조명전기설비학회논문지 (Journal of the Korean Institute of Illuminating and Electrical Installation Engineers)

  • 제22권3호
  • /
  • Pages.66-73
  • /
  • 2008
  • /
  • 1229-4691(pISSN)
  • /
  • 2287-5034(eISSN)
한국조명전기설비학회 (The Korean Institute of IIIuminating and Electrical Installation Engineers)
권호 표지
DOI QR코드

DOI QR Code

A Position Sensorless Control System of SRM over Wide Speed Range

  • Baik, Won-Sik (Department of Electrical Engineering at Yeungnam University)
  • 발행 : 2008.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a position sensorless control system of SRM over wide speed range. Due to the doubly salient structure of the SRM, the phase inductance varies along with the rotor position. Most of the sensorless control techniques are based on the fact that the magnetic status of the SRM is a function of the angular rotor position. The rotor position estimation of the SRM is somewhat difficult because of its highly nonlinear magnetizing characteristics. In order to estimate more accurate rotor position over wide speed range, Neural Network is used for this highly nonlinear function approximation. Magnetizing data patterns of the prototype 1-hp SRM are obtained from locked rotor test, and used for the Neural Network training data set. Through measurement of the flux-linkage and phase currents, rotor position is able to estimate from current-flux-rotor position lookup table which is constructed from trained Neural Network. Experimental results for a 1-hp SRM over 16:1 speed range are presented for the verification of the proposed sensorless control algorithm.

키워드

참고문헌

  1. T.J.E. Miller, Electronic Control of Switched Reluctance Machines, Newnes Publication, 2003
  2. B.K. Boss, Modern Power Electronics and AC Drives, Prentice Hall PRT, 2002
  3. G.G. Lopez, P.C. Kjaer, T.J.E. Miller, "High-Grade Position Estimation for SRM Drives using Flux Linkage/Current Correction Model," IEEE Trans. on IA, Vol. 35, No. 4, pp. 859-869, July/Aug., 1999
  4. E. Mese, D.A. Torry, "An Approach for Sensorless Position Estimation for Switched Reluctance Motors Using Neural Networks", IEEE Trans. on PE, Vol. 17, No. 1, pp. 66-75, Jan, 2002
  5. W.S. Baik, D.H. Kim, M.H. Kim, "A Hysteresis & PI Current Controller Response characteristic of SRM," Trans. of KIIEE, Vol. 21, No. 5, pp. 25-31, June, 2007
  6. A. Ferrero, A. Raciti, "A digital method for the determination of the magnetic characteristic of variable reluctance motors", IEEE Trans. on Instrum. & Meas., Vol. 39, No. 4, pp. 604-608, Aug., 1990 https://doi.org/10.1109/19.57241
  7. A.D. Cheok, Z. Wang, "DSP-Based Automated Error-Reducing Flux-Linkage-Measurement Method for Switched Reluctance Motors", IEEE Trans. on Instrum. & Meas., Vol. 56, No. 6, pp. 2245-2253, Dec., 2007 https://doi.org/10.1109/TIM.2007.904562
  8. M.H. Kim, M.G. Simoes, B.K. Boss, "Neural Network-Based Estimation of Power Electronic Waveforms," IEEE Trans. on PE, Vol. 11, No. 2, pp. 383- 389, March, 1996
  9. Peter Vas, Artificial-Intelligence-Based Electrical Machines and Drives, Oxford Science Pub, 1999
  10. W.S. Baik, M.H. Kim, N.H. Kim, D.H. Kim, "Position Sensorless Control System of SRM using Neural Network", Proceedings of PESC, pp. 3471-3475, June, 2004