DOI QR코드

DOI QR Code

Chloride Penetration Resistance of Ternary Blended Concrete and Discussion for Durability

삼성분계 혼합콘크리트의 염화물 침투 저항성 및 내구성에 대한 고찰

  • Song, Ha-Won (Dept. of Civil and Environmental Engineering, Yonsei University) ;
  • Lee, Chang-Hong (Dept. of Civil and Environmental Engineering, Yonsei University) ;
  • Lee, Kewn-Chu (Dept. of Civil and Environmental Engineering, Yonsei University) ;
  • Kim, Jae-Hwan (Dept. of Civil and Environmental Engineering, Yonsei University) ;
  • Ann, Ki-Yong (Dept. of Civil and Environmental Engineering, Yonsei University)
  • 송하원 (연세대학교 사회환경시스템공학부) ;
  • 이창홍 (연세대학교 사회환경시스템공학부) ;
  • 이근주 (연세대학교 사회환경시스템공학부) ;
  • 김재환 (연세대학교 사회환경시스템공학부) ;
  • 안기용 (연세대학교 사회환경시스템공학부)
  • Published : 2008.08.31

Abstract

Mineral admixtures are used to improve the quality of concrete and to develop sustainability of concrete structures. Supplementary cementitious materials (SCM), such as silica fume (SF), granulated blast furnace slag (GGBS) and pulverized fly ash (PFA), are gradually recognized as useful mineral admixture for producing high performance concrete. The study on ternary blended concrete utilizing mainly three major mineral admixtures is limited and the study on durability and chloride induced corrosion resistance of ternary blended concrete is very few. This study examines the durability characteristics of the ternary blended concrete composed of different amount of the SCM with ordinary Portland concrete and the study experimentally focuses on corrosion resistance evaluation of ternary blended concrete subjected to chloride attack. In this study, 50% replacement ratio of mineral admixture to OPC was used, while series of combination of $20{\sim}40%$ GGBS, $5{\sim}15%$ SF and $10{\sim}45%$ PFA binder were used for chloride corrosion resistance test. This study concerned the durability properties of the ternary blended concrete including the corrosion resistance, chloride binding, chloride transport and acid neutralization capacity. It was found that the ternary blended concrete utilizing the SCM densified the pore structures to lower the rate of chloride transport. Also, increased chloride binding and buffering to acid were observed for the ternary blended concrete with chlorides in cast.

혼화재를 사용한 혼합콘크리트는 콘크리트의 품질을 개선시키며 지속가능한 콘크리트구조물의 건설에도 기여하고 있다. 실리카퓸 (SF), 고로슬래그미분말 (GGBS), 플라이애쉬 (PFA) 등의 시멘트계 결합재는 고성능콘크리트의 혼화재로서 인식이 증가되고 있으나, 삼성분계 혼합콘크리트에 대한 연구는 매우 제한적이며, 특히 염해에 의한 부식저항성 측면에서의 연구는 상당히 취약한 실정이다. 본 연구에서는 보통포틀랜드시멘트의 경우를 50%의 치환율로 고정한 후 고로슬래그미분말의 경우는 $20{\sim}40%$, 실리카퓸의 경우에는 $5{\sim}15%$, 플라이애쉬의 경우는 $10{\sim}45%$로 치환한 경우의 각종 배합에 의한 염해부식저항성에 관한 실험연구를 수행하였다. 삼성분계 혼합콘크리트의 염해부식저항성을 평가한 본 연구에서는, 수행 실험으로서 부식 저항성 실험, 염소이온 고정화 능력 실험, 급속 염화물 촉진 실험, 산중성화 저항 능력 실험 등을 수행하였다. 연구 결과로서, 삼성분계 콘크리트는 미세구조를 치밀화 하여 염소이온의 이동을 지연시키고 있음을 확인하였다. 또한, 염분을 함유한 삼성분계 혼합콘크리트 내의 염소이온 고정화 능력 및 산중성화 저항 능력이 크게 개선되고 있음을 확인하여 염해에 대한 부식 저항성이 향상됨을 알 수 있었다.

