Journal of Advanced Marine Engineering and Technology

  • 제32권2호
  • /
  • Pages.262-267
  • /
  • 2008
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지
DOI QR코드

DOI QR Code

플라스마 이온증착 기술을 이용한 스테인리스강의 질화처리에 관한 연구

Research of Nitriding Process on Austenite Stainless Steel with Plasma Immersion Ion Beam

  • 김재돌 (동명대학교 냉동공조공학과) ;
  • 박일수 (동명대학교 냉동공조공학과) ;
  • 옥철호 (부산정보대학 기계자동차공학부)
  • 발행 : 2008.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Plasma immersion ion beam (PIIB) nitriding process is an environmentally benign and cost-effective process, and offers the potential of producing high dose of nitrogen ions in a way of simple, fast and economic technique for the high plasma flux treatment of large surface area with nitrogen ion source gas. In this report PIIB nitriding technique was used for nitriding on austenite stainless steel of AISI304 with plasma treatment at $250{\sim}500^{\circ}C$ for 4 hours, and with the working gas pressure of $2.67{\times}10^{-1}$ Pa in vacuum condition. This PIIB process might prove the advantage of the low energy high flux of ion bombardment and enhance the tribological or mechanical properties of austenite stainless steel by nitriding, Furthermore, PIIB showed a useful surface modification technique for the nitriding an irregularly shaped three dimensional workpiece of austenite stainless steel and for the improvement of surface properties of AISI 304, such as hardness and strength

키워드

참고문헌

  1. S. Mandl, R. Gunzel, E. Richter and W. Moller, Surface and Coatings Technology, Vol. 100-101(1998), pp. 372-376 https://doi.org/10.1016/S0257-8972(97)00651-8
  2. B. Larisch, U. Brusky and H. -J. Spies, Surface and Coatings Technology, Vol. 116-119 (1999), pp. 205-211 https://doi.org/10.1016/S0257-8972(99)00084-5
  3. S. J. Bull, A. M. Jones and A. R. McCabe, Surface and Coatings Technology, Vol. 83(1996), pp. 257- 262 https://doi.org/10.1016/0257-8972(95)02827-7
  4. E. Menthe, A. Bulak, J. Olfe, A. Zimmermann and K. T. Rie, Surface and Coatings Technology, Vol. 133-134(2000), pp. 259-263 https://doi.org/10.1016/S0257-8972(00)00930-0
  5. V. Singh, K. Marchev, C. V. Cooper and E. I. Meletis, Surface and Coatings Technology, Vol. 160(2002), pp. 249-258 https://doi.org/10.1016/S0257-8972(02)00403-6
  6. Y. Jiraskova, G. Brauer, O. Schnee- weiss, C. Blawert, W. Anwand and P. G. Coleman, Applied Surface Science, Vol. 194(2002), pp. 145-149 https://doi.org/10.1016/S0169-4332(02)00115-0
  7. C. Blawert, B. L. Mordike, G. A. Collins, K. T. Short and J. Tendys, Surface and Coatings Technology, Vol. 103-104(1998), pp. 240-247 https://doi.org/10.1016/S0257-8972(98)00402-2
  8. E. Richter, R. Gunzel, S. Parasa- candola, T. Telbizova, O. Kruse and W. Moller, Surface and Coatings Technology, Vol. 128-129(2000), pp. 21-27 https://doi.org/10.1016/S0257-8972(00)00638-1
  9. S. Picard, J. B. Memet, R. Sabot, J. L. Grosseau Poussard, J. P. Rivière and R. Meilland, Materials Science and Engineering A, Vol. 303(2001), pp. 163-172 https://doi.org/10.1016/S0921-5093(00)01841-4
  10. S. Leigh, M. Samandi, G. A. Collins, K. T. Short, L. Wielunski and P. Martin, Surface and Coatings Technology, Vol. 85(1996), pp. 37-43 https://doi.org/10.1016/0257-8972(96)02876-9
  11. X. L. Xu, L. Wang, Z. W. Yu and Z. K. Hei, Surface and Coatings Technology, Vol. 132(2000), pp. 270-274 https://doi.org/10.1016/S0257-8972(00)00905-1
  12. X. B. Tian, Y. X. Leng, T. K. Kwok, L. P. Wang, B. Y. Tang and P. K. Chu, Surface and Coatings Technology, Vol. 135(2001), pp. 178-183 https://doi.org/10.1016/S0257-8972(00)00996-8
  13. L. Wang, X. Xu, Z. Yu and Z. Hei, Surface and Coatings Technology, Vol. 124(2000), pp. 93-96 https://doi.org/10.1016/S0257-8972(99)00637-4
  14. L. Wang, X. Xu, B. Xu, Z. Yu and Z. Hei, Surface and Coatings Technology, Vol. 131(2000), pp. 563-567 https://doi.org/10.1016/S0257-8972(00)00836-7
  15. 박일수, 옥철호, 김재돌, 플라즈마 이온장착 기술을 이용한 스테인레스강의 질화처리에 관한 연구, 한국마린엔지니어링학회 전기학술대회 논문집(2007), pp. 349-353