DOI QR코드

DOI QR Code

위성의 개념설계 절차

Conceptual Design Procedure of Satellites

  • 윤중섭 (인하대학교 항공우주공학과) ;
  • 박우성 (인하대학교 항공우주공학과) ;
  • 유창경 (인하대학교 항공우주공학과) ;
  • 최기영 (인하대학교 항공우주공학과) ;
  • 김희섭 (한국항공우주연구원)
  • 발행 : 2008.04.01

초록

위성의 전력계, 질량, 비용 등과 같은 형상 요소들의 개략적인 제원 도출은 본격적인 위성개발 전 반드시 수행되어야 할 중요한 과정이다. 본 논문에서는 최근 개발된 국내외 위성 개념설계 도구들의 주요한 특징들을 조사하고, 이를 바탕으로 초기 개념설계 절차를 정리하였다. 위성 개념설계는 탑재체와 임무에 근거하여 필요한 전력을 추정하고 위성운용에 필요한 태양전지판과 배터리와 같은 전력계를 추정한다. 다음으로 기존 위성들의 데이터베이스를 기반으로 탑재체질량에 따른 전체 위성 및 주요 서브시스템의 질량을 결정한다. 비용 역시 복잡한 계산 없이 기존 위성들의 데이터베이스를 바탕으로 대략적인 추정이 가능하다.

Design sketch of electrical power system, mass, and cost of a new satellite is an inevitable step preceding the full-scale development of the satellite. In this paper, major features of recently developed conceptual design tools of satellites are investigated. And, based on the surveying results, we summarize the conceptual design procedure of satellites. The required electrical power to support the operation of the payload mission determines the size of solar panel and battery. The mass of the integrated system and subsystems is then estimated based on the database of the previously developed satellites. Cost can also be roughly estimated using the database without consideration of complex calculations.

키워드

참고문헌

  1. M. Wilke, O. Quirmbach, H. Negele, E. Fricke, and E. Igenbergs, "MuSSat - A Tool For Model-Based System Engineering of Commercial Satellite Systems", 9th INCOSE Symposium, 1999
  2. M. Badecchi, B. Melton, and B. Gardini, "The ESA/ESTEC Concurrent Design Facility", Proceedings of EuSEC 2000, 2000
  3. T. Mosher, M. Barrera, D. Bearden, and N. Lao, "Integration of Small Stellite Cost and Design Models for Improved Conceptual Design-to-Cost", IEEE Proceedings of 1998 Aerospace Conference, Vol. 3, 1998, pp. 97-103
  4. M. Wilke, O. Quirmbach, M. Schiffner, and E. Igenbergs, "MuSSat - A Tool for satellite Design in Concept Design Centers", Proceedings of EuSEC 2000, 2000, pp. 337-344
  5. B. S. Ardalan, "Drawcraft: A Space Craft Design Tool For Integrated Concurrent Engineering", IEEE Proceedings of 2000 Aerospace Conference, Vol. 1, 2000, pp. 501-510
  6. 황기룡, 이보라, 김수정, 고성환, 권순경, 이미현, 장영근, "소형위성 개념설계를 위한 SEDT의 개발", 한국항공우주학회지, 제33권 제1호, 2005, pp. 93-103
  7. M. Bacchetti, A. Garutti, and J. E. Haines, "Spacecraft Electrical Power Subsystem Design Utilising the ESA-ESTEC Concurrent Design Facility (CDF)", Proceedings of IEEE 32nd Annual Power Electronics Specialists Conference(PESC), Vol. 4, 2001, pp. 2000-2005
  8. 류장수 외, 다목적 실용과학 위성의 시스템 설계연구, 최종연구보고서, 한국항공우주연구소, 1995
  9. E. Mahr and G. Richardson, "Development of the Small Satellite Cost Model (SSCM) Edition 2002", IEEE Proceedings of 2003 Aerospace Conference, Vol. 8, 2003, pp. 3831-3841