Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Improvement of Material Characteristics by Control of Ion Implantation

이온주입 제어에 의한 재료특성 개선에 관한 연구

  • Published : 2008.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, techniques of ion implantation were used in order to improve the characteristics of metal materials such as the oxidation and wear resistant. In particular it is necessary to develope their oxidation and wear resistant that could be used in severe environmental conditions. There are mainly two elementary technologies including ion implantation and/or thin film coating. Ion implantation method was performed for surface modification. As a result, it was found that some ion implantations methods such as Nb, high-temperature Nb ion implantation and Nb+C combined implantation are somewhat effective for improving the oxidation resistance of TiAl alloy. Furthermore, the fluorine PBII treatment is more effective for improving the oxidation resistance of the TiAl alloy with three-dimensional shapes. The implantation of boron ion into thin film of TiN was also effective for improving the properties of materials like high temperature wear resistance. TiCrN film was applied to the actual seal ring for steam turbines, and it was observed that its sliding property showed a successfully good performance.

Keywords

References

  1. 임종한, 윤준규, "V8형 TCI 디젤기관의 배출가스저감 및 성능개선에 관한 연구", 한국마린엔지니어링학회지, 제29권, 제4호, pp.443-452, 2005
  2. 오송열, 김래현, 한희준, 문장수, 김희준, "원소분석을 통한 바이오매스에 도시형 유기성 폐기물을 혼합한 신연료의 고위발열량 예측", 에너지공학회지, 제16권, 제4호, pp.194-201, 2007
  3. S. Taniguchi, T. Kuwayama, Y. C. Zhu, Y. Matsumoto and T. Shibata, "Influence of Silicon Ion Implantation and Post-implantation Annealing on the Oxidation Behavior of TiAl under Thermal Cycle Conditions", Materials Science and Engineering, Vol.277, pp.229-236, 2000 https://doi.org/10.1016/S0921-5093(99)00542-0
  4. K. Y. Rhee, C. H. Chi and J. H. Yang, "A Study on the Surface Treatment of Prepreg with Ar+ ion to Increase I Fracture Characteristics of Fiber- Reinforced Composites", Transaction of the KSME, Vol.24, No.11, pp.2771-2776, 2000
  5. V.A.C. Haanappel and M.F. Stroosnijder, "The Effect of Ion Implantation on the Oxidation Behavior of TiAl-based Intermetallic Alloys at $900^{\circ}C$", Int. J. of Surface and Coatings Technology, Vol.105, pp.147-154, 1998 https://doi.org/10.1016/S0257-8972(98)00472-1
  6. 김정일, 장석기, 김성종, "다양한 화성처리 용액 조건에서 마그네슘-알루미늄 합금위에 형성된 박막의 특성 평가", 한국마린엔지니어링학회지, 제29권, 제1호, pp.98-106, 2005
  7. M. Tuszewski, J. T. Scheuer and R. A. Adler, "A Pulsed Inductively Coupled Plasma Source for Plasma-based Ion Implantation", Int. J. of Surface and Coatings Technology, Vol.93, pp.203-208, 1997 https://doi.org/10.1016/S0257-8972(97)00045-5
  8. R. J. Adler and S. T. Picraux, "Repetitively Pulsed Metal Ion Beams for Ion Implantation", Nuclear Instruments and Methods in Physics Research Section B : Beam Interaction with Materials and Atoms, Vol.6, pp.123-128, 1985 https://doi.org/10.1016/0168-583X(85)90621-4
  9. R. Wei, "Low Energy, High Current Density Ion Implantation for Materials at Elevated Temperature for Tribological Applications", Int. J. of Surface and Coatings Technology, Vol.83, pp.218-227, 1996 https://doi.org/10.1016/0257-8972(95)02828-5
  10. X. Y. Li, S. Taniguchi, Y. C. Zhu, K. Fujita, N. Iwamoto, Y. Matsunaga and K. Nakagawa, "Oxidation Behavior of TiAl Protected by Si+Nb Combined Ion Implantation", Intermetallics, Vol.9, pp.443-449, 2001 https://doi.org/10.1016/S0966-9795(01)00024-3
  11. Y. C. Zhu, K. Fujita, N. Iwamoto, H. Nagasaka and T. Kataoka, "Influence of Boron Ion Implantation on the Wear Resistance of TiAlN Coatings", Int. J. of Surface and Coatings Technology, Vol.158-159, pp.664-668, 2002 https://doi.org/10.1016/S0257-8972(02)00238-4