반도체디스플레이기술학회지 (Journal of the Semiconductor & Display Technology)

한국반도체디스플레이기술학회 (The Korean Society Of Semiconductor & Display Technology)
권호 표지

분위기 가스에 따른 ITO 박막의 전기적 및 구조적 특성

Electrical and Structural characteristics of ITO thin films deposited under different ambient gases

  • 허주희 (한국기술교육대학교 신소재공학과) ;
  • 한대섭 (한국기술교육대학교 신소재공학과) ;
  • 이유림 (한국기술교육대학교 신소재공학과) ;
  • 이규만 (한국기술교육대학교 신소재공학과) ;
  • 김인우 (삼성전자 AMLCD 사업부)
  • Heo, Ju-Hee (Dept. of Materials Engineering, Korea University of Technology and Education) ;
  • Han, Dae-Sub (Dept. of Materials Engineering, Korea University of Technology and Education) ;
  • Lee, Yu-Lim (Dept. of Materials Engineering, Korea University of Technology and Education) ;
  • Lee, Kyu-Mann (Dept. of Materials Engineering, Korea University of Technology and Education) ;
  • Kim, In-Woo (AMLCD Division, Samsung Electronics)
  • 발행 : 2008.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

ITO (Indium Tin Oxide) thin films have been extensively studied for OLED devices because they have high transparent properties in the visible wavelength and a low electrical resistivity. These ITO films are deposited by rf-magnetron sputtering under different ambient gases (Ar, Ar+$O_2$ and Ar+$H_2$) at $300^{\circ}C$. In order to investigate the influences of the oxygen and hydrogen, the flow rate of oxygen and hydrogen in argon has been changed from 0.5sccm to 5sccm and from 0.01sccm to 0.25sccm respectively. The resistivity of ITO film increased with increasing flow rate of $O_2$ under Ar+$O_2$ while it is nearly constant under Ar+$H_2$. And the peak of ITO films obtained (222) and (400) orientations and the average transmittance was over 80% in the visible range. The OLED device fabricated with different ITO substrates made by configuration of ITO/$\alpha$-NPD/Alq3/LiF/Al to elucidate the performance of ITO substrate for OLED device.

키워드