DOI QR코드

DOI QR Code

초음파 분무열분해를 이용한 $MgB_2$ 분말 합성

Synthesis of $MgB_2$ powders by ultrasonic spray pyrolysis

  • 박성창 (경상대 대학원 세라믹공학과) ;
  • 임영진 (경상대 대학원 세라믹공학과) ;
  • 강성구 (경상대 대학원 세라믹공학과) ;
  • 정준기 (창원대학교 산업기술 연구원) ;
  • 김찬중 (한국원자력연구원) ;
  • 김철진 (경상대 대학원 세라믹공학과)
  • 발행 : 2008.03.31

초록

Spherical $MgB_2$ powders was synthesized with the ultrasonic spray pyrolysis(USP) process using aqueous solutions of boron and magnesium ion. The properties of synthesized $MgB_2$ powder were characterized by XRD, SEM and EDS. A small amount of MgO was detected as the secondary phase out of the synthesized powder and the ratios of $MgB_2$ to MgO increased with increasing furnace temperature. The particle size and morphology of $MgB_2$ powder were investigated with varying molar concentration of the boron and magnesium solution and furnace temperature between $600^{\circ}C$ and $1000^{\circ}C$ in $Ar/H_2$. The average particle size of $MgB_2$ showed narrow distribution ranging from 300nm to 400nm. The morphology of particles exhibited mostly spherical shapes and uniform distribution.

키워드

참고문헌

  1. J. Nagamatsu, N. Nakagawa, Y. Zenitani, J. Akimitsu, "Superconductivity at 39 K in magnesium diboride" Nature,410, 63, 2001 https://doi.org/10.1038/35065039
  2. J.R. Thomson, M. Paranthaman, D.K. Christen, K.D. Sorge, H.J. Kim, J.G. Ossandon, "High temporal stability of supercurrents in $MgB_2$ materials" Supercond. Sci. Technol. 14, L16-L19, 2001 https://doi.org/10.1088/0953-2048/14/1/304
  3. D.C. Labalestier, M.O. Rikel, L.D. Cooley, A.A. Polyanskii, J.Y. Jiang, S. Patnaik, X.Y. Cai, D.M. Feldmann, A. Gurevich, A.A. Squitieri, M.T. Naous, C.B. Eom, E.E. Hellstrom, "Strongly linked current flow in polycrystalline forms of the superconductor $MgB_2$" Nature 410, 186-189, 2001 https://doi.org/10.1038/35065559
  4. H. Kitaguchi, A. Matsumoto, H. Kumakura, T. Doi, H. Yamamoto, K. Saitoh, H. Sosiati, S. Hata, "$MgB_2$ films with very high critical current densities due to strong grain boundary pinning" Appl. Phys. Lett. 85 : 14, 2842-2844, 2004 https://doi.org/10.1063/1.1805195
  5. J Jiang, B J Senkowicz, D C Larbalestier and E E Hellstrom, "Influence of boron powder purification on the connectivity of bulk $MgB_2$" Supercond. Sci. Technol. 19, L33-L36, 2006 https://doi.org/10.1088/0953-2048/19/8/L02
  6. B. J. Senkowicz, J. E. Giencke, S. Patnaik, C. B. Eom, E. E. Hellstrom, and D. C. Larbalestier,"Improved Upper Critical Field in Bulk-Form Magnesium Diboride by Mechanical Alloying With Carbon" Appl. Phys. Lett. 86, 202502, 2005 https://doi.org/10.1063/1.1920428
  7. S. X. Dou, V. Braccini, S. Soltanian, R. Klie and Y. Zhu, S. Li, X. L. Wang and D. Larbalestier, "Nanoscale-SiC doping for enhancing Jc and $Hc_2$ in superconducting $MgB_2$" J. Appl. Phys, Vol. 96, No. 12, 7549-7555, 2004 https://doi.org/10.1063/1.1814415
  8. A J Zambano, A R Moodenbaugh and L D Cooley, "Effects of different reactions on composition homogeneity and superconducting properties of Al-doped $MgB_2$" Supercond. Sci. Technol. 18, 1411-1420, 2005 https://doi.org/10.1088/0953-2048/18/11/001
  9. Akiyasu Yamamoto, Jun-ichi Shimoyama, Shinya Ueda, Yukari Katsura, Shigeru Horii and Kohji Kishio, "Improved critical current properties observed in $MgB_2$ bulks synthesized by low-temperature solid-state reaction" Supercond. Sci. Technol. 18, 116-121, 2005 https://doi.org/10.1088/0953-2048/18/1/019
  10. W Habler1, B Birajdar, WGruner, M Herrmann, O Perner, C Rodig, M Schubert, B Holzapfel, O Eibl and L Schultz, "$MgB_2$ bulk and tapes prepared by mechanical alloying: influence of the boron precursor powder" Supercond. Sci. Technol. 19, 512-520, 2006 https://doi.org/10.1088/0953-2048/19/6/018
  11. Sebahattin Gurmen, Srecko Stopic, Bernd Friedrich, "Synthesis of nanosized spherical cobalt powder by ultrasonic spray pyrolysis" Materials Research Bulletin 41, 1882-1890, 2006 https://doi.org/10.1016/j.materresbull.2006.03.006
  12. R.J. Lang, J. Acoust, "Ultrasonic Atomization of Liquids" Soc. Am. 43, 1962
  13. K. Froment , J. Fouletier, M. Fouletier, "Carbon activity measurement using a solid state potentiometric cell" J. Appl. Electrochem. 21, 175-180, 1991 https://doi.org/10.1007/BF01464300