DOI QR코드

DOI QR Code

Optimal Design of Grid Cathode Structure in Spherically Convergent Beam Fusion Device

구형 집속 빔 핵융합 장치에서 그리드 음극 구조의 최적 설계

  • 주흥진 (한양대학교 전기공학과) ;
  • 박정호 (한양대학교 전기공학과) ;
  • 황휘동 (한양대학교 전기공학과) ;
  • 최승길 (안산공과대학 전기공학과) ;
  • 고광철 (한양대학교 전기제어생체공학부)
  • Published : 2008.04.01

Abstract

Neutron production rate in spherically convergent beam fusion(SCBF) device as a portable neutron source strongly depends on the ion current and the grid cathode structure. In this paper, as the process of design and analysis, Design of Experiment(DOE) based on the results by Finite Element Method-Flux Corrected Transport(FEM-FCT) method is employed to calculate the ion current. This method is very useful to find optimal design conditions in a short time. Number of rings, radius of rings, and distance between the grid cathode and center are selected as control factors. From the results in the optimized model, the higher ion current is calculated and deeper potential well is also observed.

Keywords

References

  1. K. Yoshikawa, K. Takiyama, K. Masuda, M. Ohnishi, and N. Inoue, "Strongly localized potential profile measurements through stark effects in the central core region of an inertial electrostatic fusion device", Fusion Technology, Vol. 39, p. 1193, 2001 https://doi.org/10.13182/FST01-A173
  2. M. Ohnishi, K. H. Sato, Y. Yamamoto, and K. Yoshikawa, "Correlation between potential well structure and neutron production in inertial electrostatic confinement fusion", Nuclear Fusion, Vol. 37, p. 611, 1997 https://doi.org/10.1088/0029-5515/37/5/I04
  3. 이상복, "(Minitab을 이용한) 다구찌 기법 활 용", 이레테크, 2001
  4. P. T. Farnsworth, "Electric Discharge Device for Producing Interactions Between Nuclei", U.S. Patent, 1966
  5. R. L. Hirsch, "Inertial-electrostatic confinement of ionized fusion gases", Journal of applied physics, Vol. 38, No. 11, p. 4522, 1967 https://doi.org/10.1063/1.1709162
  6. 최승길, 김규호, "진공 인터럽터의 쉴드 형상 최적설계", 전기전자재료학회논문지, 20권, 4 호, p. 374, 2007 https://doi.org/10.4313/JKEM.2007.20.4.374
  7. 하덕용, "유한요소법 및 실험계획법에 의한 종자계형 진공 인터럽터의 최적설계", 한양대 학교 박사학위논문, 2001
  8. 현정수, 최승길, 심재학, 강형부, "SF6 가스 방전 특성의 유한요소 해석", 전기전자재료학회논문지, 13권, 11호, p. 265, 2000
  9. N. Sato, "Discharge current induced by the motion of charged particles", Journal of Physics D, Applied Physics, Vol. 13, p. L3, 1980 https://doi.org/10.1088/0022-3727/13/1/002
  10. 민웅기, 김형석, 이석현, 한송엽, "FEM-FCT 기법을 이용한 코로나 방전 시뮬레이션에 대 한 연구", 대한전기학회논문지, 48권, 3호, p. 200, 1999