References
- 노동부, 산업재해현황분석, 2006
- 한국산업안전공단, 산업재해원인조사, 2005
- Aghazadeh, F. and Mital, A., Injuries due to handtools: Results of a questionnaire, Applied Ergonomics, 18(4), 273-278, 1987 https://doi.org/10.1016/0003-6870(87)90134-7
- rmstrong, T., Foulke, J., Joseph, B. and Goldstein, S., Investigation of cumulative trauma disorders in a poultry processing plant, American Industrial Hygiene Association Journal, 43, 103-116, 1982 https://doi.org/10.1080/15298668291409433
- Bridger, R. S., Introduction to ergonomics, McGraw-Hill, 1995
- Cacha, C. A., Ergonomics and safety in hand tool design, Lewis Publishers: New York, 1999
- Chaffin, D. B., Andersson, G. B. J. and Martin, B. J., Occupational biomechanics, 3rd ed., Wiley, 1999
- Dempsey, P. G., McGorry, R. W., Leamon, T. B. and O'Brien, N., Bending the tool and the effect on human performance: Further investigation of the simulated wire-twisting task, American Industrial Hygiene Association Journal, 63, 586-593, 2002 https://doi.org/10.1080/15428110208984744
- Emanuel, J., Mills, S. and Bonnett, J., "In search of a better handle", Proceedings of the Symposium: Human Factors and Industrial Design in Consumer Products, Melford. MA. 1980
- Fogleman, M. T., Freivalds, A. and Goldberg, J. H., An ergonomic evaluation of knives for two poultry cutting tasks, International Journal of Industrial Ergonomics, 11, 257-265, 1993 https://doi.org/10.1016/0169-8141(93)90114-S
- Granada, M. and Konz, S., "Evaluation of bent hammer handles", Proceedings of the Human factors Society 25th Annual Meeting(pp. 322-324), Santa Monica. CA, 1981
- Hsu, S. H. and Chen, Y. H., Evaluation of bent-handle files, International Journal of Industrial Ergonomics, 25, 1-10, 1999
- Kluth, K., Zuhlke, D. and Strasser, H., "Product-ergonomic evaluation of pliers handles through electromyographic and subjective methods", Proceedings of the IEA 2000/HFES 2000 Congress(Vol. 6, pp. 137 -140), Santa Monica. CA, 2000
- Konz, S., Bent hammer handles, Human Factors, 28, 317-323, 1986 https://doi.org/10.1177/001872088602800307
- Kroemer, K., Kroemer, H. and Koremer-Elbert, K., Ergonomics: How to design for ease and efficiency, Prentice-Hall, 1994
- Krohn, R. and Konz, S., "Bent hammer handles", Proceedings of the Human Factors Society 26th Annual Meeting(pp. 413-417), Santa Monica. CA, 1982
- Pulat, B. M., Fundamentals of Industrial ergonomics, Prentice-Hall, 1992
- Schoenmarklin, R. W. and Marras, W., Effects of handle angle and work orientation on hammering: I. Wrist motion and hammering performance, Human Factors, 31(4), 397-411, 1989a https://doi.org/10.1177/001872088903100404
- Schoenmarklin, R. W. and Marras, W., Effects of handle angle and work orientation on hammering: II. Muscle fatigue and subjective ratings of body discomfort, Human Factors, 31(4), 413-420, 1989b https://doi.org/10.1177/001872088903100405
- Tichauer, E. R., The biomechanical basis of ergonomics: Anatomy applied to the design of work stations, Wiley, 1978
- You, H., Kumar, A., Young, R., Veluswamy, P. and Malzahn, D. E., An ergonomic evaluation of manual Cleco plier designs: Effects of rubber grip, spring recoil, and worksurface angle, International Journal of Industrial Ergonomics, 36, 575-583, 2005
Cited by
- Ergonomic Design of Magic Saw Handle vol.31, pp.3, 2012, https://doi.org/10.5143/JESK.2012.31.3.469