Textile Science and Engineering (한국섬유공학회지)

The Korean Fiber Society (한국섬유공학회)
권호 표지

Objective Evaluation of Banner Fabric Using Image Processing

이미지 프로세싱을 이용한 배너용 편직물 외관의 객관적 평가

  • Cho, Dae-Hwan (R&D Business Labs, Production R&D Center, Hyosung Corporation) ;
  • Jeong, Young-Jin (Department of Organic Materials and Fiber Engineering, Soongsil University)
  • 조대환 (㈜효성기술원 생산기술연구소) ;
  • 정영진 (숭실대학교 공과대학 유기신소재.파이버공학과)
  • Published : 2008.02.29
⟨ Previous Next ⟩

Abstract

The performance of warp knitted fabrics as banner application is influenced by the structure of the fabric. Especially, the level of visibility of a banner fabric is dependent on the evenness of the fabric, which is also influenced by the characters of the component yarns. Until now, the status of fabric surface has been subjectively determined by human, which gives us inconsistent results. Thus, we try to study an objective method using image processing which characterizes the surface status of banner fabric. To do this, we prepare six different samples and extract parameters defining the surface status with image technology. Using the parameters, we analyze the relation between the surface status and yarn characters.

Keywords

References

  1. D. H. Cho and Y. Jeong, 'Analysis on Interlacing Behavior of Multifilament Yarn Using High Speed Camera', Text Sci Eng, 2006, 43(2), 1-8
  2. D. H. Cho and D. S. Shim, 'A Weakly Interlaced Polyester Multifilament Yarn', Korea Patent, 10-0476878-0000(2005)
  3. B. Burkhard and Konigsbrunn, 'Flat Multifilament Yarn Having Low Opening Tendency and Good Compaction', US Patent, 5,518,814(1996)
  4. R. C. Gonzalez and R. E. Woods, 'Digital Image Processing', Addison Wesley, MA, 1992, pp.443-458
  5. J. C. Russ, 'The Image Processing Handbook', 2nd Ed., CRC Press, 1995, pp.155-165
  6. A. K. Jain, 'Fundamental of Digital Image Processing', Prentice Hall, Englewood Cliffs, NJ, 1989, pp.15-19
  7. N. H. Maerz, J. A. Franklin, and C. P. Bennett, 'Joint Roughness Measurement Using Shadow Profilometry', Int J Rock Mech Min Sci & Geomech Abstr, 1990, 27, 329-343