Performance Analysis of an Industrial Inkjet Printing Head Using the 1D Lumped Model

  • Sim, Won-Chul (eMD Center. Central R&D Institute, Samsung Electro-Mechanics Co., Ltd.) ;
  • Park, Sung-Jun (Department of Mechanical Engineering, Chungju National University) ;
  • Joung, Jae-Woo (eMD Center. Central R&D Institute, Samsung Electro-Mechanics Co., Ltd.)
  • Published : 2008.04.01

Abstract

A design approach using a one-dimensional (1D) lumped model was studied and applied to an industrial inkjet printing head design for micro patterning on printed circuit boards. For an accurate analysis, a three-dimensional piezoelectric-driven actuator model was analyzed and its jetting characteristics were applied to 1Danalysis model. The performance of the 1D lumped model was verified by comparing measured and simulated results. The developed 1D model helped to optimize the design and configuration of the inkjet head and could be implemented in the design of multi-nozzle inkjet printing heads to improve the jetting frequency and minimize crosstalk.

Keywords

References

  1. Legierse, P. E. J., "Inkjet Printing in the Electronics Industry," Digital Production Printing and Industrial Applications: Eye on the Future, Vol. 1, pp. 197-200, 2001
  2. Stephen, F., "Inkjet Technology and Product Development Strategies," Torrey Pines Research, pp. 198-201, 2000
  3. Kyser, E. L., Collins, L. F. and Herbert, N., "Design of an Impulse Inkjet," Journal of Applied Photographic Engineering, Vol. 7, No. 3, pp. 73-79, 1981
  4. Kyser, E. L. and Sears, S. B., "Method and Apparatus for Recording with Writing Fluids and Drop Projection Means therefore," U.S. Patent, No. 3946398, Siliconics Inc., 1976
  5. Sim, W., Park, S-J., Park, C., Kim, C. S., Yoo, Y., Yang, C., Kim S., Kim, Y., Yang, J., Joung, J. and Oh, Y., "Analysis of the Droplet Ejection for Piezoelectric-driven Industrial Inkjet Head," NSTI-Nanotech, Vol. 2, pp. 528-533, 2006