Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on Roll Forming for Precision Improvement of High Rotation Gear

고속회전용 기어의 정밀도 향상을 위한 전조가공에 관한 연구

  • 장정환 (경상대학교 기계항공공학부, K-MEM R&D Cluster) ;
  • 우에마쯔세이조 ;
  • 조성현 (경상대학교 기계항공공학부, K-MEM R&D Cluster) ;
  • 김준성 (경상대학교 기계항공공학부, K-MEM R&D Cluster) ;
  • 류성기 (경상대학교 기계항공공학부, K-MEM R&D Cluster)
  • Published : 2008.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. Ford Motor Co., "Roll Forming of Gear at Ford Motor Company," AGMA, pp. 109-119, 1968
  2. Terauchi, Y., Tabara, M. and Wakaoka, N., "A Study on Rolling Finish of Gear : 1st Report, Distribution of Plastic Deformation on Profile," Trans. JSME, Vol. 43, No. 375, pp. 4327-4336, 1977 https://doi.org/10.1299/kikai1938.43.4327
  3. Uematsu, S., "How to Occur Involute Profile Error in Finish Roll Forming of Spur Gears(1st Report)," Trans. JSPE, Vol. 54, No. 1, pp. 139-144, 1988
  4. Uematsu, S. and Kato, M., "Involute Profile Error in Finish Roll Forming of Spur Gears(2nd Report) - formation of Pressure Angle Error," Trans. JSPE, Vol. 55, No. 10, pp. 1839-1844, 1989
  5. Uematsu, S. and Kato, M., "A New Method of forced Displacement for finish roll Forming of Spur Gears (1st Report)-working Process and mechanism," Trans. JSPE, Vol. 56, No. 3, pp. 563-568, 1990
  6. Uematsu, S. and Kato, M., "A New Method of forced Displacement for finish roll Forming of Spur Gears (2nd Report) - finishing Accuracy," Trans. JSPE, Vol. 56, No. 11, pp. 2105-2110, 1990
  7. Lyu, S. K., "A Study on the Effect of Shot Peened Treatments on the Strength of Carburized Gears," J. of the Korean Society of Precision Engineering, Vol. 14, No. 9, pp. 61-67, 1997
  8. Lee, S. H., "A Study on the Precision Analysis of Gear Measurement Using CNC Gear Tester & 3D Coordinate Measuring Machine," Gyeongsang National University, pp. 1-73, 1999
  9. Lyu, S. K., "International Symposium on Technology of Machine Elements Design 2002." Research Center for Aircraft Parts Technology Gyeongsang National University, pp. 44-50, 2002
  10. Lyu, S. K., "A Study on Correction of the Gear Tooth Profile Error by Finish Roll Forming," J. of the Korean Society of Precision Engineering, Vol. 22, No. 4, pp. 159-166, 2005