References
- E. Ma, 2002, High tensile ductility in a nanostuctured metal, Nature, Vol. 419, pp. 912-915 https://doi.org/10.1038/nature01133
- E. Ma, 2003, Instabilities and ductility of nanocrystalline and ultrafine-grained metals, Scripta Mater., Vol. 49, pp. 663-668 https://doi.org/10.1016/S1359-6462(03)00396-8
- M. W. Chen, 2002 Enhanced tensile ductility in nanostructured Cu, Appl. Phys. Lett., Vol. 80, pp. 2395-2397 https://doi.org/10.1063/1.1465528
- W. J. Nam, 2004, Effect of annealing temperature on microstructures and mechanical properties of a 5083 Al alloy deformed at cryogenic temperature, Scripta Mater., Vol. 51, pp. 355-359 https://doi.org/10.1016/j.scriptamat.2004.02.037
- T. G. Langdon, 2001, Deformation heating and its effect on grain size evolution during Equal Channel Angular Extrusion, Scripta Mater., Vol. 44, pp. 135-140 https://doi.org/10.1016/S1359-6462(00)00565-0
- E. J. Lavernia, 2001, Grain growth of nanocrystalline Ni powders prepared by cryomilling, Int. Metall. Mater. Trans., Vol. 32A, pp. 3109-3115
- E. J. Lavernia, 2002, Grain growth behavior of cryomilled INCONEL 625 powder during isothermal heat treatment, Metall. Mater. Trans., Vol. 33A, pp. 125-134
- D. J. Yoon, E. Z. Kim, Y. S. Lee, 2007, Finite Element Study on Deformation Characteristics and Damage Evolution in Warm Backward Extrusion of AZ31 Mg Alloys, Trans. Mater. Proc., Vol. 16, pp. 614-620
- H. K. Yi, Y. H. Moon, J. H. Lee, Y. S. Lee, 2007, Prediction for Forming Limit of Tube Warm Hydroforming Based on the Ductile Fracture Criteria, Trans. Mater. Proc., Vol. 16, pp. 426-431
- S. D. Kim, Y. N, Kwon, J. H Lee, S. H Kang, 2007, A Study on Warm Forging of Magnesium Alloy Impeller, Trans. Mater. Proc., Vol. 16, pp. 288-292
- M. H. Lee, H. Y. Kim, H. J. Kim, H. K Kim, S. I Oh, 2007, Forming Analysis for Warm Deep Drawing Process of Magnesium Alloy Sheet, Trans. Mater. Proc., Vol. 16, pp. 401-405
- G. D. Kim, H. K. Kim, 2007, Evaluation of Formability Sensitivity to Die Design in Warm Square Cup Deep Drawing of AZ31 Sheet, Trans. Mater. Proc., Vol. 16, pp. 120-125
- H. K. Kim, W. R. Lee, S. K. Hong, J. D. Kim, B. K. Han, 2006, Finite-Element Analysis of Warm Square Cup Deep Drawing Process of Magnesium Alloy AZ31 Sheet, Trans. Mater. Proc., Vol. 15, pp. 232-240
- M-S. Rhee, D-M. Kang, 2006, Improvement of Formability of AZ31 Magnesium Alloy Sheet during Warm Deep Drawing, Trans. Mater. Proc., Vol. 15, pp. 148-152
- D. J. Yoon, S. J. Lim, E. J. Kim, C. Cho, 2006, Plastic Forming Characteristics of AZ3l Mg Alloy in Warm Backward Extrusion, Trans. Mater. Proc., Vol. 15, pp. 597-602
- H. G. Kim, J. W Bae, D. K. Choo, C. G. Kang, 2006, A Study on the Deep Drawing of AZ31B Magnesium Sheet at Warm and Hot Temperature, Trans. Mater. Proc., Vol. 15, pp. 504-511
- H. K. Kim, J. D Kim, 2006, Evaluation of Warm Deep Drawability of Magnesium Alloy AZ31 Sheet Using Solid-Type Lubricants, Trans. Mater. Proc., Vol. 15, pp. 453-458
Cited by
- Prediction of Formability of Aluminum Alloy 5454 Sheet vol.36, pp.2, 2012, https://doi.org/10.3795/KSME-A.2012.36.2.179