Keywords

References

  1. Song, H. W., Kim, H. J., Saraswathy, V., and Kim, T. H., "A Micro-Mechanics Based Corrosion Model for Predicting the Service Life of Reinforced Concrete Structures," Int J Electro Sci., Vol. 2, 2007, pp. 341-354
  2. Arya, C., Buenfeld, N. R., and Newman, J. B., "An Assessment of Four Methods of Determining the Free Chloride Content of Concrete," Mater Struct., Vol. 23, 1990, pp. 319-330 https://doi.org/10.1007/BF02472710
  3. Song, H. W., Ann, K. Y., Lee, C. H., and Jung, M. S., "Chloride Binding Isotherms in Cement Paste Containing Various Binders," 2006 Life Cycle Management of Coastal Concrete Structues Conference, Nagaoka, Japan, Nov. 2006, pp. 109-114
  4. Song, H. W., Lee, C. H., and Ann, K. Y., "Prediction of Chloride Profile Considering Binding of Chlorides in Cement Matrix," International Corrosion Engineering Conference, May, 2007, pp.139-143
  5. Song, H. W., Lee, C. H., Jung, M. S., and Ann, K. Y., "Development of Chloride Binding Capacity in Cement Pastes and the Influence of the pH of Hydration Products," Can Civ Eng J., In Press, 2008
  6. Song, H. W., Jung, M. S., and Ann, K. Y., "Resistance of Cementitous Binders Against a Fall in the pH at Corrosion Initiation," International Corrosion Engineering Conference, May, 2007, pp. 144-148
  7. Berke, N. S. and Hicks, M. C., "Predicting Chloride Profiles in Concrete," Corr Eng., Vol. 1, 1994, pp. 234-239
  8. Collepardi, M., Marcialis, A., and Turriziani, R., "The Kinetics of Penetration of Chloride Ions into the Concrete," II Cement, 2nd Edition, Clarendon Press, Oxford, 1975, 21 pp
  9. Song, H. W., Lee C. H. and Ann, K. Y., "Factors Influencing Chloride Transport in Concrete Structures Exposed to Marine Environment," Cem Concr Comp., Vol. 30, Issue 2, pp. 113-121 https://doi.org/10.1016/j.cemconcomp.2007.09.005
  10. Thomas, M. D. A., Matthews, J. D., and Haynes, C. A., "Chloride Diffusion and Reinforcement Corrosion in Marine Exposed Concretes Containing PFA," In: Corrosion of Reinforcement in Concrete, Warwickshire, UK, 1990, pp. 198-212
  11. Andrade, C., Castelo, V., Alonso, C., and Gonzalez, J. A., "The Determination of the Corrosion Rate of Steel Embedded in Concrete by Polrization Resistance and AC Impedance Methods," In: Corrosion Effect of Stray Currents and the Techniques for Evaluating Corrosion of Rebar in Concrete, V. Chaker, eds., ASTM STP 906, 1986, pp. 46-57
  12. Ann, K. Y., Song, H. W., Lee, C. H., and Lee, K. C., "Buildup of Surface Chloride and Its Influence on Corrosion Initiation Time of Steel in Concrete," EASEC-10, The Tenth East Asia-Pacific Conference on Structural Engineering & Construction, Bangkok, Thai, Aug. 3-5, 2006, pp. 767-772
  13. Broomfield, J. P., "Corrosion of Steel in Concrete-Understanding," Investigation and Repair, E&FN Spon, 1997, pp. 222-235
  14. Cady, P. D., "Corrosion of Reinforcing Steel, Significance of Tests and Properties of Concrete and Concrete Making Materials," STP-169B, ASTM, Philadelphia, 1978, pp. 275-299
  15. Hausmann, D. A., "Steel Corrosion in Concrete," Mater Protection, Vol. 11, 1967, 19 pp
  16. Hope, B. B. and Alan, K. C., "Chloride Corrosion Threshold in Concrete," ACI Mater J., Vol. 43, 1987, pp. 306-314
  17. Schiessl, P. and Breit, W., "Local Repair Measures at Concrete Structures Damaged by Reinforcement Corrosion," Proceedings of the Fourth International Symposium on Corrosion of Reinforcement in Concrete Constructionm, Cambridge, 1996, pp. 525-534
  18. Song, H. W., Ann, K. Y., Lee, C. H., and Lee, K. C., "Corrosion of Steel in Mortars Containing OPC, PFA, GGBS and SF with Chlorides in Cast," The 4th Civil Engineering Conference in the Asian Region, Taipei, Taiwan, Jun. 25-28. 2007, pp. 80-83
  19. Song, H. W., Ann, K. Y., and Kim, T. S., "Assessing the Resistance of Cementitious Binders to Chloride-Induced Corrosion of Steel Embedment Via Electrochemical and Microstructural Studies," International Corrosion Engineering Conference, May 20-24, 2007, pp. 149-153
  20. Saraswathy, V. and Song, H. W., "Effectiveness of Fly aSh Activation on the Corrosion Performance of Steel Embedded In Concrete," Mag Concr Res., Accepted, 2007
  21. Saraswathy, V. and Song, H. W., "Evaluation of Corrosion Resistance of Portland Pozzolana Cement and Fly Ash Blended Cements in Pre-Cracked Reinforced Concrete Slabs under Accelerated Testing Conditions," Mat Chemi Phy., Vol. 104, No. 2-3, 2007, pp. 356-361 https://doi.org/10.1016/j.matchemphys.2007.03.033
  22. Song, H. W. and Saraswathy, V., "Analysis of Corrosion Resistance of Inhibitors in Concrete Using Electrochemical Studies," Met and Mat Int., Vol. 12, No. 4, 2006, pp. 323-329 https://doi.org/10.1007/BF03027549
  23. Saraswathy, V. and Song, H. W, "Electrochemical Studies on the Corrosion Performance of Steel Embedded in Activated Fly Ash Blended Concrete," Electrochimica Acta., Vol. 51, 2006, pp. 4601-4611 https://doi.org/10.1016/j.electacta.2006.01.005
  24. Saraswathy, V. and Song, H. W., "Corrosion Performance of Fly Ash Blended Cement Concrete: A State of Art Review," Corros Rev., Vol. 24, No. 1-2, 2006, pp. 87-122
  25. Saraswathy, V. and Song, H. W., "Performance of Galvanized and Stainless Steel Rebars in Concrete under Macrocell Corrosion Conditions," Mat Corros., Vol. 56, No. 10, 2005, pp. 685-691 https://doi.org/10.1002/maco.200503888
  26. Song, H. W. and Ann, K. Y., "Chloride Threshold Level for Corrosion of Steel in Concrete," Corros Sci., Vol. 49, 2007, pp. 4113-4133 https://doi.org/10.1016/j.corsci.2007.05.007
  27. Glass, G. K. and Buenfeld, N .R., "The Presentation of the Chloride Threshold Level for Corrosion of Steel in Concrete," Corros Sci., Vol. 39 1997, pp. 1001-1013 https://doi.org/10.1016/S0010-938X(97)00009-7
  28. Song, H. W., Ann, K. Y., Lee C. H., and Jung, M. S., "Chloride Threshold Value for Stell Corrosion in Concrete Considering the Buffering Capacity against a Fall in the pH," ACI Mat J., In Press, 2008
  29. Thomas, M. D. A., "Chloride Thresholds in Marine Concrete," Cem and Concr Res., Vol. 26, No. 4, 1996, pp. 513-519 https://doi.org/10.1016/0008-8846(96)00035-X

