DOI QR코드

DOI QR Code

Evaluation of Corrosion Characteristics on Welding Zone of Leakage SeawaterPipe Welded by Underwater Welding Electrode

수중 용접봉으로 용접한 누수배관 용접부위의 부식 특성 평가

  • 문경만 (한국해양대학교 공과대학 기계소재공학부) ;
  • 이성열 (한국해양대학교 공과대학 기계소재공학부) ;
  • 김윤해 (한국해양대학교 공과대학 기계소재공학부) ;
  • 이명훈 (한국해양대학교 해사대학 기관시스템공학부) ;
  • 김진경 (한국해양수산연수원 교육연구처)
  • Published : 2008.11.30

Abstract

Leakage trouble on the sea water pipeline in engine room is often resulted from a localized corrosion due to severe corrosive environment caused by both high speed and high pressure of sea water flowing through the inner pipe. In addition, when the ship is in stand-by or emergency condition, underwater welding to control the leakage of sea water from a hole of its pipe is very important in an industrial safety point of view. In this study possibility of underwater welding to control leakage of sea water and corrosion property of its welding zone were investigated with the electrochemical methods by parameters of welding methods and welding electrodes when underwater welding is achieved with a such case that sea water is being leaked out with a height at 50mm from a hole of $2.5mm{\emptyset}$ of test pipe. Corrosion resistance of weld metal zone is better than the base metal and its hardness is higher than that of the base metal. However corrosion potential of weld metal zone showed a negative value than that of the base metal, therefore weld metal zone is preferentially corroded rather than the base metal by performance of galvanic cell due to difference of corrosion potential between weld metal zone and base metal. Eventually it is suggested that leakage of sea water is successfully controlled by underwater welding,

Keywords

References

  1. 김민남, 김복인, 한정동, "습식수중 용접봉의 기계적 성질에 관한 연구", 한국해양공학회지, 제14권, 제4호, pp. 56-61, 2000
  2. 김복인, 노창석, 정교헌, 김민남, "피복성분에 의한 수중용접봉의 아크 안정성 개선에 관한 연구", 한국해양공학회지, 제15권, 제4호, pp. 75-79, 2001
  3. 김진경, 강명신, 김영식, "선박용 디젤기관의 주철 부품 보수 용접 특성에 관한 연구", 한국해양공학회지, 제20권, 제2호, pp.41-45, 2006
  4. 안석환, 정정환, 남기우, "용접 열사이클재현에 의한 SS400강 및 STS304강의 특성평가", 한국해양공학회지, 제19권, 제4호, pp. 64-71, 2005
  5. 오종인, 김영표, 박호경, 방한서, "선체구조용 A급 강재의 하이브리드 용접에 대한 열 및 역학적 특성에 관한 연구", 한국해양공학회지, 제21권, 제1호, pp64-68, 2007
  6. S.K.Jang and J.I.Jeon, "Wedability of A1 7075 Alloy According to Different Tools and Welding Conditions by F.S.W.", Journal of the Korean Society of Marine Engineering, Vol.30, No.1, pp. 30-41, 2006
  7. J.D.Kim, B.L.Kil and C.J.Lee, "The Weldability of haminated Stator Core for Motor by Pulsed Nd:YAG Laser[I]", Journal of the Korean Society of Marine Engineering, Vol.30, No.5,pp. 629-635, 2006
  8. J.D.Kim, S.J.Yoo and J.S.Kim, "Optimization of Pulsed Nd:YAG Laser Welding Conditions for Sealing of Lithium-ion Battery", Journal of the Korean Society of Marine Engineering, Vol. 30, No. 5, pp. 623-628, 2006
  9. P.D.Bilmes, C.L.Liorente, Saire Huaman, L.M.Gassa and C.A.Gervasi, "Microstructure and Pitting Corrosion of 13CrNiMo Weld Metal", Corrosion Science, Vol.48, pp. 3261-3270, 2006 https://doi.org/10.1016/j.corsci.2005.10.009
  10. Y.H.Lee, Y.H.Kim and H.Kim, "Crevice Corrosion Resistance of Stainless Steel in Natural Sea Water With Different Post Welding Treatment", CORROSIO SCIENCE AND TECHNOLOGY, Vol. 31, No. 5, pp. 219-224, 2003
  11. I.H.Lo, M.C.Lee, K.Y.Lim, W.Ho, G.C.Y.Yang and W.T.Tsai, "Effect of heat Treatment on the Pitting Corrosion Behavior of 347SS Weld Overlay", CORROSIO SCIENCE AND TECHNOLOGY, Vol. 31, No. 5, pp. 361-367, 2002
  12. K.M.Moom, M.H.Lee, K.J.Kim, J.G.Kim and S.J.Kim, "A Study on the Post-weld Heat Treatment Effect to Mechanical Properties and Hydrogen Embrittlement for Heating Affected Zone of a RE36 Steel", CORROSIO SCIENCE AND TECHNOLOGY, Vol. 2, No. 6, pp. 283-288, 2003
  13. V.S.Raja, S.K.Vershney, R.Raman and S.D.Kulkarni, "Influence of Nitrogen on the Pitting Corrosion Behavior of 904L weld Clad", Corrosion Science, Vol.40,No.10, pp. 1609-1625, 1998 https://doi.org/10.1016/S0010-938X(97)00174-1
  14. L.W.Tsay, W.L.Lin, S.W.Chenct and G.S Leu, "Hydrogen Sulphide Stress Corrosion Cracking of 2.25 Cr-Mo Steel Weldments", Corrosion Science, Vol. 39, No. 7, pp. 1165-1176, 1997 https://doi.org/10.1016/S0010-938X(97)00015-2
  15. S.H.Frederick, H.Capper, "Materials for Marine Machinery", Marina Media Management, p. 221, 1976
  16. 전대희, "부식과 방식의 관리" 일중사, pp. 101-103, 1985
  17. Takeo, "Effect of Various Factors, Mechanism and Prvention Methods of grooving corrosion of ERW and CBW Carbon Steel pipes", Kawasaki Seidetsugiho, Vol.11, No.3, pp.326-330, 1979
  18. 전대희, 부식과 방식의 관리, 일중사, pp. 294-298, 1985
  19. 신민교, 기계공작법, 아성출판사, pp. 242-245, 1987
  20. 김진경, 조황래, 이명훈, 김윤해, 문경만, "5% 황산 용액에서 배기벨브 보수 용접부의 부식특성에 미치는 용접방법과 용접봉의 영향", 한국 마린 엔지니어링 학회지, 제31권, 제6호, pp. 744-752, 2007 https://doi.org/10.5916/jkosme.2007.31.6.744
  21. D.A.Jones, "Principles and Prevention of Corrosion", Original American Edition Published by Prentice-Hall, Inc., p. 314, 1998
  22. 김진경, 원창욱, 조황래, 이명훈, 김윤해, 문경만, "용접재료별 해수배관 용접부위의 부식특성에 관한 전기화학적 평가", 한국해양공학회지, 제21권, 제5호, pp. 34-46, 2007

Cited by

  1. Study of the high pressure hose assemblies by accelerated life test vol.37, pp.8, 2013, https://doi.org/10.5916/jkosme.2013.37.8.886
  2. 자연해수 내 탄소강의 전기화학적 분극실험에 관한 연구 vol.42, pp.4, 2008, https://doi.org/10.5916/jkosme.2018.42.4.274