Design & Manufacturing
- 제2권4호
- /
- Pages.1-4
- /
- 2008
- /
- 2800-0323(pISSN)
- /
- 2733-452X(eISSN)
가공방법에 따른 소형 도광판용 광학패턴 금형의 표면특성연구
Surface characteristics on the optical pattern die of light guiding plate by machining types
- 도영수 (한국생산기술연구원 정밀금형팀) ;
- 김종선 (단국대학교 기계공학과) ;
- 고영배 (단국대학교 기계공학과) ;
- 김종덕 (단국대학교 기계공학과) ;
-
윤경환
(단국대학교 기계공학과) ;
-
황철진
(단국대학교 기계공학과)
- Do, Young-Soo (KITECH, Precision Dies & Molds Team) ;
- Kim, Jong-Sun (Department of Mechanical Engineering, Dankook University) ;
- Go, Young-Bae (Department of Mechanical Engineering, Dankook University) ;
- Kim, Jong Duck (Department of Mechanical Engineering, Dankook University) ;
-
Yoon, Kyung-Hwan
(Department of Mechanical Engineering, Dankook University) ;
-
Hwang, Chul-Jin
(Department of Mechanical Engineering, Dankook University)
- 투고 : 2008.04.28
- 심사 : 2008.06.26
- 발행 : 2008.08.01
초록
Micro pattern is applied to the light guiding plate(LGP) to enhance the uniformity of the brightness of the LCD. The micro cones are molded in intaglio on the surface of the LGP. The surface roughness of each cone was 40nm and 38nm in negative and positive die for laser ablation. In chemical etching, the surface roughness was 25nm, 24nm in negative and positive. And the surface roughness of negative and positive dies were 4nm and 5nm for LIGA-reflow process.