Cited by

  1. Durability Assessment of High Strength Concrete with High Volume Mineral Admixture vol.27, pp.6, 2015, https://doi.org/10.4334/JKCI.2015.27.6.641
  2. An Experimental Study on the Chloride Attack Resistibility of Alkali-Activated Ternary Blended Cement Concrete vol.16, pp.4, 2016, https://doi.org/10.5345/JKIBC.2016.16.4.321
  3. Performance Based Evaluation of Concrete Chloride Diffusion Resistance from Wind Speed-Sunlight Exposure Time Curing Conditions of Climate Change vol.28, pp.5, 2016, https://doi.org/10.4334/JKCI.2016.28.5.601
  4. The Influence of Specimen Volume on the Adiabatic Temperature Rise of Concrete vol.24, pp.6, 2012, https://doi.org/10.4334/JKCI.2012.24.6.659
  5. A Comparative Study on Strength Development, Chloride Diffusivity and Adiabatic Temperature Rise of Marine Concrete Depending on Binder Type vol.25, pp.4, 2013, https://doi.org/10.4334/JKCI.2013.25.4.411
  6. The Effect of Specimen Size on the Results of Concrete Adiabatic Temperature Rise Test with Commercially Available Equipment vol.7, pp.12, 2014, https://doi.org/10.3390/ma7127861