DOI QR코드

DOI QR Code

PMM for Surface Treatment of Concrete with the Utilization of By-Products

  • Drochytka, Rostislav (Brno University of Technology, Faculty of Civil Engineering, Dept. of Technology of Building Materials and Components) ;
  • Zizkova, Nikol (Brno University of Technology, Faculty of Civil Engineering, Dept. of Technology of Building Materials and Components)
  • Published : 2008.06.30

Abstract

The disadvantage of PMM's (polymer-modified mortars) that are currently on the market is the utilization of expensive polymer additives and also the cost of the other components. One of the possibilities how to decrease this price is the effective utilization of waste materials which are very inexpensive in spite of their good properties. The combinations of different degree in polymer adhesiveness and waste secondary raw materials - fly ash - are experimentally verified in the paper. The use of fly ash in adhesive materials for ceramic tiles is limited by unsatisfactory initial adhesiveness to sintered ceramic sherd as a result of a running pozzolanic reaction that lowers the efficiency of polymer additives. On the other hand, the use of adhesive and backfill coating materials for gluing ETICS board insulation materials has brought very good results.

Keywords

References

  1. Dluhos, J., Materiály a technologie: Plasty a Vybrane Nekovove Matenialy (Materials and Technology: Plastics and Selected Non-Metal Materials), 1st ed., Ostrava: NIS, ISBN 80-7042-052-9, 1993, 73 pp
  2. Drochytka, R., et al., Keramicke Obklady a Dlazby (Ceramic Tiling and Paving), Vega s.r.o., Hradec Kralove, ISBN 80-900860-5-5, 2000
  3. www.heizkosten-einsparen.de
  4. Pytlik, P., Ekologie ve stavebnictvi (Ecology in Building Industry), 1st ed., Praha: SIA, ISBN 80-85380-38-2, 136 s, 1997
  5. Knoblauch, H., Schneider, U. Bauchemie, 1st ed. Dusseldorf: Werner Verlag, ISBN 3-8041-4895-6, 2001, 410 pp
  6. www.waste.fce.vutbr.cz
  7. Sauman, Z., Maltoviny I (Mortars I), 1st ed., Brno: the University of Technology, ISBN 80-214-0509-0, 1993, 198 pp
  8. Zizkova, N., Verification of Modification of Polymer-Modified Mortars by Waste Materials, Ph.D. Thesis at the University of Technology in Brno, Faculty of Civil Engineering, Department of Technology of Building Materials and Components, Brno, 2004