Abstract
The Ilsun Bridge is the world's longest box girder bridge(801m) with corrugated steel webs and has the widest width($21.2{\sim}30.9m$: tri-cellular cross section) among these kinds of composite girder bridges. It has fourteen spans(50m, 10 at 60m, 50m, 2 at 50.5m) where twelve spans are erected by the incremental launching method and two spans by full staging method. Special topics related to the structural safety of prestressed concrete box girder bridge with corrugated steel web in construction stage and service were reviewed. Investigations focus on the span-to-depth ratio, shear stress of corrugated steel webs and optimization of tile length of steel launching nose. The span-to-depth ratio of Ilsun bridge has been found to be well-planned while the corrugated steel web has been designed highly conservative and it has been observed that the conventional nose-deck interaction equation do not fit well with corrugated steel web bridges. As a result, detailed construction stage analysis was performed to check the stress levels and the safety of preceding design conditions. Finally, from the design review of Ilsun bridge, this study suggests optimal design issues which should be of interest in designing a prestressed concrete box girder bridge with corrugated steel webs.
일선대교는 복부 파형강판 복합교랑 형식으로서 연장파 폭원으로는 세계 최대의 규모이다. 총 14개 경간으로 구성된 일선대교는 압출공법(ILM)에 의하여 12개 경간이 연속구조로 건설되고 나머지 2개 경간은 동바리공법(FSM)에 의하여 건설된다. 본 논문에서는 동일한 구조형식으로는 국내에서 최초로 건설되며 해외에서도 유례가 없는 광폭과 장경간의 복부 파형강판 복합교량인 일선대교를 압출공법에 의하여 시공하면서 수행된 구조 안전성분석과 관련된 주제들을 다루고 있다. 이러한 과정을 통하여 지간-형고비, 복부 파형강판의 전단응력, 그리고 압출추진코의 최적 길이 등이 파형강판 복합구조 교량의 시공중 및 사용중 안전성에 큰 영향을 미칠 수 있는 것으로 분석되었다. 특히, 일선대교와 같은 복부 강재구조를 갖는 복합교량은 박스거더, 추진코, 그리고 연결 격벽의 강성차가 크기 때문에 기존의 방법에 의한 단면력 분석은 적합하지 않은 것으로 확인되었다. 이에 따라 압출 추진코의 길이, 구조물의 강성 등을 변수로 압출중 최대 부모멘트에 대한 검토를 수행하였으며 최종적으로는 상세 구조해석을 통하여 구조물의 시공 중 안전성을 확인하였다.