References
- Moriuchi, T., Han, Y. and Furukawa, Y., "Development of Direct Photosynthetic/Metabolic Bio-Fuel Cell," The 3rd International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Digest of Technical Papers, pp. 361-364, 2005
- Morishima, K., Yoshida, M., Furuya, A., Moriuchi, T., Ota, M. and Furukawa, Y., "Improving the Performance of a Direct Photosynthetic/Metabolic Bio-fuel Cell(DPBFC) Using Gene Manipulated Bacteria," Journal of Micromechanics And Microengineering, Institute of Physics Publishing, Vol. 17, No. 9, pp. 274-279, 2007 https://doi.org/10.1088/0960-1317/17/9/S10
- Yang, D. Y., Lim, T. W., Son, Y., Kong, H. J., Lee, K. S., Kim, D. P. and Park, S. H., "Additive Process Using Femto-second Laser for Manufacturing Three-dimensional Nano/Micro-structures," International Journal of Precision Engineering and Manufacturing, Vol. 8, No. 4, pp. 63-69, 2007
- Kobayashi, H., Moronuki, N. and Kaneko, A., "Self-assembly of Fine Particles Applied to the Production of Antireflective Surfaces," International Journal of Precision Engineering and Manufacturing, Vol. 9, No. 1, pp. 25-29, 2008
- Chun, D. M., Kim, M. H., Lee, J. C. and Ahn, S. H., "A Nano-particle Deposition System for Ceramic and Metal Coating at Room Temperature and Low Vacuum Conditions," International Journal of Precision Engineering and Manufacturing, Vol. 9, No. 1, pp. 51-53, 2008
- Shin, B. S., Kim, J. G., Chang, W. S. and Whang, K. H., "Rapid Manufacturing of 3D Micro-products using UV Laser Ablation and Phase-change Filling," International Journal of Precision Engineering and Manufacturing, Vol. 7, No. 3, pp. 56-59, 2006
- Chang, W. S., Choi, M. N., Kim, J. G., Cho, S. H. and Whang, K. H., "Thin Film Micromachining Using Femtosecond Laser Photo Patterning of Organic Self-assembled Monolayers," International Journal of Precision Engineering and Manufacturing, Vol. 7, No. 1, pp. 13-17, 2006
- Zhou, J. and Yang, G., "Nanohole Fabrication using FIB, EB and AFM for Biomedical Applications," International Journal of Precision Engineering and Manufacturing, Vol. 7, No. 4, pp. 18-22, 2006
- Furukawa, Y., Moriuchi, T. and Morishima, K., "Design Principle and Prototyping of a Direct Photosynthetic/Metabolic Biofuel Cell (DPMFC)," Journal of Micromechanics And Microengineering, Institute of Physics Publishing, Vol. 16, No. 9, pp. 220-225, 2006 https://doi.org/10.1088/0960-1317/16/9/S08
- Lindermeir, A., Rosenthal, G., Kunz, U. and Hoffmann, U., "On the Question of MEA Preparation for DMFCs," Journal of Power Sources, Vol. 129, Issue 2, pp. 180-187, 2004 https://doi.org/10.1016/j.jpowsour.2003.11.002
- Schueller, O. J. A., Brittain, S. T. and Whitesides, G. M., "Fabrication of Glassy Carbon Microstructures by Soft Lithography," Sensors and Actuators, Vol. A72, Issue 2, pp. 125-139, 1999
- Park, B. Y. and Madou, M. J., "Miniature PEM Fuel Cell with Pyrolyzed Carbon Microfluidic Plates,"Digest of Technical Papers, pp. 105-108, 2006
- Yamamoto, K., Naka, K., Nagaura, Y., Sato, H., Shoji, S. and Konishi, S., "Pyrolyzed Polymer Mesh Electrode Integrated into Fluidic Channel for Gate Type Sensor," Digest of Technical Papers, pp. 271-274, 2007
- Bidez III, P. R., Li, S., Macdiarmid, A. G., Venancio, E. C., Wei, Y. and Lelkes, P. I., "Polyaniline, an Electroactive Polymer, Supports Adhesion and Proliferation of Cardiac Myoblasts," J. Biomater. Sci. Polymer Edn., Vol. 17, No. 1-2, pp. 199-212, 2006 https://doi.org/10.1163/156856206774879180
- Li, M., Guo, Y., Wei, Y., Macdiarmid, A. G. and Lelkes, P. I., "Electrospinning Polyaniline-contained Gelatin Nanofibers for Tissue Engineering Applications," Biomaterials, Vol. 27, Issue 13, pp. 2705-2715, 2006 https://doi.org/10.1016/j.biomaterials.2005.11.037