Abstract
In case of cut-slopes or shallow-depth tunnels, sliding along with discontinuities or rotation could play a critical role in judging stability. Although numerical analysis is widely used to check the stability of these cut-slopes and shallow-depth tunnels in early design process, common analysis programs are based on continuum model. Performing continuum model analysis regarding discontinuities is possible by reducing overall strength of jointed rock mass. It is also possible by applying ubiquitous joint model to Mohr-Coulomb failure criteria. In numerical analysis of cut-slope, main geotechnical properties such as cohesion, friction angle and elastic modulus can be evaluated by empirical equations. This study tried to compare two main systems, RMR and GSI system by applying them to in-situ hazardous cut-slopes. In addition, this study applied ubiquitous joint model to simulation model with inputs derived by RMR and GSI system to compare with displacements obtained by in-situ monitoring. To sum up, numerical analysis mixed with GSI inputs and ubiquitous joint model proved to provide most reliable results which were similar to actual displacements and their patterns.
절토사면 및 천심도 터널의 경우 불연속면을 따른 블록의 미끄러짐 및 회전 등이 안정성에 큰 영향을 미친다. 절토사면이나 터널의 초기 설계 단계에서 안정성 검토를 위해 수치해석을 널리 사용하는데, 대부분의 상용화된 프로그램들은 연속체 해석에 기반을 두고 있다. 불연속면을 고려하여 연속체 해석을 수행할 수도 있으며, 절리를 포함한 암반자체의 강도를 감소시킴으로써 모사하는 것이 대표적인 방법이다. 또한, 연속체 해석방법인 Mohr-Coulomb 모델에 편재 절리모델 (ubiquitous joint model)을 적용함으로써 불연속면을 고려하는 방법이 있다. 절토사면의 수치해석시 주 입력치인 절리암반의 점착력, 마찰각, 탄성계수 등은 암반분류법(rock classification system)에 의한 경험식으로 도출할 수 있으며, 본 논문에서는 이 중 RMR 및 GSI 시스템에 의한 경험식을 통해 얻은 입력치를 실제 위험절토사면에 적용함으로써 두 시스템의 차이를 비교해 보고자 하였다. 또한 RMR 및 GSI 시스템으로 도출한 입력치에 편재절리모델을 혼합하여 적용함으로써 계측을 통해 얻은 변위량 및 변위양상과의 차이를 분석하였다. 분석 결과 GSI 시스템으로 도출한 입력치에 편재절리모델을 혼합하였을 경우의 수치해석결과가 실제현장의 변위량 및 변위양상과 가장 유사한 결과를 얻을 수 있음을 확인할 수 있었다.