DOI QR코드

DOI QR Code

지르코늄 스폰지를 원료로 사용하여 화학증착법으로 제조된 탄화지르코늄 코팅층의 물성

Properties of Chemical Vapor Deposited ZrC Coating Layer using by Zirconium Sponge Materials

  • 김준규 (연세대학교 신소재공학과) ;
  • 최유열 (연세대학교 신소재공학과) ;
  • 이영우 (한국원자력연구소 원자력수소생산사업팀) ;
  • 박지연 (한국원자력연구소 원자력수소생산사업팀) ;
  • 최두진 (연세대학교 신소재공학과)
  • Kim, Jun-Gyu (Department of Advanced Material Science and Engineering, Yonsei University) ;
  • Choi, Yoo-Youl (Department of Advanced Material Science and Engineering, Yonsei University) ;
  • Lee, Young-Woo (Nuclear Materials Technology and Development, Korea Atomic Energy Research Institute) ;
  • Park, Ji-Yeon (Nuclear Materials Technology and Development, Korea Atomic Energy Research Institute) ;
  • Choi, Doo-Jin (Department of Advanced Material Science and Engineering, Yonsei University)
  • 발행 : 2008.04.30

초록

The SiC and ZrC are critical and essential materials in TRISO coated fuel particles since they act as protective layers against diffusion of metallic and gaseous fission products and provides mechanical strength for the fuel particle. However, SiC and ZrC have critical disadvantage that SiC loses chemical integrity by thermal dissociation at high temperature and mechanical properties of ZrC are weaker than SiC. In order to complement these problems, we made new combinations of the coating layers that the ZrC layers composed of SiC. In this study, after Silicon carbide(SiC) were chemically vapor deposited on graphite substrate, Zirconium carbide(ZrC) were deposited on SiC/graphite substrate by using Zr reaction technology with Zr sponge materials. The different morphologies of sub-deposited SiC layers were correlated with microstructure, chemical composition and mechanical properties of deposited ZrC films. Relationships between deposition pressure and microstructure of deposited ZrC films were discussed. The deposited ZrC films on SiC of faceted structure with smaller grain size has better mechanical properties than deposited ZrC on another structure due to surface growth trend and microstructure of sub-deposited layer.

키워드

참고문헌

  1. H. Nickel, H. Nabielek, G. Pott, and A.W. Mehner, "Long Time Experience with the Development of HTR Fuel Elements in Germany," Nucl. Eng. Des., 217 141-51 (2002). https://doi.org/10.1016/S0029-5493(02)00128-0
  2. S. Kouadri-Mostefa, P. Serp, M. Hemati, and B. Caussat, "Silicon Chemical Vapor Deposition (CVD) on Microporous Powders in a Fluidized Bed," Powder Technol., 120 82-7 (2001). https://doi.org/10.1016/S0032-5910(01)00351-5
  3. Gregory K. Miller, David A. Petti, Dominic J. Varacalle Jr., and John T. Maki, "Statistical Approach and Benchmarking for Modeling of Multi-dimensional Behavior in TRISO-coated Fuel Particles," J. Nucl. Mater., 317 69-82 (2003). https://doi.org/10.1016/S0022-3115(02)01702-6
  4. C. M. Hollabaugh, R. D. Reiswig, P. Wagner, L. A. Wahman, and R. W. White, "A New Method for Coating Microspheres with Zirconium Carbide and Zirconium Carbidecarbon Graded Coats," J. Nucl. Mater., 37 325-32 (1975).
  5. K. Minato, K. Fukuda, H. Seiko, A. Ishikawa, and E. Oeda, "Deterioration of ZrC-coated Fuel Particle Caused by Failure of Pyrolytic Carbonlayer," J. Nucl. Mater., 253 13-21 (1998).
  6. J. G. Kim, E-Sul Kum, D. J. Choi, S. S. Kim, H. L. Lee, Y. W. Lee, and J. Y. Park, "A Study on the CVD Deposition for SiC-TRISO Coated Fuel Material Fabrication," J. Kor. Ceram. Soc., 44 [3] 167-74 (2007). https://doi.org/10.4191/KCERS.2007.44.3.169
  7. K. Ikawa and K. Iwamoto, "Coating Microspheres with Zirconium Carbide," J. Nucl. Mater., 45 67-8 (1972). https://doi.org/10.1016/0022-3115(72)90115-8
  8. K. Ikawa and K. Iwamoto, "Coating Microspheres with Zirconium Carbide-carbonalloy," J. Nucl. Mater., 52 128-30 (1974). https://doi.org/10.1016/0022-3115(74)90036-1
  9. H. S. Kim and D. J. Choi, "Effect of Diluent Gases on Growth Behavior and Characteristics of Chemically Vapor Deposited Silicon Carbide films," J. Am. Ceram. Soc., 82 [2] 331-37 (1999). https://doi.org/10.1111/j.1551-2916.1999.tb20066.x
  10. D. J. Kim and D. J. Choi, "Microhardness and Surface Roughness of Silicon Carbide by Chemical Vapour Deposition," J. Mater. Sci. Lett., 16 256-59 (1997).
  11. J. Valli, "A Review of Adhesion Test Methods for Thin Hard Coating," J. Vac. Sci. Technol A, 4 [6] 3007-14 (1986). https://doi.org/10.1116/1.573616
  12. Dayong Cheng, Shaoqing Wang, and Hengqiang Ye, "First- Principles Calculations of the Elastic Properties of ZrC and ZrN," J. Alloy.Com., 377 221-24 (2004). https://doi.org/10.1016/j.jallcom.2004.01.058
  13. S. Motojima, H. yagi, and N. Iwamori, "Chemical Vapor Deposirion of SiC and Some of Its Properties," J. Mater. Sci. Lett., 5 13-5 (1986). https://doi.org/10.1007/BF01671419

피인용 문헌

  1. Estimation of the Light Intensity by Using Bright-Chip LED Sensory System vol.62, pp.9, 2013, https://doi.org/10.5370/KIEE.2013.62.9.1290