참고문헌
- Bernardi, D. M. and Verbrugge, M. W., 1991, “Mathematical Model of a Gas Diffusion Electrode Bonded to a Polymer Electrolyte,” AIChE Journal, 37(8), pp. 1151-1163 https://doi.org/10.1002/aic.690370805
- Bernardi, D. M., and Verbrugge, M. W., 1992, “A Mathematical Model of the Solid-Polymer-Electrolyte Fuel Cell,” J. of Electrochemical Society, 139(9), pp.2477-2491 https://doi.org/10.1149/1.2221251
- Springer, T. E., Zawodzinski, T. A. and Gottesfeld, S., 1991, “Polymer Electrolyte Fuel Cell Model,” J. of Electrochemical Society, 138(8), pp. 2334-2342 https://doi.org/10.1149/1.2085971
- Springer, T. E., Wilson, M. S. and Gottesfeld, S., 1993, “Modeling of Experimental Diagnostics in Polymer Electrolyte Fuel Cells,” J. of Electrochemical Society, 140(12), pp. 3513-3526 https://doi.org/10.1149/1.2221120
- Fuller T.F. and Newman, J., 1993, “Water and Thermal Management in Solid-Polymer-Electrolyte Fuel Cells,” J. of Electrochemical Society, 140(5), pp. 1218-225 https://doi.org/10.1149/1.2220960
- Nguyen, T. V. and White, R. E., 1993, “A Water and Heat Management Model for Proton-Exchange Membrane Fuel Cells,” J. of Electrochemical Society,140(8), pp. 2178-186 https://doi.org/10.1149/1.2220792
- Matthew H. Fronk, David L. Wetter, David A. Masten and Andrew Bosco, “PEM Fuel Cell System Solution for Transportation”, SAE 2000-01-0373
- James A. Adams, Woong-chul Yang, Keith A. Oglesby and Kurt D. Osborne, “The Development of Ford's P2000 Fuel Cell Vehicle”, SAE 2000-01-1061
- Broka, K. and Ekdunge, P., 1997, “Modeling the PEM Fuel Cell Cathode,” J. of Applied Electrochemistry, 27, pp. 281-289 https://doi.org/10.1023/A:1018476612810
- Parthasarathy, A., Srinivasan, S., Appleby, A. J., and Martin, C.R., 1992, “Temperature Dependence of the Electrode Kinetics of Oxygen Reduction at the Platinum/ Nafion Interface- A Microelectrode Investigation.,” J. of Electrochemical Society, 139(9),pp. 2530-2537 https://doi.org/10.1149/1.2221258
- DOE Hydrogen Program, FY 2004 Progress Report, pp. 366-372
- Endoh, E., Terazono, S., widjaja, H., and Takimoto, Y., 2004, “Degradation Study of MEA for PEMFCs under Low Humidity Conditions,” Electrochemical and Solid-State Letters, 7(7) A209-A211 https://doi.org/10.1149/1.1739314
- Dunwoody, D. and Leddy, J., Fall 2005, “Proton Exchange Membranes: The view Forward and Back,” The Electrochemical Society Interface, pp.37-39
-
Li, Q., He, R., Jensen, J. O., and Bjerrum, N. J., 2003, “Approaches and Recent Development of Polymer Electrolyte Membranes for Fuel Cells Operating above
$100{^\circ}C$ https://doi.org/10.1021/cm0310519,” Chem. Mater., Vol.15, No.26, pp. 4896-4915 - Yang, C., Costamagna, P., Srinivasan, S., Benziger, J. and Bocarsly, A. B., 2001, “Approaches and Technical Challenges to High Temperature Operation of Proton Exchange Membrane Fuel Cells,” Journal of Power Sources 103 pp.1-9 https://doi.org/10.1016/S0378-7753(01)00812-6
- Gasteiger, H. A., and Mathias, M. F., 2004, “Fundamental Research and Development Challenges in Polymer Electrolyte Fuel Cell Technology,” Proceedings of Third International Symposium on Proton Conducting Membrane Fuel Cells, pp.1-24
- Incropera, F.P., and DeWitt, D.P., 1996, Fundamentals of Heat and Mass Transfer, JOHN WILEY & SONS, New York, Fourth Edition, pp. 420-450
- Jung, D., Assanis, D. N., 2006, “Numerical Modeling of Cross Flow Compact Heat Exchanger with Louvered Fins using Thermal Resistance Concept,” SAE Technical Paper Series. No. 2006-01- 0726, Society of Automotive Engineers
- Yu, S., Jung, D., Assanis, D., N., 2006, “Numerical Modeling of the Proton Exchange Membrane Fuel Cell for Thermal Management,” Proceedings of The 4th International Conference on FUEL CELL SCIENCE, ENGINEERING and TECHNOLOGY, FUELCELL 2006-97062