Journal of the Korea Concrete Institute (콘크리트학회논문집)

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis of Crack Width and Deflection Based on Nonlinear Bond Characteristics in Reinforced Concrete Flexural Members

비선형 부착 특성에 기반한 철근콘크리트 휨부재의 균열폭과 처짐 해석

  • Lee, Gi-Yeol (Research and Development Center, Saman Corporation) ;
  • Kim, Woo (Dept. of Civil Engineering, Chonnam National University)
  • 이기열 ((주)삼안 기술개발연구원) ;
  • 김우 (전남대학교 토목공학과)
  • Published : 2008.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes a proposal for average crack width and immediate deflection calculation in structural concrete members. The model is mathematically derived from actual bond stressslip relationships and tension stiffening effect between reinforcement and the surrounding concrete, and the actual strains of steel and concrete are integrated respectively along the embedded length between the adjacent cracks so as to obtain the difference in the axial elongation. With these, a model for average crack width and immediate deflection in reinforced concrete flexural members are proposed utilizing difference in the axial elongation and average steel strain and moment-curvature relationship with taking account of bond characteristics. The model is applied to the test specimens available in literatures, and the crack width and deflections predicted by the proposal equation in this study are closed to the experimentally measured data compared the current code provisions.

이 논문은 철근콘크리트 휨부재의 균열폭과 처짐 계산에 대한 해석적 모델을 제안한 것이다. 균열 안정화단계에서 철근과 콘크리트 경계면에서 발생하는 실제와 유사한 형태의 부착응력-미끌림 관계와 인장증강효과를 수치적으로 유도한 후, 균열과 균열 사이에서 철근의 매입길이 방향으로 발생하는 철근과 콘크리트의 변형률 차이가 균열면으로 누적되는 양을 계산할 수 있는 평형방정식을 이용하였다. 이로부터 두 재료의 변형량 차이로부터 평균 균열폭을 계산할 수 있는 모델과 인장증강효과를 반영한 철근의 평균변형률과 모멘트-곡률 관계를 도입하여 처짐을 계산하는 모델을 제안하였다. 이렇게 정식화된 새로운 균열폭 및 처짐 모델을 기존 문헌에 발표된 여러 연구자들의 실험자료에 적용하여 그 정확성을 검증한 결과, 제안식에 의한 예측값은 현재 사용되고 있는 여러 설계기준의 사용성 규정으로 계산한 결과와 비교할 때 실험값을 비교적 정확하게 예측하는 것으로 나타났다.

