aluminum/GFRP hybrid tube and its energy absorption capability," Composite structure, Vol. 57, pp. 279-287 https://doi.org/10.1016/S0263-8223(02)00094-6
  7. Mamalis A. G., Manolakos D. E., Ioannidis M. B., and Papapostolou D.P., 2004, "Crashworthy characteristics of azially statically compressed thin-walled square CFRP composite tube: experimental," Composite structure, Vol. 63, pp. 347-360 https://doi.org/10.1016/S0263-8223(03)00183-1
  8. Robert M. J., 1992, "Crushing characteristics of comtinuous fiber-reinforced composite tubes," Journal of composite materials, Vol. 26, No. 1
  9. Lee K. S., Cha C. S., and Yang I. Y., 2005, "A Study on the Axial Crushing Behavior of Aluminum CFRP Circle Members for Light Weight," transactions of KSAE, Vol. 13, No.5, pp. 50-56
  10. Yang I. Y., Lee K. S., Kim Y. N., Chung J. O., and Cha C. S., 2006, "Axial Crushong Behavior and Energy Absorption Capability of Al/CFRP Square tubes for Light Weights," Key Engineering materials, Vols. 306-308, pp. 297-302 https://doi.org/10.4028/www.scientific.net/KEM.306-308.297
  11. ASTM, 2003, Standard Test Method for Flectural Properties of Unreinforced and Reinforced Plastics and Electrical including Materials, ASTM D6272-02:2003, American Society for Testing and Materials