참고문헌
- Baines, N.C., Wallace, F.J. and Whitfield, A., 1979, “Computer Aided Design of Mixed Flow Turbines for Turbochargers,”Transaction ASME, Vol. 101, pp. 440-449.
- Abidat, M., Chen, H., Baines, N.C., 1992, “Design of a Highly Loaded Mixed Flow Turbine,” Proceedings Instn. Of Mech.Engrs., Vol. 206.
- Arcoumanis, C., Hakeem, I., Khezzar, L. and Martinez-Botas, R.F., 1995, “Performance of a Mixed Flow TurbochargerTurbine Under Pulsating Flow Conditions,” Transaction ASME, paper 95-GT-210.
- Karamanis, N., Martinez-Botas, R.F., 2002, “Mixed Flow Turbines for Automotive Turbochargers: Steady and unsteadyPerformance,” IMechE Int. J. Engine Research, Vol. 3(3), pp. 127-138. https://doi.org/10.1243/14680870260189253
- Baets, J., Bernard, O., Gamp, T., and Zehnder, M., 1998, “Design and Performance of ABB Turbocharger TPS57 withVariable Turbine Geometry,” 6th Int. Conf. on Turbochargers and Turbocharging, Proc. of the IMechE, paper C554/017/98, pp.315-325.
- Winterbone D.E., Nikpour B. and Alexander, G.I., 1990, “Measurement of the Performance of a Radial Inflow Turbine inSteady and Unsteady Flow,” Proc. IMechE, paper C405/015, pp. 153-162.
- Kosuge, H., Yamanaka, N., Ariga, I., and Watanabe, I., 1976, “Performance of radial flow turbines under pulsating flowconditions,” Trans. of the ASME, J. of Engineering for Power, Vol. 98, pp. 53-59. https://doi.org/10.1115/1.3446110
- Japikse, D. and Baines, N.C., 1994, Introduction to Turbomachinery, Concept ETI Inc., USA and Oxford University Press,Oxford.
- Hiett, G.F. and Johnston, I.H., 1963, “Experiments Concerning the Aerodynamic Performance in Inward Radial FlowTurbines,” Proc. of the IMechE, 178, Part 3I(II), pp. 28-42. https://doi.org/10.1243/PIME_PROC_1963_178_006_02
- Kirtley, K.R., Beach, T.A., Rogo,C., 1993, “Aeroloads and Secondary Flows in a Transonic Mixed Flow Turbine Stage,” Trans. of ASME, 115, pp. 590-601. https://doi.org/10.1115/1.2929294
- Szymko, S., Martinez-Botas, R.F., Pullen, K. R., McGlashan, N.R. and Chen, H., 2002, “A High-Speed, Permanent MagnetEddy-Current Dynamometer for Turbocharger Research,” 7th Int. Conf. on Turbochargers and Turbocharging, Proc. of theIMechE, paper C602-026.
- Szymko, S., Martinez-Botas, R.F. and Pullen, K.R., 2005, “Experimental Evaluation of Turbocharger Turbine Performance under Pulsating Flow Conditions,” Proc. of ASME Turbo Expo, paper GT 2005-68878. https://doi.org/10.1115/GT2005-68878
- Spence, S.W.T., O’Neill, J.W. and Cunningham, G., 2006, “An Investigation of the Flowfield Through a Variable GeometryTurbine Stator with Vane Endwall Clearance,” Proc. of the IMechE, Vol 220, Part A: J. Power and Energy, pp. 899-910. https://doi.org/10.1243/09576509JPE171
- Szymko, S., 2006, “The Development of an Eddy Current Dynamometer for Evaluation of Steady and PulsatingTurbocharger Turbine Performance,” PhD Thesis, Department of Mechanical Engineering, Imperial College London, UK.
피인용 문헌
- Modeling turbo-expander systems vol.89, pp.2, 2013, https://doi.org/10.1177/0037549712469661
- Numerical Investigation: Effect of Stator Vanes on Turbocharger Turbine Performance vol.2014, pp.1542-3034, 2014, https://doi.org/10.1155/2014/984094
- Control-oriented turbine power model for a variable-geometry turbocharger pp.2041-2991, 2017, https://doi.org/10.1177/0954407017702996
- Experimental validation of a quasi-two-dimensional radial turbine model pp.2041-3149, 2018, https://doi.org/10.1177/1468087418788502
- Effect of Variable Geometry Guide-Vane with Cylindrical Endwalls on Turbine Stage Performance vol.0, pp.0, 2018, https://doi.org/10.1515/tjj-2017-0059