Keywords

References

  1. 한국콘크리트학회, 콘크리트구조설계기준, 한국콘크리트학회, 2007, pp. 340-348
  2. Fib, Structural Concrete-Volume 2, International Federation for Structural Concrete, Switzerland, 1999, pp. 75-91
  3. Fib Task Group, Bond of Reinforcement in Concrete, State-of- Art Report Bulletin 10, International Federation for Structural Concrete, Switzerland, 2000, pp. 19-33
  4. CEB-FIP, CEB-FIP Model Code 1990, Comite Euro-International Du Beton, Paris, 1991, pp. 87-109
  5. European Committee for Standardization, Eurocode 2-Design of Concrete Structures, European Committee for Standardization, Brussels, 2002, 130 pp
  6. ACI Committee 318, Building Code Requirements for Structural Concrete and Commentary (ACI 318-08), ACI, Farmington Hill MI, 2008, pp. 135-137
  7. Balazs, G., "Cracking Analysis Bases on Slip and Bond Stresses," ACI Materials Journal, Vol. 90, No. 4, 1993, pp. 340-348
  8. Beeby, A. W., "Predicting of Crack Width in Hardened Concrete," Structural Engineer, Vol. 57A, No. 1, 1979, pp. 9-17
  9. Broms B. B., "Crack Width and Crack Spacing in Reinforced Concrete Members," ACI Journal, Vol. 62, No. 9, 1965, pp. 1237-1256
  10. Chan, H. C., Cheung, Y. K., and Huang, Y. P., "Crack Analysis of Reinforced Concrete Tension Members," ASCE Journal of Structural Engineering, Vol. 118, No. 8, 1992, pp. 2118-2131 https://doi.org/10.1061/(ASCE)0733-9445(1992)118:8(2118)
  11. Gergely, P. and Lutz, L. A., "Maximum Crack Width in Reinforced Concrete Flexural Members," Causes, Mechanism, and Control of Cracking in Concrete ACI Special Publication SP- 20, ACI, Michigan, 1968, pp. 87-117
  12. Ghali, A., "Deflection of Reinforced Concrete Members ; A Critical Review," ACI Structural Journal, Vol. 90, No. 4, 1993, pp. 364-373
  13. Gilbert, R. I., "Deflection Calculation for Reinforced Concrete Structures - Why We Sometimes Get It Wrong," ACI Structural Journal, Vol. 96, No. 6, 1999, pp. 364-373
  14. Prakhya, G. K. V. and Morley, C. T., "Tension Stiffening and Moment-Curvature Relations of Reinforced Concrete Elements," ACI Structural Journal, Vol. 87, No. 5, 1990, pp. 597-605
  15. Renaud, F. and Hazem, C., "Basic Model and Simplified Calculations of Deformations According to the CEB-FIP Model Code 1990," ACI Structural Journal, Vol. 91, No. 2, 1994, pp. 169-177
  16. Shunsheng, Y. and Jiakui, C., "Bond Slip and Crack Width Calculations of Tension Members," ACI Journal, Vol. 85, No. 4, 1988, pp. 414-422
  17. 이기열, 김 우, 하태관, "비선형 부착특성에 기반한 철근 콘크리트 부재의 인장강화효과 모델," 콘크리트학회 논문집, 19권, 6호, 2007, pp. 745-754 https://doi.org/10.4334/JKCI.2007.19.6.745
  18. CEB, Serviceability Models-Behavior and Modeling in Serviceability Limit States Including Repeated and Sustained Loads, Comite Euro-International Du Beton, Lausanne, Switzerland, 1997, 12 pp
  19. Yannopoulos, P. J., "Variation of Concrete Crack Width Through the Concrete Cover to Reinforcement," Magazine of Concrete Research, Vol. 41, No. 147, 1989, pp. 63-68 https://doi.org/10.1680/macr.1989.41.147.63
  20. Bilal, S. H. and Mohamad, H. H., "Effect of Fiber Reinforcement on Bond Strength of Tension Lap Splices in High-Strength Concrete," ACI Structural Journal, Vol. 98, No. 5, 2001, pp. 638-647
  21. 강영진, 오병환, "철근콘크리트 휨부재의 균열폭 및 균열간격의 결정," 대한토목학회 논문집, 5권, 4호, 1985, pp. 103-111
  22. 고원준, 박선규, "부착특성을 고려한 철근콘크리트 부재의 휨 균열폭 산정," 대한토목학회 논문집, 22권, 4-A호, 2002, pp. 825-835
  23. Nilson, A. H., Darwin, D. and Dolan, C. W., Design of Concrete Structures, McGraw Hill, New York, NY, 2004, pp. 278-280
  24. 김 우, 이기열, 정선희, "고강도콘크리트 휨부재의 처짐에 관한 연구," 대한토목학회 논문집, 22권, 3-A호, 2002, pp. 631-640
  25. Alwis, W. A. M., "Trilinear Moment-Curvature Relationship for Reinforced Concrete Beams," ACI Structural Journal, Vol. 87, No. 3, 1990, pp. 276-283
  26. Shah, S. P. and Shrikrishna, M. K., "Response of Reinforced Concrete Beams at High Strain Rates," ACI Structural Journal, Vol. 95, No. 6, 1998, pp. 705-715
  27. Tan, K. H., Paramasivam, P., and Tan, K. C., "Instantaneous and Long-Term Deflections of Steel Fiber Reinforced Concrete Beams," ACI Structural Journal, Vol. 91, No. 4, 1994, pp. 384-393

Cited by

  1. Flexural Bond Behavior of Rebar in Ultra-High Performance Concrete Beams Considering Lap-Splice Length and Cover Depth vol.08, pp.03, 2016, https://doi.org/10.4236/eng.2016.83013
  2. Influence of Tension Stiffening Effect on Deflection and Crack Width in RC Members vol.22, pp.6, 2010, https://doi.org/10.4334/JKCI.2010.22.6.761