References
- S. Gupta, A. Ray and E. Keller, 'Online fatigue damage monitoring by ultrasonic measurements: A symbolic dynamics approach,' Inter. J. Fatigue, Vol. 29, No. 6, pp. 1100-1114, (2007) https://doi.org/10.1016/j.ijfatigue.2006.09.011
- S. H. Tang, J. W. Hao and H. L. Pan, "Material microstructure effects on ultrasonic waves under simple shear and pure shear," NDT & E International, Vol. 40, No. 6, pp. 486-495, (2007) https://doi.org/10.1016/j.ndteint.2007.01.009
- 김정석, 권숙인, 박익근, '페라이트기 9Cr 내열강의 크리프-피로손상에 따른 미세조직 및 초음파 비파괴평가", 한국재료학회지, Vol. 17, No. 8, pp. 425-432, (2007) https://doi.org/10.3740/MRSK.2007.17.8.425
- A. Mitra, J. N. Mohapatra, J. Swaminathan, M. Ghosh, A. K. Panda and R. N. Ghosh, 'Magnetic evaluation of creep in modified 9Cr-1Mo steel,' Scripta Mater., Vol. 57, No. 9, pp. 813-816, (2007) https://doi.org/10.1016/j.scriptamat.2007.07.004
- 김정석, 권숙인, 박익근, "크리프-피로 손상된 페라이트기 9Cr 내열강의 미세조직 발달과 자기적 특성', 비파괴검사학회지, Vol. 27, No. 5, pp. 374-382, (2007)
- C. S. Kim and S. I. Kwun, 'Influence of Precipitate and Martensite Lath on the Magnetic Properties in Creep Damaged 11Cr-3.45W Steel,' Mater. Trans., Vol. 48, No. 11, pp. 3028-3030, (2007) https://doi.org/10.2320/matertrans.MEP2007176
- B. Sun and Y. Guo, 'High-cycle fatigue damage measurement based on electrical resistance change considering variable electrical resistivity and uneven damage,' Inter. J. Fatigue, Vol. 26, No. 5, pp. 457-462, (2004) https://doi.org/10.1016/j.ijfatigue.2003.10.004
- 변재원, 권숙인, '전기비저항을 이용한 2.25Cr-1Mo 강의 열화도 평가 - 미세조직적 접근', 비파괴검사학회지, Vol. 22, No. 1, pp. 65-73, (2002)
- 남승훈, 유광민, 류제천, "전기비저항을 이용한 금속합금 열화도 평가기술", 비파괴검사학회지, Vol. 21, No. 5, pp. 532-541, (2001)
- N. Gope, A. Chatterjee, T. Mukherjee and D. S. Sarma, 'Influence of long-term aging and superimposed creep stress on the microstructure of 2.25Cr-1Mo Steel,' Metall. Trans., Vol. 24A, No. 2, pp. 315-326, (1993)
- 박은수, 박익근, 김정석, 김현묵, 권숙인, 변재원 '2.25Cr-1Mo강 인공열화재의 초음파 특성에 관한 연구', 비파괴검사학회지, Vol. 21, No. 4 pp. 439-445, (2001)
- C. S. Kim, S. I. Kwun, B. Y. Ann, S. S. Lee and S. H. Nham, 'Microstructural character- ization of creep damaged 11Cr-3.5W-3Co Steel,' Sol. State Pheno., Vol. 118, pp. 475-478, (2006) https://doi.org/10.4028/www.scientific.net/SSP.118.475
- J. E. Lee, Y. C. Kim, J. P. Ahn and H. S. Kim, 'Enhanced plasticity in a bulk amorphous matrix composite: macroscopic and microscopic viewpoint studies,' Acta Mater., Vol. 53, No. 1, pp. 129-139, (2005) https://doi.org/10.1016/j.actamat.2004.09.010
- I. Tkalcec, C. Azcoїtia, S. Crevoiserat and D. Mari, 'Tempering effects on a martensitic high carbon steel,' Mater. Sci. Eng., A387-389, pp. 352-356, (2004)
- R. Truell, C. Elbaum and B. B. Chick, Ultrasonic Methods in Solid State Physics, Academic Press, New York, pp. 159-179, (1969)
- S. Takahashi, J. Echigoya and Z. Motoki, 'Magnetization curves of plastically deformed Fe metals and alloys,' J. Appl. Phys., Vol. 87, No. 2, pp. 805-813, (2000) https://doi.org/10.1063/1.371945
- J. Degauque, B. Astie, J. L. Porteseil and R. Vergne, 'Influence of the grain size on the magnetic and magnetomechanical properties of high-purity iron,' J. Magn. Magn. Mater., Vol. 26, No. 1-3, pp. 261-263, (1982) https://doi.org/10.1016/0304-8853(82)90166-4