References
- J. W. Baek and D. J. Kim, "Ceramic Foams by the Self- Blowing of Polymer (in Kor)," J. Kor. Ceram. Soc., 41 [7] 555-59 (2004) https://doi.org/10.4191/KCERS.2004.41.7.555
-
D. B. Kim, D.-S. Park, B. D. Hahn, and Y. G. Jung, "Effect of
Si/Si_3N_4$ Ratio on the Microstructure and Properties of Porous Silicon Nitride Prepared by SHS Method (in Kor)," J. Kor. Ceram. Soc., 44 [6] 338-42 (2007) https://doi.org/10.4191/KCERS.2007.44.6.338 - J. Adler, "Ceramic Diesel Particulate Filters," Int. J. Appl. Ceram. Technol., 2 [6] 429-39 (2005) https://doi.org/10.1111/j.1744-7402.2005.02044.x
- M. Fukushima, Y. Zhou, H. Miyazaki, Y. Yoshizawa, K. Hirao, Y. Iwamoto, S. Yamazaki, and T. Nagano, "Microstructural Characterization of Porous Silicon Carbide Membrane Support with and without Alumina Additive," J. Am. Ceram. Soc., 89 [5] 1523-29 (2006) https://doi.org/10.1111/j.1551-2916.2006.00931.x
- S. H. Lee and Y.-W. Kim, "Processing of Cellular SiC Ceramics Using Polymer Microbeads," J. Kor. Ceram. Soc., 43 [8] 458-62 (2006) https://doi.org/10.4191/KCERS.2006.43.8.458
- B. H. Yoon, E. J. Lee, H. E. Kim, and Y. H. Koh, "Highly Aligned Porous Silicon Carbide Ceramics by Freezing Polycarbosilane/ Camphene Solution," J. Am. Ceram. Soc., 90 [6] 1753-59 (2007) https://doi.org/10.1111/j.1551-2916.2007.01703.x
- Y.-W. Kim, S. H. Kim, I. H. Song, H. D. Kim, and C. B. Park, "Fabrication of Open-Cell, Microcellular Silicon Carbide Ceramics by Carbothermal Reduction," J. Am. Ceram. Soc., 88 [10] 2949-51 (2005) https://doi.org/10.1111/j.1551-2916.2005.00509.x
- I. K. Jun, Y. H. Koh, J. H. Song, S. H. Lee, and H. E. Kim, "Improved Compressive Strength of Reticulated Porous Zirconia Using Carbon Coated Polymeric Sponge As Novel Template," Mater. Lett., 60 2507-10 (2006) https://doi.org/10.1016/j.matlet.2006.01.031
-
A. K. Gain and B. T. Lee, "Microstructure Control of Continuously Porous
t-ZrO_2$ Bodies Fabricated by Multi-Pass Extrusion Process," Mater. Sci. & Eng. A, 419 269-75 (2006) https://doi.org/10.1016/j.msea.2005.12.033 - B. Nait-Ali, K. Haberko, H. Vesteghem, J. Absi, and D. S. Smith, "Thermal Conductivity of Highly Porous Zirconia," J. Europ. Ceram. Soc., 26 3567-74 (2006) https://doi.org/10.1016/j.jeurceramsoc.2005.11.011
- A. K. Gain, H. Y. Song, and B. T. Lee, "Microstructure and Mechanical Properties of Porous Yttria Stabilized Zirconia Ceramic Using Poly Methyl Methacrylate Powder," Scripta Mater., 54 2081-85 (2006) https://doi.org/10.1016/j.scriptamat.2006.03.009
- Z. Y. Deng, J. F. Yang, Y. Beppu, M. Ando, and T. Ohji, "Effect of Agglomeration on Mechanical Properties of Porous Zirconia Fabricated by Partial Sintering," J. Am. Ceram. Soc., 85 [8] 1961-65 (2002) https://doi.org/10.1111/j.1151-2916.2002.tb00388.x
- Y.-W. Kim, H. D. Kim, and C. B. Park, "Processing of Microcellular Mullite," J. Am. Ceram. Soc., 88 [12] 3311-15 (2005) https://doi.org/10.1111/j.1551-2916.2005.00597.x
Cited by
- Effects of Pre-sintered Granules on the Characteristics of Porous Zirconia vol.49, pp.6, 2012, https://doi.org/10.4191/kcers.2012.49.6.566
- Porosity Control in LSM Electrode Formation in Layered Plannar SOFC Module vol.27, pp.12, 2014, https://doi.org/10.4313/JKEM.2014.27.12.866
- Optimization for Permeability and Electrical Resistance of Porous Alumina-Based Ceramics vol.53, pp.5, 2016, https://doi.org/10.4191/kcers.2016.53.5.548