초록
콘크리트의 일축압축실험에서 축하중이 발생함에 따라 새로운 균열이 발생하고 이 균열의 확장이 파괴의 주된 원인이 되는 경우가 대부분인데 이는 입자 결합 모델에서 입자간의 결합이 파괴되어 해석 대상체의 균열 모사와 유사하게 해석될 수 있어 콘크리트의 표준 공시체에 대하여 일축압축실험의 모사 가능성을 연구하였다. 그러나 입자 결합 모델은 해석 대상체를 입자간의 집합체로 모사하기 때문에 입자간의 결합을 결정하는 미시변수에 의해서 해석 대상의 거시물성이 변하게 되어 이들 변수간의 정량적인 관계를 파악하는 것이 중요하다. 본 연구에서 사용된 접촉 결합 모델에서는 총 8개의 미시변수가 있어 이들 변수와 일축압축실험결과 나오는 거시물성-탄성계수, 일축압축강도, 포아송비-와 콘크리트의 압축파괴거동에 관련이 있는 균열 개시 응력과 일축압축강도와의 비로서 5개의 거시물성에 대하여 부분배치법 및 회귀분석을 통하여 이들 간의 정량적인 관계를 도출하였고 그 결과 일축압축강도를 가정한 가상시료 및 조사 자료로부터 얻은 일축압축강도를 비교적 잘 모사할 수 있었다. 또한 해석을 수행한 공시체의 응력-변형률 곡선이나 응력 수준별 균열 발생의 빈도 및 파괴거동을 관찰한 결과 일반적인 콘크리트의 일축압축하중 하에서의 파괴거동과 상당부분 유사함을 보여 입자 결합 모델을 이용하여 콘크리트 공시체에 대한 일축압축실험을 잘 모사할 수 있다고 본다.
In an uniaxial compressive test of a concrete standard specimen (150$\times$300 mm) the crack initiation and extension with the stress increase are the major reason of the failure, which is similar to the breakage of the particle bonding in the simulation by using particle bonded model, especially particle flow code in 3 dimensions (PFC3D) developed by Itasca Consulting Group Inc. That is the main motive to study the possibility of an uniaxial compressive strength test simulation. It is important to investigate the relationship between the micro-parameters and the macro-properties because the 3-dimensional particle bonded model uses the spherical particles to analyze the physical phenomena. Contact bonded model used herein has eight micro-parameters and there are five macro-properties; Young's modulus, Poisson's ratio, uniaxial compressive strength and the crack initiation stress and the ratio concerning the crack propagation with the stress. To simulate the compressive test we made quantitative relationships between the micro-parameters and the macro-properties by using the fractional factorial design and various sensitivity analyses including regression analysis, which result in the good agreement with the previous studies. Also, the stress-stain curve and the crack distribution over the specimen given by PFC3D showed the mechanical behavior of the concrete standard specimen under the uniaxial compression. It is concluded that the particle bonded model can be a good tool for the analyzing the mechanical behavior of concrete under the uniaxial compressive load.