DOI QR코드

DOI QR Code

A Study on the Pattern Making Theory for Steeve Cap Part of Sleeve Pattern Appropriate for the Characteristics of Arm Form

팔 형태특성에 적합한 소매패턴의 소매산부분 제도이론

  • Published : 2008.04.30

Abstract

In this study, seven models with distinctly different body types were researched and explanatory variables were reviewed. Review was done by using body measurements and the measurements of the appropriate bodice patterns in 1D, 2D, and 3D measurement methods in order to review the pattern making system and the equations for calculating the dimensions of the sleeve caps, which are readily available. Data on human bodies, which can be the criteria for each body part required for the new system for making sleeve cap part, were selected considering conditions such as items with a significantly high contribution rate from the results of regression analysis and the easiness of measurement. As a result of research, an explanatory variable required for the system for making sleeve caps with high general use was extracted. All items with the exception of the waist circumference and upper arm circumference were about the measurement of the form of human bodies, which were newly set in this study. As a result of this study, the equations for calculating the dimensions of each part of the sleeve caps showed distinct differences in comparison to the conventional system of construction.

Keywords

References

  1. 近藤れん子. (1988). 近藤れん子の婦人服造形理論とPattern. 東京: 株式會社原流社v
  2. 唐木勇. (1979). アパレルデザインのための新フラットパタ一ン技法.基本アパレル編. 東京: バンタンデザイン硏究所
  3. 大川由子, ?垣勝彦, 河內光義. (1997). 袖原型と立體モデ ルの展開と形莊 比較. 家政誌, 48(6), 523-529
  4. 柳澤澄子, 原田藤枝. (1966). Dress patternの基礎と應用. 東京: 柴田書店
  5. 文化服裝學院編. (1984). 文化ファッション講座婦人服1. 東京: 文化出版局
  6. 三吉滿智子. (1979). パタンメキングの要因II. 衣生活, 22(2), 15-21
  7. 三吉滿智子. (1983). パタンメキングの要因IV. 衣生活, 6(3), 16-23
  8. 三吉滿智子. (2001). 服裝造形學理論編I. 東京: 文化女子大學校科書出版部
  9. 三吉滿智子, 金金花. (1999). 三次元計測莊置による人體水平斷面形狀の計測. 日本纖維製品消費科學會誌, 40(8), 539-547
  10. 三吉滿智子, 廣川妙子. (2001). 衣服パタン設計のための ジャケット着用時空隙量計測方法の硏究-三次元計測 裝置を用いて-. 日本纖維製品消費科學會誌, 42(4), 233-242
  11. 杉野芳子. (1968). 新ドレメ式洋裁(上). 東京: 株式會社光文社
  12. 柴山登光. (2004). 続.服作りQ&A. 東京: 株式會社アパレ ル工業新聞社
  13. 伊東茂平, 伊東孝. (1962). 私の裁洋敎室下卷. 東京: 株式會社婦人畵報社
  14. 日本纖維製品消費科學會. (1974). 消費科學會例題を中心 とした消費科學のためのデ一タ處理法. 大阪: 社團法人 日本纖維製品消費科學會
  15. 田中千代. (1966). 洋裁. 東京: 株式會社同志社
  16. 趙耕熙, 三吉滿智子. (2003). 成人女子用袖パタン作のための上肢.幹部形態特性について. 日本纖維製品消費科學會誌消誌纖消誌, 44(1), 46-55
  17. 趙耕熙, 三吉滿智子. (2005). 成人女子用袖パタンと上肢.體幹部形態特性の關係-上肢の形態特性に適合した袖山部デ一タ化の檢討-. 日本纖維製品消費科學會誌, 46(10), 35-50
  18. 椙山藤子. (1966). 被服構成(上). 東京: 廣川書店
  19. 土井サチヨ. (1986). 體型と衣服. 東京: 同文書院

Cited by

  1. The Relevances of the Ease and the Appearance by Changing the Sleeve Cap Height Using Virtual Garment System vol.23, pp.2, 2012, https://doi.org/10.7856/kjcls.2012.23.2.189
  2. Evaluation of Armhole Lines of Blouses Using 3D Virtual Fitting and Human Subjects vol.25, pp.6, 2016, https://doi.org/10.5934/kjhe.2016.25.6.761
  3. The Sleeve-Cap Part Drafting Method of the General-Purpose Sleeve Pattern and the Verification of Compatibility vol.16, pp.3, 2012, https://doi.org/10.12940/jfb.2012.16.3.078