Abstract
The fatigue analysis is performed to avoid structural failure in aerospace structures under repeated loads. In this paper, the fatigue life is estimated for the design of tilt rotor UAV. First of all, the fatigue load spectrum for tilt rotor UAV is generated. Fatigue analysis is done for the flaperon joint which may have FCL(fracture critical location). Tilt rotor UAV operates at two modes: helicopter mode such as taking off and landing; fixed wing mode like cruising. To make overall fatigue load spectrum, FELIX is used for helicopter mode and TWIST is used for fixed wing mode. The other hand, the Kriging meta model is used to get S-N regression curve for whole range of material life when S-N test data are analyzed. And then, the second order of S-N curve is accomplished by the least square method. In addition, the coefficient of determination method is used to ensure how accuracy it has. Finally, the fatigue life of flaperon joint is compared with that obtained by MSC. Fatigue.
피로해석은 반복하중 하에서의 항공우주 구조물에 대한 구조적 파괴를 예방하기 위해 수행된다. 본 논문에서는 틸트로터형 무인 항공기에 대하여 피로수명에 대한 평가를 하였다. 먼저 틸트로터형 무인항공기의 기동에 맞는 하중 스펙트럼을 생성해 내었으며, F.C.L. 부품중 하나인 플랩퍼론 연결부위에 대하여 피로해석을 수행 하였다. 틸트로터형 무인항공기는 크게 두 가지 기동 형태로 나눌 수 있는데, 이 착륙시의 헬리콥터 형태와 순항시의 고정익 형태가 되겠다. 전체적인 피로하중 스펙트럼을 만들기 위해서 헬리콥터 형태에는 FELIX를, 고정익 형태에서는 TWIST를 사용하였다. 한편으로는, S-N 실험점이 해석에 사용될 때 재료수명의 전 영역에 대한 S-N 회귀식을 얻기 위하여 크리깅 메타 모델이 사용되었다. 그리고 최소 자승법을 이용한 이차 회귀식에 대한 S-N 커브 역시 생성하였다. 더욱이 이 커브들이 갖고 있는 정확도를 측정하기 위하여 결정 계수법을 사용하였다. 마지막으로는 플랩퍼론 연결 부위에 대한 피로수명 결과를 MSC. Fatigue와 비교하였다.