초록
최근 들어 선박의 항로에 위치하고 있는 대형 해상교량의 건설이 활발해짐에 따라 선박충돌의 위험성을 고려하여 교각 주변에 충돌방지공을 설치하는 경우가 많다. 이러한 충돌방지공 설치로 인해 교각의 세굴특성은 충돌방지공 설치 전의 교각 주변의 세굴양상과 매우 다르게 나타난다. 따라서 본 연구에서는 충돌방지공의 설치 유무에 따른 세굴의 형태를 분석하기 위해 인천대교를 대상으로 수리모형실험을 실시하였다. 충돌방지공 설치 전의 고정상, 이동상실험을 통해 유황과 세굴심 및 세굴공 범위를 파악하였으며 또한 충돌방지공 설치 후 실험을 통하여 최종적으로 충돌방지공으로 인한 교각 세굴 특성 변화를 분석하였다. 실험결과, 충돌방지공이 설치됨으로 인해 최대세굴심이 W1교각의 경우 약 0.24 m, W2+3+4교각의 경우 2.4 m 증가하는 것으로 나타났다. 또한 최대세굴심의 발생위치는 W1교각의 경우 충돌방지공 설치 전 후가 동일한 위치에서 발생하였으나 W2+3+4교각의 경우 설치 후 최대세굴심이 교각주변이 아닌 충돌방지공 주변에서 발생하였다.
More recently, the massive marine bridges in a ship passage have been constructed on the sea. Therefore, the ship impact protection for the bridge-piers are installed to consider the possibility of vessel collision danger. Due to the ship impact protection, the pier-scour characteristics are changed in comparison with the condition without the ship impact protection (SIP). In this study, the physical modeling for the Incheon Sea-Crossing Bridge was performed to analyze the pier-scour characteristics with respect to the vessel collision protection. The rigid and movable bed tests were conducted to evaluate the flow pattern, scour depth, and scourhole with and without the ship impact protection. The experimental results for the maximum scour depth is increased 0.24 m in W1 pier at the same location and 2.4 m in W2+3+4 piers due to the SIP installation. Especially, the maximum scour depth in W2+3+4 piers was occurred around the SIP.