References
- Diane, L., Bernhard W., Jens Von W., Stefan D. and Roland L., 2007, 'Heat Transfer Enhancement by Impingement Cooling in a Combustor Liner Heat Shield,' IGTI 2007, ASME Paper No. GT2007-27908
- Ronald S. Bunker and Jeremy C. Bailey, 2005, 'Turbine Blade Platform Impingement Cooling with Effects of Film Extraction and Roughness,' IGTI 2005, ASME Paper No. GT2005-68415
- Hollwarth, B. R., Lehmann, G. and Rosiczkowski, J., 1983, 'Arrays of Impinging Jets with Spent Fluid Removal Through Vent Holes on the Target Surface Part 2: Local Heat Transfer,' J. of Engineering for Power, Vol. 105, pp. 393-402 https://doi.org/10.1115/1.3227428
- Cho, H. H. and Goldstein, R. J., 1996, 'Effect of Hole Arrangements on Impingement/ Effusion Cooling,' Proceeding of the 3rd KSME-JSME Thermal Engineering Conference, pp. 71-76
- Cho, H. H. and Rhee, D. H., 2001, 'Local Heat/Mass Transfer Measurement on the Effusion Plate in Impingement/Effusion Cooling System,' J. of Turbomachinery, Vol. 123, pp. 601-608 https://doi.org/10.1115/1.1344904
- Yoon, P. H., Rhee, D. H. and Cho, H. H., 2001, 'Flow and Heat/Mass Transfer Characteristics of Arrays of Impingement Jets with Effusion Holes,' Trans. of KSME (B), Vol. 25, No. 11, pp. 1606-1615
- Golestein, R. J. and Franchett, M. E. 1988, 'Heat Transfer From a Flat Surface to an Oblique Impinging Jet,' J. of Heat Transfer, Vol. 110, pp. 84-90 https://doi.org/10.1115/1.3250477
- Lim, K. B., Lee, C. H. and Lee, S. H., 2006, 'A Study on the Heat Transfer Characteristics of Turbulent Round Jet Impinging on the Inclined Concave Surface Using Transient Liquid Crystal Method,' Trans. of KSME (B), Vol. 30, No. 7, pp. 656-662 https://doi.org/10.3795/KSME-B.2006.30.7.656
- Rhee, D. H., Choi, J. H. and Cho, H. H., 2002, 'Flow and Heat (Mass) Transfer Characteristics in an Impingement/Effusion Cooling System with Cross flow,' J. of Turbomachinery, Vol. 125, pp. 74-82 https://doi.org/10.1115/1.1519835
- Rhee, D. H., Nam, Y. W. and Cho, H. H., 'Heat/Mass Transfer Characteristics on Rib-roughened Surface for Impingement/Effusion Cooling System with Initial Crossflow,' Trans. of KSME(B), Vol. 28, No. 3, pp. 338-348
- Hong, S. K., Rhee, D. H. and Cho, H. H., 2005, 'Heat/Mass Transfer on Effusion Plate with Circular Pin Fins for Impingement/Effusion Cooling System with Intial Crossflow,' Trans. of KSME (B), Vol. 29, No. 7, pp. 828-836
- Goldstein, R. J. and Cho, H. H., 1995, 'A Review of Mass Transfer Measurement Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434 https://doi.org/10.1016/0894-1777(94)00071-F
- Eckert, E. R. G., 1976, 'Analogies to Heat Transfer Processes,' in Measurements in Heat Transfer, ed. Eckert, E. R. G. and Goldstein, R. J., pp. 397-423, Hemisphere Pub., New York
- Abernethy, R. B., Benedict, R. P. and Dowdell, R. B. 1985, 'Measurement Uncertainty,' Journal of Fluid Engineering, Vol. 107, pp. 161-164 https://doi.org/10.1115/1.3242450
Cited by
- A Study on the Model of Thermal Plume Flow in the Forest Fire vol.12, pp.1, 2009, https://doi.org/10.5293/KFMA.2009.12.1.007
- vol.12, pp.1, 2009, https://doi.org/10.5293/KFMA.2009.12.1.070