DOI QR코드

DOI QR Code

Fabrication of SiC Fiber-SiC Matrix Composites by Reaction Sintering

  • Lim, Kwang-Young (Department of Materials Science and Engineering, University of Seoul) ;
  • Kim, Young-Wook (Department of Materials Science and Engineering, University of Seoul) ;
  • Park, Ji-Yeon (Division of Nuclear Materials Technology Development, Korea Atomic Energy Research Institute)
  • Published : 2008.04.30

Abstract

This paper presents a new process for producing SiC fiber-SiC matrix(SiC/SiC) composites by reaction sintering. The processing strategy for the fabrication of the SiC/SiC composites involves the following: (1) infiltration of the SiC fiber fabric using a slurry consisting of Si and C precursors, (2) stacking the slurry-infiltrated SiC fiber fabric at room temperature, (3) cross-linking the stacked composites, (4) pyrolysis of the stacked composites, and (5) hot-pressing of the pyrolyzed composites. It was possible to obtain dense SiC/SiC composites with relative densities of >96% and a typical flexural strength of ${\sim}400$ MPa.

Keywords

References

  1. H. Ohnabe, S. Masaki, M. Onozuka, K. Miyahara, and T. Sasa, "Potential Application of Ceramic Matrix Composites to Aero-Engine Components," Comp. Part A, 30 [4] 489-96 (1999). https://doi.org/10.1016/S1359-835X(98)00139-0
  2. X. Luan, L. Cheng, Y. Xu, and L. Zhang, "Stressed Oxidation Behaviors of SiC Matrix Composites in Combustion Environments," Mater. Lett., 61 [19-20] 4114-16 (2007). https://doi.org/10.1016/j.matlet.2007.01.038
  3. R. Naslain, "Design, Preparation and Properties of Non- Oxide CMCs for Application in Engines and Nuclear Reactors: An Overview," Comp. Sci. Tech., 64 [2] 155-70 (2004). https://doi.org/10.1016/S0266-3538(03)00230-6
  4. W. Yang, T. Noda, H. Araki, Y. Jinnan, and A. Kohyama, "Mechanical Properties of Several Advanced Tyranno-SA Fiber Reinforced CVI-SiC Matrix Composites," Mater. Sci. Eng. A, 345 [1-2] 28-35 (2003). https://doi.org/10.1016/S0921-5093(02)00468-9
  5. J. Y. Park, H. S. Hwang, W. J. Kim, J. I. Kim, J. H. Son, B. J. Oh, and D. J. Choi, "Fabrication and Characterization of $SiC_f$/SiC Composite by CVI using the Whiskering Process," J. Nuclear Mater., 307-311 [2] 1227-31 (2002). https://doi.org/10.1016/S0022-3115(02)00958-3
  6. D. Jaglim, J. Binner, B. Vaidhyanathan, C. Prentice, B. Shatwell, and D. Grant, "Microwave Heated Chemical Vapor Infiltration: Densification Mechanism of $SiC_f$/SiC Composites," J. Am. Ceram. Soc., 89 [9] 2710-17 (2006).
  7. A. Kohyama, M. Kotani, Y. Katoh, T. Nakayasu, M. Sato, T. Yamamura, and K. Okamura, "High-Performance SiC/ SiC Composites by Improved PIP Processing with New Precursor Polymers," J. Nuclear Mater., 283-287, 565-69 (2000). https://doi.org/10.1016/S0022-3115(00)00270-1
  8. M. Kotani, T. Inoue, A. Kohyama , Y. Katoh, and K. Okamura, "Effect of SiC Particle Dispersion on Microstructure and Mechanical Properties of Polymer-Derived SiC/SiC Composite," Mater. Sci. Eng. A, 357 [1-2] 376-85 (2003). https://doi.org/10.1016/S0921-5093(03)00206-5
  9. Y. Katoh, S. M. Dong, and A. Kohyama, "Thermo-Mechanical Properties and Microstructure of Silicon Carbide Composites Fabricated by Nano-Infiltrated Transient Eutectoid Process," Fusion Eng. Design, 61-62, 723-31 (2002). https://doi.org/10.1016/S0920-3796(02)00180-1
  10. S. Dong, Y. Katoh, and A. Kohyama, "Preparation of SiC/ SiC Composites by Hot Pressing, using Tyranno-SA fiber as Reinforcement," J. Am. Ceram. Soc., 86 [1] 26-32 (2003). https://doi.org/10.1111/j.1151-2916.2003.tb03272.x
  11. M. S. Kim, Y.-W. Kim, K. S. Han, and J. H. Park, "Nicalon- Fiber-Reinforced SiC Composites via Infiltration(in Korean)," J. Kor. Ceram. Soc., 30 [12] 993-98 (1993).
  12. Y.-W. Kim, J. G. Lee, M. S. Kim, and J. H. Park, "Effect of Multilayer Coating on Mechanical Properties of Nicalon- Fiber-Reinforced Silicon Carbide Composites," J. Mater. Sci., 31 335-38 (1996). https://doi.org/10.1007/BF01139148
  13. Y.-W. Kim, Y. S. Chun, J. Y. Park, W. S. Ryu, and D. S. Park, "Process for Dense 2D SiC Fiber-SiC Matrix Composites," Met. Mater. Int., 13 [3] 197-200 (2007). https://doi.org/10.1007/BF03027804
  14. K. Y. Lim, D. H. Jang, Y.-W. Kim, J. Y. Park, and D. S. Park, "Effect of Processing Parameters on the Densification and Strength of 2D SiC Fiber-SiC Matrix Composites Fabricated by Slurry Infiltration and Stacking Process," J. Kor. Ceram. Soc., 44 [7] 349-53 (2007). https://doi.org/10.4191/KCERS.2007.44.7.349
  15. J. H. Eom, D. H. Jang, Y.-W. Kim, I. H. Song, and H. D. Kim, "Low Temperature Processing of Porous Silicon Carbide Ceramics by Carbothermal Reduction(in Korean)," J. Kor. Ceram. Soc., 43 [9] 552-57 (2006). https://doi.org/10.4191/KCERS.2006.43.9.552
  16. Y.-W. Kim, S. H. Kim, I. H. Song, H. D. Kim, and C. B. Park, "Fabrication of Open-Cell, Microcellular Silicon Carbide Ceramics by Carbothermal Reduction," J. Am. Ceram. Soc., 88 [10] 2949-51 (2005). https://doi.org/10.1111/j.1551-2916.2005.00509.x
  17. S. M. Lee, T. W. Kim, H. J. Lim, C. Kim, Y.-W. Kim, and K. S. Lee, "Mechanical Properties and Contact Damages of Nanostructured Silicon Carbide Ceramics," J. Ceram. Soc. Jpn., 115 [5] 304-09 (2007). https://doi.org/10.2109/jcersj.115.304
  18. Y.-W. Kim, M. Mitomo, and H. Hirotsuru, "Grain Growth and Fracture Toughness of Fine-Grained Silicon Carbide Ceramics," J. Am. Ceram. Soc., 78 [11] 3145-48 (1995). https://doi.org/10.1111/j.1151-2916.1995.tb09100.x
  19. Y.-W. Kim, Y. S. Chun, T. Nishimura, M. Mitomo, and Y. H. Lee, "High-Temperature Strength of Silicon Carbide Ceramics Sintered with Rare-Earth Oxide and Aluminum Nitride," Acta Mater., 55 [2] 727-36 (2007). https://doi.org/10.1016/j.actamat.2006.08.059