Abstract
A new modified full scale double tee slabs with the length of nib plate - 1,500 mm were suggested, designed, and experimentally evaluated up to the loading of flexural failure. This slabs were composed of the tee section which was same to original PCI double tee and the plate section which was modified in a new shape, and the prestressing force was applied at the bottom of tee section only. This specimens were made from the domestic precast factory. The safety and serviceability of the modified nib plate with the dapped ends were evaluated up to the ultimate flexural strength of tee section. As the experimental loading increased, the flexural crackings developed first in the bottom of the slab and they changed to the increased flexural shear and inclined shear crackings in the nib and dapped portion of the double tees. The suggested modified double tee slabs failed in ductile above the design loading with many evenly distributed flexural crackings. The thickness of nib plate - 250 mm does not show any cracking under the service loading and show several minor flexural cracking up to the ultimate state of tee portion. The proposed specimens were satisfied with the strength and ductility requirements in the design code provisions in the tests. Additional experimental tests are required to reduce the depth and tensile reinforcement of nib plate concrete for the practical use of this system effectively.
니브 플레이트 길이가 1,500 mm인 새로운 실물크기 개량 더블티 슬래브를 제안, 설계하고 종국 휨강도까지 실험에 의하여 평가하였다. 이 슬래브는 기존의 PCI 더블티와 같은 티 (tee)단면과 새로이 개조된 플레이트단면으로 구성되어있으며, 긴장력은 티 (tee)단면 하부에만 적용되었다. 이 실험체는 국내 프리캐스트 공장에서 제작한 실험체이다. 휨실험에 의하여 티 (tee)단면이 종국 휨강도를 발휘할 때까지 개조된 댑단부를 포함한 니브 플레이트 단면의 안전성과 사용성을 평가하려 하였다. 하중을 가력할수록 초기 휨 균열들이 더블티 하단에서 발생하였고, 그 후 휨전단과 사인장 균열들은 댑단부와 니브 부분으로 증가하여 발생하였다. 제안한 개량 더블티 슬래브는 설계하중 이상의 휨 내력으로 고르게 분포된 많은 휨균열과 함께 연성 파괴되었다. 두께 250 mm의 니브 플레이트부분은 사용하중 하에서 어떠한 균열도 발생하지 않았고, 티 (tee)부분의 극한하중 하에서도 미소한 휨균열만 보여주었다. 제안하는 실험체는 이 실험에서 설계기준 조건을 만족시키는 강도와 연성거동을 보여주었다. 보다 효율적인 활용을 위하여, 니브 플레이트 두께와 인장철근을 감소시킬 수 있는 추가 실험이 제안하는 개량 댑 더블티에 대하여 요구된다.